Process Engineer with 20+ Years in Chemical Plants
Resume:
Ricardo Reyes Lopez
*** - *** ********* ***, ******** Park, AB TB0 0B9.
Cell: 780-***-**** Home: 587-***-****
E-mail: ************@*****.**,
A. General information
Birthdate:
Status in Canada: Canadian Citizen
Marital Status:
Languages Spoken:
Date Available for Employment:
B. Education
University: Institute Polytechnic National, Mexico City, Mexico Industrial Chemical Engineering
Graduated 1990
Universidad National Autonoma de Mexico, Mexico City, Mexico Master's Degree in Project Engineering
Graduated 1995
Computer Skills: MS Office (Word, Excel, Power Point, Win project) AutoCAD, Simulation Programs: Hysys and Aspen Plus, PRO II, Promax, Flarenet HTRI, DWSIM, CADWorx, Compress, PV-Elite, S-Frame
APEGA: P.Eng Member 207343
British Columbia:. P.Eng. Member 227082
C. Experience
ENGINEERING
• Develop Process Design Basis (PDB), Process Flow Diagram, Heat & Mass balance, based on Business Development objectives.
• Execute and review Feasibility Studies / Conceptual Design / Process Studies / Detail Engineering Design
• Mechanical Design: Pressure Vessels, Structural Skids.
• Prepare Technical & Commercial Bids, Engineering & Pricing
• Capital and operating cost estimates,
• Development of plant layouts,
• Equipment Specification:
Pumps, compressors, blower, reactors, column distillation, column absorbers, refrigeration packages, chillers, cooling towers, boilers, HRSG, gas turbines, steam turbines, heat exchangers, separators, air compressors systems, gas conditions trains.
• Experience in an EPC and operating environment, pipelines, oil refining, power plants, cryogenics plants & chemical plants, Solids Handling.
• Oil Desalter & Oil Dehydrator Design, Heater Treater
• Sweetening Gas Plant (Amine Plants)
• Glycol Dehydration Plant (Glycol Units)
• Water treatment Plants, Boiler Feed Water, Condensate Treatment Plants 02-February-1967
Canadian Citizen
Married
English & Spanish
Immediately
• Develop mass balances and process simulation for process units
• Process Engineering support for the Pre-Commissioning, Commissioning and Start Up
• Process Studies and Recommendations of Path Forward
• Review vendor or subcontractor's quotations, drawing and specifications for technical adequacy and conformance with project requirements
• Process simulation (HYSYS) and stream table development
• Interact with Client Process Manager and other client representatives for technical issues
• Coordinate the engineering efforts in assigned areas among process group and other engineering groups or disciplines, suppliers and contractors
• Advise project team on process input to engineering team Process Engineer with experience in Process Design
• Design Bases.
• Preparation of process design criteria,
• Process Sketch.
• Experience with PFDs, H&MB, P&IDs, Management of Change, HAZOPs
• Complementary Information.
• Process Description
• Criteria in Process Design
• Operation Basic Philosophy
• Auxiliary Services Balance
• Auxiliary Services and chemicals Data Sheet
• Tower and Vessels Data Sheet, Mesh Data Sheet.
• Internal Data Sheet.
• Process Book.
• Plant commissioning,
• Package Equipment Specification.
• Requisition for process equipment.
• Working on safety in design, and process safety and risk analysis such as HAZOP. SYSTEM ENGINEERING
• Lines List.
• Technical - economical Table.
• Services Index.
• Instrument process specification and sizing of in-line devices
• Safety Relief Valves
• Flares headers
D. Professional Experience
1. Mar-Quinn Industries Ltd, 7115 Sparrow Drive, Leduc, Alberta, Canada T9E 5X1. Tel:780-***-**** Position: Project Engineer/Estimator/ Process Engineer/Mechanical Engineer from September 1 2023 up today, Job Description: Process and Mechanical Design, Estimation Cost, Prepare Bids for the following Equipment’s & Process:
- Dehydrators, Glycol Plants
- 3 Phase Separators
- Line Heaters, Heater Treater
- Separation Packages
- Pig Launcher
2. Thermodesign Engineering Ltd 1424 70 Ave NW, Edmonton, AB T6P 1P5Tel: 780-***-**** Supervisor: Brenden Mann
Position: Project Engineering from January 4th 2023 up to 17-July-2023, Job Description: Management of two projects:
- Condensate Stabilizer, Paramount, 6600 BPD
- Condensate Stabilizer, White Cap, 12500 BPD
3. Rushton Gas & Oil Equipment Ltd 2331 121 Ave NE, Edmonton, AB T6S 1B2. Tel: 780-***-****
Supervisor: Mark canning
Position: Engineering Manager r/ Process Engineer from August 4th 2020 up to Dec 16 2023, Job Description: Design and Prepare Bids for the following Equipment’s & Process:
- Dehydrators, Refrigeration
- Condensate Stabilization,- 3 Phase Separators
- Line Heaters
- Separation Package
- Amine Sweetening
4. MAR-QUINN INDUSTRIES LTD, 7115 Sparrow Drive, Leduc, Alberta, Canada T9E 5X1. Tel:780-986- 7805
Supervisor: Harvey Martin
Position: Estimator/ Process Engineer from March 9 2015 to June 3rd 2020, Job Description: Design and Prepare Bids for the following Equipment’s & Process:
- Dehydrators, Glycol Plants
- 3 Phase Separators
- Line Heaters
- Separation Package
3. AMR Process Inc., 5108D - 47th Street, Leduc, Alberta, Canada T9E 6Y9. Tel:780-***-**** Supervisor: Ashley Robbins
Position: Proposal Engineer from Feb/14 to Oct/14, Job Description: Prepare Bids for the following Equipment’s & Process:
- Desalter & Dehydrators
- Separators
- Glycol Plants
- Amine Plants
- Methanol Plants
- Engineering
4. Northam Engineering, Carlos Salazar #2333, Col. Obrera, C.P. 64010, Monterrey, N.L, Mexico Supervisor: Susana Ochoa
Position: Senior Process Engineer from May/2010 to Jan/2014, Job Description: Development Basic Engineering & Detail Engineering of Projects:
• Combined Cycle 1600 MW
Development Conceptual Engineering (OSBL)
• Hydro desulfurization Plant, Sulfur Recovery Unit, Hydrogen Plant, and Utilities 5. CDI-Engineering - PYCOPSA (Construction & Engineering Firm), Av. Hidalgo 5403 Col. Fraccionamiento Lomas del Naranjal. Tampico Tamps. Mexico. Phone: 833-***-**** Supervisor: Sergio Romero
Position: Senior Process Engineer from Nov/2007 to May/2010, Job Description: Development Basic Engineering & Detail Engineering of Projects:
• Fluoride Acid Plant (100 ton/d)
• Aluminum Fluoride AlF3 (200 ton/d)
6. UHDE-JACOBS MEXICO (Construction & Engineering Firm), Sierra Gamon No. 120 - Piso 7 Col. Lomas de Chapultepec 11000 Mexico, D.F. Mexico City, Mexico Phone: 55.5284.0200
Supervisor: Salvador Ortega
Position: Specialist Process Engineer from May/2005 to Nov/2007, Job Description: Development Basic Engineering & Detail Engineering of Projects:
• Auxiliary Services in Nuclear Power Plant, Pelimdaba, South Africa
• Flat Glass Plant (Saint Gobain) in Cuautla, Morelos (Mexico). Supervisor Development of Basic Engineering & Detail Engineering (Process & Mechanical, piping, vessels, tanks, etc.) of Project:
• Diesel Power Plant ( Baja California Sur II) 42.7 MW, Client : CFE Development of Basic Engineering & Detail Engineering of Projects:
• Increase Resins Production (New Prereactor) PPG Inc. San Juan del Rio, Queretaro. 7. ABENER MEXICO, Bah^a de Santa Barbara 174 Col. Veronica Anzures Mexico D.F. Phone: 5262-71-00 Ext. 1137
Supervisor: Jesus Zayas
Position: Process Engineer and Mechanical Engineer Lead from Sep/2003 to Oct./2004, Job Description: Supervising of Development Basic Engineering & Detail Engineering of Projects
• Supervising Design all major equipment. Gas Turbine, Steam Turbine, HRSG, Boiler Feed Water Pumps, Water Treatment Plant, Compression Air System, Process Pumps, Air Cooler, Chemicals Injection, Crane, Tanks (API), Pressure Vessels, Piping for BOP.
Process flow diagram, P & ID, Data Sheets, Technical Specifications, Operating Manual. Purchase Orders.
Project Value: 77 million dollars
• "Power Plant" Combined Cycle, for Mexican Government 88 MW in Hermosillo Sonora
(Mexico).
8. Envases de Acero, S.A. de C.V., Av. 1o de Mayo 151, Naucalpan Edo. De Mexico. Tel: 530004-88 Supervisor: Jesus Zayas
Position: Product Engineer from Mar/2003 to April/2003, Job Description: Supervising of Pressure Vessels Design (Cryogenic Tank, for Nitrogen 9. Work as advisor
Position: Process Engineer from Feb/2002 to Sep/2002, Job Description: Responsible for developing Basic and Detail Engineering Process flow diagram, P & ID, Data Sheets, Technical Specifications. Calculations. of project:
• Design for Perlite Process, Solids Handling for Chemical Plant Polioles S.A. de C.V. 10. INGENIERIA Y CONSTRUCCIONES FRU-CON S.A. DE C.V. (Construction & Engineering Firm), Mexico City. BONDOJITO NO 340 COL LAS AMERICAS, DELEG ALVARO OBREGON Mexico, Mexico, C P 011
supervisor: Kevin Anderson, Cell: 17935627 Phone: 5-6-69-06-03 Position: Process Engineer from May/1999 to Feb/2001, Job Description: Responsible for developing Basic and Detail Engineering on the following projects:
• Cogeneration Plant for Chemical Plant "PRIMEX", (Tampico, Mexico). Design all major equipment. Process flow diagram, P & ID, Data Sheets, Technical Specifications, Operating Manual. Purchase Orders. Project Value: 40 million dollars
• New Production Line for "Coca-Cola", (Cuautitlan, Mexico). Design all major equipment. Process flow diagram, P & ID, Data Sheets, Technical Specifications, Purchase Orders.
• New Plant Production for Sherwin Williams "SPITE FIRE", (Vallejo, Mexico). Design all major equipment. Process flow diagram, P & ID, Data Sheets, Technical Specifications, Purchase Orders.
• Cogeneration Plant for Paper Industry "FEMSA/TITAN", (Monterrey, Mexico). Design all major equipment. Process flow diagram, P & ID, Data Sheets, Technical Specifications, Operating manual. Purchase Orders. Project Value: 55 million dollars
11. GRUPO RIO SAN JUAN (Construction & Engineering Firm) Supervisor: Francisco Vivas Fayad, Phone: 52-60-60-20 Position: Process Engineer from Oct/1998 to May/1999, Job Description: Responsible for developing Basic and Detail Engineering on the following projects: Process flow diagram, P & ID, Data Sheets, Technical Specifications, Purchase Orders) on the following project:
• "Oil Separation Battery (Desalters & Dehydration Preheat Oil Feed) for PEMEX
(Petroleos Mexicanos, at Tabasco, Mexico Project Value: 300 million dollars 12. CRYOINFRA S.A. DE C.V. (Cryogenics Gas Producers), Felix Guzman No. 16 Col. El Parque, Naucalpan Edo. De Mexico. Mexico. Phone: 3-29-33-68/69 Supervisor: Mario Gomez
Position: Process Engineer from Jul/1995 to Oct/1998, Job Description: Responsible for developing Basic and Detail Engineering on the following projects
• Separation Air Plant (Cryogenic Plant) at (Villahermosa, Mexico)". Design all major auxiliary equipment. Process flow diagram, P & ID, Data Sheets, Technical Specifications, Purchase Orders.
Project Value: 35 million dollars
• Separation Air Plant (Cryogenic Plant) at (Puebla, Mexico)". Design all major auxiliary equipment. Process flow diagram, P & ID, Data Sheets, Technical Specifications, Purchase Orders.
Project Value: 70 million dollars
• Evaluation, Technical Support, Maintenance of Cryogenics Plants and Maintenance of Gas Oxygen and Nitrogen Plants, (PSA, VSA, Membranes), CO2 Plants. 13. BUFETE INDUSTRIAL (Construction & Engineering Firm), Moras 19 Col. Del Valle, Mexico City. Supervisor: Ricardo Rios
Position: Process Engineer from Jan/1995 to Jul/1995, Job Description: Responsible for developing Basic and Detail Engineering on the following projects: Process flow diagram, P & ID, Data Sheets, and Technical Specifications) on the following projects:
• Oxide of titanium Plant for DuPont, (Altamira, Mexico).
• HF Plant for DuPont in (Matamoros, Mexico).
DIPSA (Disenos Industriales y Procesos) (Engineering Firm) Supervisor: Julio Landgrave
Position: Process Engineer from Jun/1994 to Jan/1995, Job Description: Responsible for developing Basic and Detail Engineering on the following projects: Process flow diagram, P & ID, Data Sheets, Technical Specifications, on the following projects:
• Evaporation Process for Black Liquor from Paper Industry.
• Water Treatment Plant for Leather Industry.
UHDE (Construction & Engineering Firm)
Supervisor: Francisco Guerrero
Position: Sales Engineer from Jun/1993 to Jan/1995, Responsible for developing Technical and Economics Bids for Industrial Projects. Obtain bids on all major equipment and unit prices for bulk materials. Prepare definitive estimate of project costs.
E. Academic Experience
Universidad Nacional Autonoma de Mexico (UNAM), Mexico City. Professor of Process Engineering in the Master of Project Engineering.
Process Engineering
1995 - 1997
14.
15.
University:
Position:
Teaching Field:
Contact this candidate