Electrical Apprentice

Luis Trejo

La Junta Rd Sw

Albuquerque, NM *****

Phone: 985-***-****

Email: ***************@*****.***

NCCER #28608307 Industrial Electrician Certification TDLR apprentice electrician 702160

TWIC card current to 2028

ISTC ID# 190******* current

Drivers license 517337366 current to 2028

Objective

Highly motivated construction worker with industrial and commercial experience, knowledge of most of the hand tools and power tools related to the metal and piping installation. Always placing safety, productivity and quality as top priorities for successful projects. Ability Summary

Effective listening skills, verbal and written communication skills and good interpersonal skills. Ability to multitask prioritizing tasks and job assignments to balance clients needs with company goals.

Employment History

4/2025 - 11/2025. Electrician Apprentice at ISC CONSTRUCTORS. Westlake Brine, Starks, LA. GPX Plant, Starks, LA.Chevron Phillips Chemical Project GTP at Orange, Texas.

Assisting Journeymen to fabricate and install rigid, aluminum, E.M.T., plasti-bond and P.V.C. conduit. Able to use mechanical by hand and 2” – 4” hydraulic benders. Able to fabricate and install conduit supports, ability to install, pull and push wire and cable by hand in cable trays or snap trays. Helping in the installation of cable tray systems, can read blueprints and national electric code requirements. Knowledgeable in communication and applicable electrical OSHA rules and regulations. Safe operation of boom lifts and scissor lifts. Drilling into concrete for cable tray supports and grounding systems. Assistance in the installing, termination and pull point boxes. Installed and assembled underground conduits and electrical duct banks according to project plans and specifications. Collaborated with crews to lay out dimensions and reference lines for accurate installation. Assembled duct components and ensured secure seams and joints. Help Installed and serviced wiring, control, and lighting systems within the duct banks. Proficient use of industrial hand and power tools Drilling and tapping holes in order to install grounding fittings. Pulling or pushing wiring through openings, using hand and power tools, carrying materials, assisting on the cable tray and metal supports installing, cleaning tools, and preparing work areas. Measuring, cutting, bending, treating conduit pipes. Keeping the work area clean and organized as we go. Working at heights as 300 ft. using the adequate fall protection, tie off 100% at all times, able to work at scaffold structures and manlift. Working at all times with the safety regulations and ensuring production and quality goals are met every day. Able to recognize and avoid safety hazards and dangers. Able to meet all physical requirements.

9/2024 - 4/2025. Industrial Insulation installer at ISC Industrial Specialty Crafts Port Arthur, Texas. (Plants: Exxon Mobil Beaumont, Texas and Motiva Port Arthur, Texas).

Install various types of insulation materials (mostly pyrogel insulation ) on pipes, tanks, vessels, duct work, and other industrial equipment. Accurately measure and cut insulation materials to fit specific shapes and sizes. Fasten insulation in place using wire, tape, screws, or other appropriate methods. Interpret blueprints and specifications to ensure proper insulation installation.

9/2023 - 8/2024 Ironworker Sheet Metal Installer (R- panels, walls and roofs) at CSM Products and Solutions, Houston, Texas. (Plants: Shaw Group Lake Charles,Louisiana./ Chevron REG, Geismar Louisiana./ Shintech, Plaquemine, Louisiana.)

Responsible for fabricating, assembling, and installing sheet metal products, such as ventilation systems, windows, walls, roofs, and metal structures. Working at heights as 300 ft. Using hand tools and power tools as pliers, snips, needle nose, drills, and impact guns, rope and pulley, fall protection, manlift, swing stage. Working at all times with the safety regulations and ensuring production and quality goals are met every day.

02/2023 - 08/2023 Pipe fitter Top helper at Zachry Group, (GPX Plant LNG Golden Pass, Texas. )

Select type of pipe, line code number, size and kind of material according to the specs shown on the isometrics. Daily basis plan and inspection sequence on pipe and metal supports installation to avoid obstructions and activities of the other trades. Bolt up flanges making sure the high/low is within the tolerance, the flange faces are parallel, the flange gap is even and uniform and within specification, ensuring nuts and bolts are lubricated, tightened to the correct torque. Select and help assemble pipe, flanges, valves, pipe supports, hangers and gauges to install pipe systems. Working at all times with adherence to safety regulations, working and talking to other trades to agree and not be in the same work place and thus avoid accidents.

10/2022 - 01/2023 Shipfitter Westport Shipyards, Orange, Texas. Removing with torch cutting process the damaged plate inserts and replacing with new plate inserts. Removing angle bar and old metal brackets to replace for new ones. Removing old barge equipment such as pumps, generators, diesel engines, and other equipment for maintenance, refurbish and later re-installation. Cutting old metal plates, torch washing metal, re-configuring the design of the barge adding new stuff or replacing for different stuff. 10/2020 - 09/2022 Roofer and Interpreter English/Spanish Extra Squares Roofing, Richardson, Texas.

Doing tear off at the customers roof. Flat-commercial roofs as large as hospitals or commercial buildings as Walmart stores. Clean up and start installing the new insulation, dens deck and TPO, talking and translating to the manager or maintenance guys about solving troubles on the roof and working together on a plan to tear off the next roof section. 08/2020 - 09/2020 Electrician Apprentice at Generator Supercenter Houston, Tomball, Texas.

Working as a construction labor helping electricians to move and install generators in the backyard of the customers homes, getting ready the wire, pvc connectors, and trenching to bury the new conduit in the backyard.

Education History

Industrial Engineer Mexico. ITCM, MADERO, Tamaulipas. MEXICO 06/1994 Stick Welding Cecati Trade School.

ABC SETX Instrument Tech current student.

Familiar with assembling/disassembling fisher control valves at the shop, mechanically inclined, parallel and series circuits knowledge, able to safely install and remove gate valves, relief valves, butterfly valves, and other type of valves, familiar with electrical contactors, level, flow and temperature transmitters, able to read pressure gauges and multimeter devices, able to safely use and operate most of the hand and power tools, able to observe and comply with all safety rules. familiar with the industrial environment).

Tools and equipment I have knowledge of.

Hand tools: pipe wrenches, combination wrench, screwdrivers, sockets, wrap around, tape measure and most of the hand tools. Power tools: drill, grinder, metabo cutter, end grinder, band saw, skill saw and most of the power tools. Other tools: Torch cutter, Stick welding

(solder tacker). Machinery: Manlift (Expert level), Scissor lift (Expert level), Mini excavator(medium level), Warehouse forklift (Expert level), Skytrak forklift (medium level), Bobcat (medium level), Truck and trailer (Expert level). Work References

ISC Constructors

Shawn Tagert 281-***-****

Victor Hernandez 985-***-****

Industrial Specialty Crafts Insulation Job

Ramon Hernandez 409-***-****

CSM Products and Solutions

Andrew 346-***-****

Contact this candidate