Project Engineer Technical Support

BERNARD JORDAN

P.O. Box ******

Houston, Texas **269

Cell: 713-***-****

E-Mail: *.*********@*****.***

PROFESSIONAL EXPERIENCE

PIPELINE ENGINEER

UPI CORPORATION - HOUSTON, TEXAS

September 2023 – May 2025

Pipeline Engineer duties included pipeline wall thickness calculation, buoyancy, HCA, road and railroad calculation, design crossing, PI List, material list, pipeline route section support, permit, alignment sheet, hydrostatics calculation, HDD and Bore review and technical support, CFR 192 (Gas) and CFR 195 (Pipeline and Hazardous Materials), ASME B31.8 (Gas), ASME B31.4 (Liquid), ASME B31.12 (Hydrogen Piping and Pipelines), Pressure Testing of MAOP and MOP validation, CO2 Pipeline Projects.

Pipeline Stress Analysis, Geotechnical Report, pipeline hydraulic analysis, pipe diameter section, cathodic protection design, pipeline analysis, Technical Pipeline Toolbox, KMZ, Rextag, coordinate and communicate project deliverables, TWIC Card and OSHA 10 Certified.

GENERAL ENGINEER

U.S. DEPARTMENT OF ENERGY – SAVANNAH RIVER SITE NUCLEAR FACILITY - AIKEN, SC - February 2021 – December 2022

General Engineer (Program Manager) duties for Nuclear Material Management included the (DB) Down Blend Procedure, CCO Pad Containers and field site work in the K-Area Facility. Solid Waste Material Facility oversight included the (LLW) Low Level Waste, (MW) Mixed Waste, (TRU Waste) Transuranic Waste, Naval Waste, and field site work in E-area Facility. Overseeing and evaluate engineering program projects, procurement, cost estimate, AAP Report (Annual Report), Contractor Feedback meeting, governmental business meeting, IPABS program monthly budget reports, surveillance, maintenance, Nuclear Material Storage, and governmental presentations. Certified in Radwork I and Solid Waste Materials.

PROJECT ENGINEER

RECON CONSTRUCTION SERVICES - HOUSTON, TEXAS

February 2020 – April 2020

Project Engineer duties of Cutoff Wall, Test Panel Construction Plan and Mix Design as tracking reagent deliveries, prepare, collect, input batching logs from operators on plants, daily reports, QC documentation, record books, ensure calibration of equipment, document bleed water at trench, admixture dosage control checks, collect control cylinders daily, collect trench samples daily, maintain printed version of submittal in binder, maintain cylinder sample inventory, verification drilling, in-site permeability testing, maintain field book, cure box, index property spot checks for Bentonite plant, SCC Plant and SCCB Plant. Also, daily photo documentation and one call for utility locations.

PROJECT ENGINEER (LEAD) - (CONTRACT)

ENSITEUSA / SWDS ENGINEERS & DESIGNERS - HOUSTON, TEXAS

November 2018 – May 2019

Project Engineer (Lead) for Midstream Oil & Gas Systems in Texas and New Mexico.

Pipeline specifications, ASME B31.4 (Oil) & B31.8 (Gas), CFR 49:192 (Gas) & 195 (Hazardous Liquids or Oil) and DOT – Department of Transportation guideline.

Defines the scope and budget for the design for material for the pipeline system(s).

Design Basis, Procurement evaluations, RFQ – Request for Quotations and specifications for vendors, P&ID, MTO – Material Take Off, review and approves design deliverables, vendor material quotations, technical evaluations and recommendations.

Leads the commissioning of transmission pipelines and regulation facilities when required.

Scheduled project(s) preparation and development for the engineering group, review, quality control, lead conference meetings and provided technical guidance to engineers within the team.

Design oversight of pipeline systems for all aspects of technical support.

Stress Analysis Reports for Bore Design, HDD – Horizontal Directional Drill, Hydrotest Calculations, road crossing permits and pipeline specifications.

Calculation for corrosion allowance for pipeline design and KMZ routing of pipelines.

Develop and maintain documentation for assurance of compliance and integrity.

PROJECT ENGINEER - (CONTRACT)

POGD SOLUTIONS - HOUSTON, TEXAS

January 2016 – May 2018

Ensure industry codes and standards, specifications complied with the oil & gas projects.

Assist in review and quality control of the pipeline design.

Assist in the preparation and development of project procedures.

Developed preliminary estimates and scope to support Pipeline Engineering, Consultant for technical support, oil and gas design, stress analyses, HDD - Horizontal Directional Drill, Short HDD, bore design, stress analysis reports, permits.

Pipeline routing, layout (HDD & Bore Design) and DOT _ Department of Transportation guideline.

RFQ - Request for Quotation and comments on vendors documentations.

Pipeline specifications, design oversight of pipeline systems for all aspects of technical support and procurement evaluation.

Project development, review and approves design deliverables, vendor material quotations, technical evaluations, and recommendations.

PRINCIPAL ENGINEER

JACOBS ENGINEERING GROUP - HOUSTON, TEXAS

January 2014 – March 2015

Principal Engineering, project management, project construction, cost estimates, technical support, oil and gas design, stress analyses, HDD - Horizontal Directional Drill, Short HDD, bore design, stress analysis reports, permits.

Design oversight of pipeline systems for all aspects of technical support.

Equipment specification and application, bid summary sheets, manage, and delegate design.

QC drawings, P&ID, pipeline specifications, pipeline arrangements, LACT Unit, Prover, procurement, HAZOP Meeting, project data books and letters, field engineer, oversee and direct construction projects and DOT – Department of Transportation guideline.

Review and approves design deliverables, vendor material quotations, technical evaluations, and recommendations.

RFQ - Request for Quotation, RFP – Request for Proposal, Basis of Design, allocation of pipeline bends, bidders list, overseeing conference meeting, meeting minutes and sales.

Pipeline vacuum calculations, facility design, MAOP calculations, corrosion allowance calculations, conference calls and corresponding with internal and external clients

(ILI – Inline Inspection), Hydrotest calculations and traffic control design.

Provided technical guidance to engineers within the team.

Develop and maintain documentation for assurance of compliance and integrity.

Equipment sizing, valves, line sizing, safety analysis and project management. Engineering concepts for ASME & Section XI, CFR Regulations, Federal, State, County, City and railroad crossing design.

PROJECT ENGINEER / CAD MANAGER - (CONTRACT)

TRANSCANADA CORPORATION / EXP - ENERGY ENGINEERING - HOUSTON, TEXAS

August 2013 – January 2014

Project Engineer for the Keystone Project, Houston Lateral Project from Canada to Houston, Texas, project management, project construction, engineering concepts, design oversight of pipeline systems for all aspects of technical support, stress analyses and ASME & CFR - Code of Federal Regulations.

HDD - Horizontal Directional Drill & Bore design, pipeline design knowledge of oil & gas, conference calls and corresponding with internal and external clients, railroad crossing design.

Develop and maintain documentation for assurance of compliance and integrity.

Review and approves design deliverables, vendor material quotations, technical evaluations and recommendations and DOT – Department of Transportation guideline.

CAD Manager and delegating cad group workload in Texas and Florida, manage design team, review final QC, specifications, prepared and answer technical support questions for engineering and project specific, grading, paving, water system, traffic control design, alignment sheets, plan & profile, and AutoCAD Civil 3D.

PROJECT ENGINEER

SAM INC. ENGINEERING & SURVEY GROUP - HOUSTON, TEXAS

January 2012 – May 2013

Knowledge of engineering concepts, project management and construction, cost estimates, technical support, FERC, HDD & Bore design, pipeline materials, ASME & CFR, involved in production, precision pipeline design, railroad crossing design, corresponding with internal and external clients, permits, alignment sheets, AutoCAD Civil 3D, deeds, plats and topographic.

Design oversight of pipeline systems for all aspects of technical support.

Develop and maintain documentation for assurance of compliance and integrity.

Review and approves design deliverables, vendor material quotations, technical evaluations, and recommendations.

RESEARCH ENGINEER

TEXAS A & M UNIVERSITY NUCLEAR FACILITY- COLLEGE STATION

NASA - HOUSTON, TEXAS,

January 2010 – May 2011

Vacuum Chamber System for Radiation Research for Texas A&M Nuclear Facility & NASA.

Devised design of experiments for research as needed, conducted qualification testing of equipment in test lab accordance with industry guidelines, and provided material recommendations for research. Perform failure analysis, troubleshoot system, responsible for daily tasks.

Advise the engineering group on technical issues, safety, presentations, vendors, bids & purchases

Result analyzing, final reports, P&ID, bill of materials and AutoCAD.

PROJECT ENGINEER

PIPELINE ENGINEERING SOLUTION INC. - HOUSTON, TEXAS

May 2006 – May 2009

Project Engineer, project management, project construction, cost estimates, excellent communication and interpersonal skills, working knowledge with industry standards such as ASME, CFR, API, ASTM Codes, standards and practices, design project(s) compliance with Federal, State, County, City, U.S. Coast Guard, CFR, FERC, TNRCC and permit regulations, onshore & offshore piping design, railroad crossing design, RFP, RFQ, bidder list, procurement, knowledge of piping arrangements, in 2D & 3D diagrams, pipe sizing, bill of materials, equipment specification and application, bids & purchases analyses, oversee and direct construction projects, grading, paving, water and storm systems.

Design oversight of pipeline systems for all aspects of technical support.

Develop and maintain documentation for assurance of compliance and integrity.

Review and approves design deliverables, vendor material quotations, technical evaluations, recommendations, and DOT – Department of Transportation guideline.

Stress analysis reports, sales, technical correspondence, P&ID, HDD - Horizontal Directional Drill, pipeline integrity or inline inspection, field engineer and site inspection in Texas, Louisiana, Mississippi, Florida, corresponding with internal and external clients, vendors, problem solving, traffic control design, topographic, HYSIS and AutoCAD Civil 3D.

EDUCATION

Bachelor of Science: Electrical Engineering Technology

UNIVERSITY OF HOUSTON - HOUSTON, TEXAS

Master of Science: Mechanical Engineering

PRAIRIE VIEW A & M UNIVERSITY - PRAIRIE VIEW, TEXAS

REFERENCE

AVAILABLE UPON REQUEST

Contact this candidate