Quality Inspector Light Industrial
Resume:
Latrena Delgado
Light industrial/manufacturing
Saluda, SC 29138
*******.*******@*****.***
Light Industrial Position
Ability Summary
10+ yrs Operator / Inspector Experience
Quality Practices and Measurements-
Lean Six Sigma Yellow Belt
Manufacturing Production and Processes
Maintenance Awareness
Snap-On Electrical and Hand Tool Safety
Quality Inspector Experience
Follow Safety Guidelines
Forklift Safety Certification
Strong Team Member
Workcore Certification
Follow Good Manufacturing Practices
Workkeys- Silver
HAZMAT Training and Certification
Authorized to work in the US for any employer
Work Experience
Electrical and Instrumentation Controls Technician SC Pet Solutions - Ward, SC
March 2023 to Present
Maintain and troubleshoot electrical and electronic instruments that are used in the control process. Install VFD’s in the Motor Control Center when needed. Also, program VFD’s and DOL’s in the Motor Control Center. Maintain and troubleshoot PLC panels, 24V. Wire and troubleshoot three phase motors that are used in 480V systems. Maintain the electrical parts in the process facility, such as lighting fixtures, switches and GFCI’s. Do whatever is needed in the electrical side of the process. Always maintain a safe and clean environment.
Assembly
Mercedes-Benz Vans, LLC - Ladson, SC
January 2019 to November 2020
Assemble parts of the vans. Do what is asked of me. Inspect for quality/issues. If issues, make repairs or call someone to make the repairs. Maintain a safe, enthusiastic, positive and optimistic attitude. Also, maintain a safe and clean work environment.
Shipping Technician
Trace Staffing@ High Purity Standards - North Charleston, SC September 2018 to November 2018
Pack and ship chemicals nation wide and international. Read packing slips and bottles to make sure that all the information is correct: chemical, date, size, quantity and make sure it's correct on the certificate of analysis and safety data sheets. Pack it and make sure I put the correct labels on the box that match what type of chemical inside the package. Whether it's going by land or air. Maintain a clean and safe environment.
Machine Operator/Technician
Onin Staffing@East Coast Bedding - North Charleston, SC August 2018 to September 2018
Machine operator on a ying yang machine/line. I fill my lines up with raw materials that is feed into hoppers to combine to make filling/stuffing for pillows. Incase of malfunction of the machine/line, as an operator, I have to diagnose and fix the problem, but if can't, I have to tell supervisor and contact maintenance for help. As a machine operator, its my line, so whomever is working on my line has to listen to me as a lead. My line consist of two sewers, two people fluffing, two packers, a pillow roller and a stuffer. Maintain a safe a clean work environment. Visual Quality Inspector
Hammes staffing@ IFA - North Charleston, SC
August 2018 to August 2018
Quality Inspector- Visually inspect and manually clean rust from pipes that are used to make drive shafts in vehicles. Maintain a safe and clean environment. Draw Jet Operator
Geodis@Ascend Performance Materials - Greenwood, SC April 2018 to June 2018
Draw jet Operator- go get buggies of raw yarn to creel into the machine that has 20 positions, consists of top and bottom creel. Then machine doffs every 39-42 minutes. String up machine incase you lose an end. Doff machine twice before taking full buggy to inspection area, front and back. Label before taking it to inspection. Repeat. Maintain a safe and clean work environment. Assembly
Greer Group @Eaton Electrical - Greenwood, SC
February 2018 to April 2018
Cut and prep wires for low-voltage panels. Read blueprints to wire low-voltage panels. Maintain a safe and clean work environment.
Assembly
Magna Drive Automotive - Piedmont, SC
November 2017 to January 2018
I work in PACCAR/assembly, the door line. Make doors for PACCAR. Use power tools to insert rivets and screws used to put the door together. Also, use sealants that help keep parts and the door together with the screws and rivets. After putting certain materials together to make the door, place the made part onto the machine and the robot does the rest. The line makes a door in three minutes, start to finish. Maintain a safe and clean work environment.
Dock Controller/Inventory Control
DSV/Key Logistics Solutions - Laurens, SC
June 2017 to October 2017
Put the correct labels on the correct tire by checking sidewalls and MSPN numbers on the labels. Make sure the labels match up with the sidewall of the tire. These tires could be coming off a truck or could be going on a truck to be shipped, we label as we go. Sometimes go to locations in the warehouse to label tires that may not be labeled. If labels are not there, we have to pull up the correct label and print out what is needed for that location or the trucks, etc. Also, replenishments. By using forklifts, move pallets of work, to keep the product full for the pickers. Also, in the event of a spill, be ready to help and assist the rovers in the building to clean it up. At the end of shift, do paperwork by counting how many tires we labeled and how many pallets we moved in the FSA. While doing so, maintain a safe and clean environment.
Machine Operator/UV Coloring
Prysmian Cable & Systems USA - Lexington, SC
March 2015 to December 2016
Thread up fiber optic filled bobbins to be colored to be used to make fiber optic cables. After fiber is colored, put the valuable information in the system so that it can be located and used to make cables. Also, at the end of each month do inventory by counting all materials, from raw materials to finished cable reels. Maintain a safe and clean work environment. Education
Associate of Applied Science in Mechatronics Technology Piedmont Technical College - Greenwood, SC
February 2021 to May 2023
Associate of Applied Science in Introduction to Automation-Certificate Piedmont Technical College - Greenwood, SC
February 2021 to December 2022
Associate’s of Applied Science in Electrical Maintenance Technician-Certificate Piedmont Technical College - Greenwood, SC
February 2021 to December 2022
Associate of Engineering Technician in The Manufacturing Skill Standards Council Certified Production Technician
Piedmont Technical College - Greenwood, SC
February 2021 to May 2021
Associate of Applied Science in Mechatronics Technology I- Certificate Piedmont Technical College - Greenwood, SC
February 2021 to May 2021
Associate of Engineering Technician in Manufacturing Production Technician- Quick Skills Certificate
Piedmont Technical College - Greenwood, SC
February 2021 to May 2021
Associate of Engineering Technician in OSHA-10 hour General Industry, Stop the Bleed, Fire Extinguisher Safety
Piedmont Technical College - Greenwood, SC
February 2021 to February 2021
Industrial/Manufacturing in Manufacturing Assembly Technician- Certificate Piedmont Technical College - Greenwood, SC
January 2014 to February 2014
High School Diploma
Saluda High School - Saluda, SC
Skills
• Shipping Receiving
• Forklift
• Warehouse Associate
• Shipping
• Assembly Worker
• Assembly Line
• Lean Manufacturing
• Microsoft Excel
• Basic Math
• English
• Microsoft Word
• Customer Service
• Blueprint Reading
• Masonry
• Quality Inspection
• Automotive Repair
• Quality Assurance
• 5S
• Manufacturing
• Mechanical Knowledge
• Time management
• Six Sigma
• Lean
• Electrical Experience
• Clerical experience
• Microsoft Outlook
• Typing
• Logistics
• Computer skills
• Power tools
• Programmable logic controllers
• Micrometer
• Driving
• Assembly
Certifications and Licenses
ICAO/IATA Certification
October 2018 to October 2020
Transportation of Dangerous Goods by International Air Transport Association. U. S. DOT Certification
October 2018 to October 2021
Transportation of Hazardous Materials
Forklift Certification
Assessments
Attention to detail — Proficient
September 2021
Identifying differences in materials, following instructions, and detecting details among distracting information
Full results: Proficient
Work style: Reliability — Proficient
August 2021
Tendency to be reliable, dependable, and act with integrity at work Full results: Proficient
Mechanical knowledge — Proficient
September 2021
Understanding and applying mechanical concepts and processes Full results: Proficient
Forklift safety — Proficient
July 2020
Best practices and safety hazards in forklift operation Full results: Proficient
Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.
Contact this candidate