Electronics Technician with Naval IT Leadership Expertise

Electronics Maintenance Technician III – Hardware & Software Installation Expert. Accomplished military veteran with a consistent record of superior achievement and outstanding performance. Adaptive technological expertise, plus the leadership and communication ability to resolve problems and achieve objectives in any circumstances. Distinguished record of working safely and delivering top quality installations for numerous US Government installations. Top Secret/Sensitive Compartment Information (TS/SCI Eligible).

Professional Expertise:

Fiber Termini Certification (Exp 8/15/21), Multi-pin Certification, Multi-pin Quality Control Inspector (QCI) Certification. Deck plate Leadership with over 20+ subordinates to ensure installation of US Naval Ship mods and Upgrades. OSHA 10 Maritime Certification issued February 2019, Confined Space Entrant/Attendant Certified (Exp. 10/13/19), Fire watch Stander Certified (Exp. 10/13/19). Assisted technical supervisor in charge of maintaining over 3000 high priority voice/data naval circuits for the East Coast Naval Fleet. Produced and successfully executed a department watch bill rotation to maintain productivity and system operations while afloat and on land. I assisted with various hardware / software upgrades and implementations. Completed A+ certification while active-duty Navy, Transmission Systems Technician, and Satellite Communications Technician, as well. I was responsible for training and supervising over 35+ subordinates in computer systems setup and operations. I am experienced with Active Directory, vulnerability assessment tools and other components found in large network environments. I managed the monitoring and troubleshooting of over 800 Video Teleconferences and maintained a 100% quality & connectivity rating.

Work History:

General Dynamics Information Technology (GDIT) Engineering Technician III February 2020 - Present 4 years 10 months Seattle Washington and San Diego California

While working as an Engineering Technician III, I perform installs as both Combat Systems lead and now as acting Project Manager for CG-71. As of Jan 2024 I have been in San Diego California onboard DDG’s 90 & 93 as a Combat Systems Install Lead. I maintain, repair, overhaul, troubleshoot, modify, construct and test various types of electrical, electronic, and/or mechanical equipment and related devices. I apply technical knowledge of electronics principles to put equipment in operational condition and solve moderately complex problems by troubleshooting and repairing malfunctions using specialized test and diagnostic equipment. Ican modify circuitry to improve performance when needed. I make recommendations for improvements or modifications to correct problems and provide operational maintenance instruction to customers and other personnel as needed while performing preventative maintenance. I have been assigned to the cableway Deck plate Lead, responsible for cableway inspection, rip-out/installation of cable for various ship alts. I am responsible for Mct/Mct closures and space closeouts. I assist with managing the day-to-day operations and the implementation of schematics and drawings for 14 ship alts for Aegis Modernization & Upgrades. I Rely on my experience and judgment to plan and accomplish goals. I lead and direct the work of others. I prepared operating and malfunction reports and related documentation. I have Fiber Termini/Fiber Cable handling Certification: Highly experienced in handling and building multimode and single mode fiber connections. Certified: KITCO (exp 08/15/2021). Managed the handling of various cable types to include Heliax cabling, both non-watertight/watertight CAT-5, power, coaxial cabling, & various high data rate cabling. Fluent in the reading & interpretation of NAVSEA wiring diagrams and drawings for installations to ensure cabling is accurately configured within desired specifications. - Lead for SSEE INC F/ICOP installation: Lead teams for numerous avails to ensure cabling were properly installed to each unit including proper termination of connectors. - CANES installation: Including KW-46 and ORTS Mods; Rip-Out/Removal lead for multiple CANES installations. - Combat Systems: Involved installing controller systems for Naval Gun Weapons systems; 5”54 & CIWS. NMT: Satcom communications antenna & radomes onboard USN Combatants. I have worked on1MC/IVCS(Phone system installation). Hardware/Software installations and upgrades. Multi-Pin Certification/QCI Certification for Multi-pin connectors: prefabrication projects for the US Navy that include the building of Multipin connectors, installation of 2x4 boxes for Digital Phones, CT Phone. - Multi-Cable Transit Specialist: Skilled in the repair and testing of countless transit systems for US Naval customer. I have also performed MMSP Installation onboard DDG-90.

May 2019 – Present - East Coast Repair & Fabrication Electrician 1st Class (Contractor) May port, Florida 9 months

As an Electrician 1St Class, I preform installs, maintain, repair, overhaul, troubleshoot, modify, construct and test various types of electrical, electronic, and/or mechanical equipment and related devices. I apply technical knowledge of electronics principles to put equipment in operational condition and solve moderately complex problems by troubleshooting and repairing malfunctions using specialized test and diagnostic equipment. I can modify circuitry to improve performance when needed. I make recommendations for improvements or modifications to correct problems and provide operational maintenance instruction to customers and other personnel as needed while performing preventative maintenance. I am extremely experienced repairing and or preforming maintenance of controllers, breakers, and I can provide temporary services for all trades to include 440v/220v/Air, and utilization of Viking Plug and Cowshed with use of pier riser (480v). I can troubleshoot circuit connectivity and intermittent signal flow. I preform the installation, connectorization, and repair of various terminations in electrical circuits, and installation of 440v/220 plug connectors on 6 to 8 AWG cabling. Use of Fluke voltmeters and Megering of cabling. Read Drawings and Schematics and perform scope of work. Execute Berthing modifications and Sea Mavs in accordance with drawings.

Dec 2013 – Mar 2019- SERCO (Engineering Technician III) May port, Florida 5 years 3 months

As an Electrician Technician III, I managed a team of installers who are responsible for preforming installs, maintain, repair, overhaul, troubleshoot, modify, construct and test various types of electrical, electronic, and/or mechanical equipment and related devices. I apply technical knowledge of electronics principles to put equipment in operational condition and solve moderately complex problems by troubleshooting and repairing malfunctions using specialized test and diagnostic equipment. I can modify circuitry to improve performance when needed. I make recommendations for improvements or modifications to correct problems and provide operational maintenance instruction to customers and other personnel as needed while performing preventative maintenance. I have experience installing, servicing, and repairing structures and major components. Responsible for scheduling and overseeing the installation of products. Ensures adherence to contract specifications and established policies and procedures. Familiar with a variety of the field’s concepts, practices, and procedures. I Rely on my experience and judgment to plan and accomplish goals. I lead and direct the work of others. I prepared operating and malfunction reports and related documentation. I have Fiber Termini/Fiber Cable handling Certification: Highly experienced in handling and building multimode and single mode fiber connections. Certified: KITCO (exp 08/15/2021). Managed the handling of various cable types to include Heliax cabling, both non-watertight/watertight CAT-5, power, coaxial cabling, & various high data rate cabling. Fluent in the reading & interpretation of NAVSEA wiring diagrams and drawings for installations to ensure cabling is accurately configured within desired specifications. - Lead for SSEE INC F/ICOP installation: Lead teams for numerous avails to ensure cabling were properly installed to each unit including proper termination of connectors. - CANES installation: Including KW-46 and ORTS Mods; Rip-Out/Removal lead for multiple CANES installations. - Combat Systems: Involved installing controller systems for Naval Gun Weapons systems; 5”54 & CIWS. NMT: Satcom communications antenna & radomes onboard USN Combatants. I have worked on IVCS (Phone system installation). Hardware/Software installations and upgrades. Multi-Pin Certification/QCI Certification for Multi-pin connectors: prefabrication projects for the US Navy that include the building of Multipin connectors, installation of 2x4 boxes for Digital Phones, CT Phone. - Multi-Cable Transit Specialist: Skilled in the repair and testing of countless transit systems for US Naval customer.

Mar 2008 – Dec 2015 - J&R Affordable Computer Solutions Chesapeake, Virginia

Computer Repair technician - Owner/operator responsible for the repair and safeguard of all clientele’s information whether commercial or residential. Performing repairs on both desktop & laptop PCs by Identifying and troubleshooting problems and maintaining hardware and software and resolving network and connectivity issues. I am experienced in the repairing motherboards and upgrading firmware and installing software applications and CRM programs. I also am a custom builder of PCs (to customer’s specifications) and aid with the issues of password retrieval, data recovery, software/hardware upgrades.

Apr 1994 – Nov 2005 – US Navy (USS Kearsarge LHD-3) Norfolk, Virginia

Information Technician 2nd Class - Served on active duty and completed a 12 year naval career. Served my country in various Mediterranean cruises, as well as different humanitarian efforts in the Gulf and the Middle East. Also serviced GMF (Ground Mobile Force) & IMSOC vans for ground communications.

Achieved my Surface Warfare qualification and Top Secret SCI Eligible clearance before leaving active duty.

Education/Certification

Avon Park High School, Graduated 1991

PRESENT: Coursework towards Associates of Science Degree in Electronics Engineering and

Technology from ECPI Technology University in Virginia Beach, Va. - University of Phoenix Online for

Cisco Networking & Administration. - DeVry Online University for AS for Information Security.

US NAVY: Satellite communications C School US Navy for ground communications - Naval Leadership

- Transmission Systems Technician C School.

PROFILE

Over 20+ years of in-depth experience in all facets of computer repairs, upgrades, software/hardware installations, POS install/upgrade assist, Experienced with video and telecommunications management and operations both ashore and afloat, such as DAMA, OTIXCS, TADIXS, SATHICOM, IT-21, ST-1000, ADNS, Remedy, and also NMCI. Advanced skills in VTC’s (Video Teleconferences), network security, troubleshooting (Black/Red side Bert Test), network administration, fault isolation on IP networks, and Cisco routers and switches. Additional experience also includes Over 12+ year’s customer service experience in solving all concerns and issues, both technical and administrative. COMSEC & OPSEC > Technical Documentation Training & Development > Video Teleconference Mobile Communications > Security Control Instruction & Directives > Risk & Vulnerability Assessments Security Testing & Evaluation

CORE COMPETENCIES/TECHNICAL CERTIFICATIONS & SKILLS

SOFTWARE:

Windows 10, 7, 8, XP, ME, Vista, DOS > Active Directory, Microsoft Office (Word, Excel, PowerPoint, > Norton Anti-Virus, Publisher, Outlook, Access) > WinZip/WinRAR Java > Roxio Creator, all forms Adobe Products (flash player, Shockwave Player, Adobe Air, Adobe Reader, Acrobat) UNIX Windows NT and Workstation

ADMINISTRATION:

Instructions-Directives Correspondences, Serialization Memorandums, Maintaining File System and databases, Security Evaluation

HARDWARE:

STU-III/STE, > Handheld Devices Palm Pilots, CYZ-10, KG-84 A/C > laptops Lan/Wan systems, KW-46 > Modems, KG-194 and KG-175 > Network configurations & Interfaces (NIC cards), CD/DVD writers > PC Hardware configuration, Peripheral hookup, Dell Computers > Printers (All-in-one/Multifunctional), Printer Switches, Ethernet Devices > Routers

NETWORKING:

Local Area Networks (LAN) & Wide Area Networks (WAN), Wireless Networks, Intranet, TCP/IP, Lan & Network Administration, Network Architecture & Interface, Network Security (Passwords & Global Email Address), Staff Training & Documentation, Siprnet, Siprnet

IT Management:

Data & Information Systems, Telecommunications Systems, Training Direction, Voice and Data Communications, Wireless Networks, Help Desk & Security Access, Troubleshooting End User Support, Email, Customer Services,

General Labor & Warehouse Skills:

Pest Control (general, debris removal, > Receiving & Shipping wood work, Joyce repair) Painter > Load/Unload Trucks, Demolition > Hand Jack/Truck Operator, Mover > Order Selector, Nail gun (pneumatic & standard), Drill, Ram shot, Tile setter, Machine operator, Quality Control & Small Parts Assembler

PROFESSIONAL REFFERENCES

Cyndi Spell 904-***-****

(SERCO Program Director, C5ISR)

11425 Saints Road

Jacksonville, Fla. 32246

Stanley, Faulds (Jake) 904-***-****

(SERCO Project Manager C5ISR)

11425 Saints Road

Jacksonville, Fla. 32246

Williams Robinson 805-***-****

(Combat Systems Project Eng. NAVSEA)

AEGIS Modernization Team

1084 Pocahontas St

Norfolk, Va. 23511-2726

Carroll Hicks (B.A.E. SYSTEMS) 240-***-****

23535 Cottonwood Parkway

California, MD 206019

Jeff Lewis (SPAWAR) (904) 270–3391

(C4ISR On-site Installation Coordinator)

Naval Station Mayport Bldg. 1380

Mayport, Fla. 32228-0087

Jerome Mayor 757-***-****

(Project Manager In-video Solutions)

******.*****@****************.***

Contact this candidate