Facilities Maintenance Technician with PPE/ISO Experience

VIENGSAVANH (VINNIE) THAVONG

***** ********* *** *** ***** Ca, 92126

Tel: 858-***-**** E-Mail: ************@*****.***

Objective: Facilities Mechanic Technician

A hard working highly motivated Facilities Mechanic with experience Team player and highly skilled at performing in fast paced environment. experience in the biotech industries responsible for trouble shooting, inspection, following engineering instructions, read blue prints and established company rules, regulations and safety precautions, and maintains quality standards. Understands the full cycle assembly process and knowledge of personal protective equipment (PPE). Working in an Aseptic Techniques and work in clean room . Strengths include communication, setting priorities, helping other, listening and training. Knowledge of OSHA safety requirements and training. ISO 9000, 9001, 14000 also Clean room Class 100 EDUCATION

Certificate, Electronic Technician, VCR, TV repaired, City College, Mesa College PROFESSIONAL EXPERIENCE

Bioserve Corporation Aug 2021- Sep 2023

Facilities Maintenance Technician

. The operations support by maintaining building infrastructure and assisting with emergency, corrective, and preventative maintenance for building utilities, Daidly check sheets cGMP manufacturing. independently performs a variety of skilled preventive general maintenance activities, repairs, construction, and renovation work on facilities. maintain all building systems and equipment to include but not limited to, HVAC PM, vacuum, RO/DI, chilled water, autoclaves, boilers, systems and equipment to include but not limited to, electrical equipment, Nitrogen Liquid and Carbon Dioxide, frighter exinspections of fire extinguishers check,maintaining maintaining cleanliness of the plant and equipment,Taking care of office lighting, performing preventative maintenance (PM) PLC Program.

. Perform electrical, mechanical, and pneumatic troubleshooting on automated manufacturing equipment resulting

in effective and high quality, preventative maintenance on various equipment including complex custom assembly automation systems additional duties as assigned. Maintenance sterilization and decontamination of the work area daily.

. Report and improve maintenance procedures and training May prepare reports and maintain the database and metrics on preventive maintenance and machine breakdowns of all responsible equipment.supplies Manages the incoming/outgoing supplies and the transport of parts and equipment.

. Ensure required manufacturing and laboratory equipment up time through scheduled equipment maintenance & repair. when required, for the operations, maintenance, and repair of facility support systems in a safe and expeditious manner. Facility utilities are 100% operational and maintained to support clean rooms, laboratories, special purpose areas, and critical equipment needs. Monitor and process waste materials

. Implement and manage plan execution for calibration and maintenance, laboratory equipment, Building Management System, utilities, including compressed gases, liquid nitrogen, temperature controls.

. Provide support and assistance to manage external supplier relationships for utilities maintenance partners and site support services including landlord tenant issues.

. Ability to troubleshoot basic electrical, mechanical, and plumbing systems. Ability to articulate information to coworkers and vendors Able and willing to follow all legal and company safety regulations Able to work independently or Team player.

. completeness of maintenance information entered in the Excel, Microsoft maintenance minor in shop repairs of in shop repairs of tooling, cell equipment, and components-develop and maintain the 5S of the maintenance areas-travel between various Cue facilities for clerical duties may dispatch.

. Have reliable vehicle and valid driver’s license to support multiple facilities, Able to work weekends or other shifts on physical occasions.. standing or sitting for prolonged period of time Adjusting, moving or lifting objects up to 50 pounds Repeating motions that may include the wrists, hands and/or fingers Operating machinery always use power tools. General Atomics Feb 2020- Aug 2021

Cirris Test / Cable Assembler

. Sets up and conducts semi-routine electronic testing (bench, environmental, and electron mechanical testing) records, interprets and summarizes data and provides reports to Supervisor or Manager.

. Tests troubleshooting techniques following established quality processes, standards, and safety regulations. be able to troubleshoot and find root case of the failure in order to process and correct the failure. Good time management skills with the ability to work independently as well as a team contributor.

. When building cable harness assemblies you will need to perform a variety of tasks that include component verification, wire stripping, crimping, containerization per wiring diagrams, harness layout/lacing, shield termination, heat shrink, and label application. Additional operations you need to complete are soldering, splicing, breakouts, wiring, and monitor quality in accordance with control procedures. building complex cable harness assemblies that will require you to following drawing specifications, elaborate written work instructions, harness assemblies that will require you to following drawing specifications, elaborate written work instructions, and B.O.Ms to label and build assemblies.

Solar Turbines

Electrical Mechanical Assembler 2 Jul 2019- Feb 2020

. Layout, fabricate parts, and build electrical / electronic wiring components. Perform complete operations to fabricate, assemble and install production and / or first article units, such as control junction consolidates, instrument panels, relay panels and battery racks in a manner that aligns with standards for safety, quality, velocity, and cost. Performs inspection of materials parts, assemblies and process inspection when required.

. May perform work operations under direct guidance where adequate information has not yet been determined and furnished. Select, brand, cut, route, fasten, sleeve, tie and lug wires; assemble and install wiring harnesses; locate, drill, mount, and fasten components, install in proper sequence in control consoles, junction boxes, instrument/relay panels, resistors, capacitors, filters, diodes, circuit boards, heat and speed sensors, transformers, meters, malfunction status indicators, circuit breakers, and fuses. Perform rework of the nature and level of difficulty described herein. initiative and be self-motivated to learn new software, processes and skills with positive energy within a small, always team player. Northrop Grumman

Mechanical Assembler 2 / Pear Inspection 2018 – 2019

. Perform mechanical and Electrical assembly such as cables, harnesses, chassis, and printed circuits boards. performs inspections of materials, parts assemblies and processes inspection when required.

. Set up conducts testing cable and established quality processes standards and safety regulation.

. Perform sub-assemblies such as modules, boards, panels, drawers, frames, cables, and point to point wiring.

. Disassemble, modify, rework, reassemble assemblies and sub-assemblies according to specifications and drawings.

and drawings.

. Determine and follow methods sequences of operation in performing assembly such as wiring, component installation, hand soldering and cable harnessing on assembly units. Meggitt Aircraft Systems

Manufacturing Technician Aug 2018 – Dec 2018

. Performs a range of complex routine mechanical and electronic mechanical assembly of small parts and/or accordance in accordance with company processes and procedures. Use hand small power tools, and various measuring and testing devices in performing job duties.

. Conducts inspections of own or other associates work to ensure accuracy in accordance with company and/or customer drawing Adjusts and calibrates systems as needed.

. Uses shop traveler, Excel and SAP Program route card, or uncomplicated schematic drawings to confirm correct sequence of operation. Set up conduct testing product and multi-meter established quality processes standards.

. Applies process specifications governing production of product within an assigned cell

. Maintains work area under company guidelines and participates in company events and/or projects as required, Performs electronic work order movement in ERP system Records production time and quantity data at the cell Other responsibilities as assigned. Diversified Nano Solutions Corporation

Manufacturing Technician / Lab Technician 2017-2018

. Work closely with R&D Manager and Scientist in order to provide technical support for new and products. Follow standard protocols for manufacturing and characterizing ink products. Use of technical equipment for mechanical mixing, materiel property evaluation (Viscometer, Tension meter, PH meter, etc.) and bottling (filling machines) of ink products, If need adjustment have PH meter, etc.) and bottling (filling machines) of ink products, If need adjustment have to perform adjustment.

. Responsible for filling orders with high level quality assurance, Assemble and document testing and issues with existing and new products. Follow production procedures, record process issues with existing and new products. Follow production procedures, record process operations and data record process operations and data entries on batch records, carefully review all documentation, and check all calculations (e.g. batch records, labels, equipment readings) submitted all daily logs and reports.

Pacira Pharmaceuticals Inc,

Manufacturing Technician II 2012-2016

. Responsible for following SOPs, performing daily tasks in a clean room/cGMP environment per current QSRs. May also be responsible for troubleshooting manufacturing product challenges. Aseptic technique, clean room gowning and extensive knowledge of Good Manufacturing Practices (GMPs), with emphasis on Biologic. Follows established company rules, regulations and safety precautions, and maintains quality standards

. Perform Pres-Cip, Cip1, Cip2, Sip and verify commercial Bulk operations in a cGMP regulated environment to produce Exparel. Prepare reagents following standard operating procedures

(SOPs) in accordance with current good manufacturing practices (cGMPs)

. Operate HMI to manually fill and drain production vessels to perform rinse water sampling. Used HMI to safety vent and depressurize vessels used in manufacturing. Conduct pressure hold test of skid prior to Bulk and depressurized vessels used in manufacturing. Conduct pressure hold to Bulk manufacturing and at the conclusion of Bulk activities. Also, perform integrity test of cross flow. Filtration System before commencing Bulk activities and laboratory protocols regulatory and safety requirements.

. Dispense raw materials including active Pharmaceutical ingredient and recipients used for production slurry and buffers needed for successful production of the final drug while. Produced adjustment solution and cleaning agents using basic calculations and formulas.

. Perform other related duties as assigned, collaborate in team meeting and activities, including set team support as appropriate, and perform other related duties as assigned, Understands quality specific. Always performs inspect and double check work is done or if need somebody specific. Always performs inspect and double check work is done or if need somebody to verify Review manufacturing documentation real time to ensure compliance. Ability to be flexible in adapting work plans to current corporate goals.

Contact this candidate