Structural Engineer Civil Engineering

RUBEN VERGHESE KADAKILETHU

974-******** ***************@*****.***

Professional Summary

With an intense passion for computational design, digitalization, and emerging technologies, as a structural engineer, since 2020, I have had the privilege of working on a broad spectrum of projects, cooperating with diverse teams across several countries. As a committed structural engineering graduate, I hope to advance my career through exploration and a variety of professional experiences. I aspire to obtain a chartered engineering license and work in the area of design alongside architects and other engineers to develop modern and innovative sustainable infrastructure for the future. With my expertise and diligence combined with the chance to work in this intellectually engaging atmosphere, I am optimistic that I will be an asset to your firm.

Skills

Design Software: CSI ETABS, CSI SAFE, STAAD Pro Connection Edition, Tekla Structural Designer, Tekla Tedds, Autodesk Robot Structural Analysis, Ides Statica, AutoCAD.

Surveying Equipment: Auto Level, Dumpy Level, and Total `Station

Steel and Concrete Design.

Programming: MATLAB, C and C++

Microsoft Office: Word, PowerPoint, Excel, Access, Project

Familiarized: with Civil Engineering Codes (BS EN, ACI, BS)

Professional Experience

September 2020 – Present Qatar Design Consortium – Doha, Qatar

Structural Engineer

Familiarized with Civil Engineering codes BS EN, ACI 318, BS.

Developed and tested models in STAAD Pro, ETABS and TEKLA TEDDS to assess feasibility, operating condition effects, possible new applications and necessity of modification.

Assisted in drafting drawings, reviewing and checking plans, and preparing excel sheets for calculations.

Visited and inspected damaged structure and issued Structural Assessment Report with Recommendations for repair work along with presentations and sketches.

Participated in project meeting with clients and management and provided inputs.

Created and submitted thorough design calculations and design documentation.

Monitored the implementation of design throughout the entire project lifecycle, from initial concepts to visits on site.

July 2018 – August 2018 Qatar Design Consortium – Doha, Qatar

Interim Trainee, Structural Division

Project: International Bank of Qatar

Technical Structural Assessment of Data Center Room was performed.

The design of structural elements was done using STAADPro software and TEDDS.

Establish the structural stability and adequacy by carrying out the analysis using internationally approved ACI- 318 M-14 building code

Collaborated successfully with cross-functional development teams to design and exclusively meet requirements provided by the clients and other architects.

Prepared reports by collecting, analyzing and summarizing information.

December 2017 Qatar Design Consortium – Doha, Qatar

Structural Engineer Trainee

Completed a project based on the design of an external building for a Guard House conforming to British Standards using StaadPro and AutoCAD.

Designed building superstructure as cast-in-situ reinforced concrete beam-column framed structure, acting as Moment Resisting Framed structure.

Applied engineering methods for sound product design to manage understandable execution of calculations and best practices.

Wrote methodological and analytical reports tailored to specific project and client needs.

December 2018 Italiano Contruzioni & Como JV(ICC JV) – Doha, Qatar

Site Engineer Intern

Learned the execution and supervision of work in compliance with detailed drawings of residential and commercial buildings.

Enriched my knowledge about various building aspects, product costing, and resource management Study of Construction and Private Residential.

Prepared and reviewed engineering specifications, scopes of work, schedules of payments, and other documents.

Surveyed site-marked locations and oversaw the construction of roads and other infrastructure components.

Education

2019 - 2021 Vellore Institute of Technology - M.Tech Structural Engineering

Modules include Theory of Elasticity and Plasticity, Structural Dynamics, Advanced Concrete Material and Technology, Design of Bridges, Advanced Foundation Design, Repair and Rehabilitation of Structures, Finite Element Analysis, Advanced Design of Steel Structures, Offshore Structures, Earthquake Resistant Design and Analysis and Design of Tall Structures.

Aspects of theory and design relevant to the static and dynamic behaviour of structures in steel and concrete.

Dissertation: The Comparison of Seismic Analysis in Bridge as Per Aashto, Eurocode and IRC.

2015-2019 Sathyabama Institute of Science and Technology– B.E Civil Engineering

Modules include Structural Analysis, Soil Mechanics, Fluid Mechanics, Engineering Mechanics, Construction Technology, Highway Engineering, Foundation Engineering and Estimation, Cost and Valuation.

Undertook Construction Management. The course enhanced my knowledge about efficient control over the project's budget, timetable, scope, safety, and quality and apply these concepts and theories to realistic scenarios.

Graduated with a First Class Degree.

Academic Projects

February 2020 – May 2018 Design and Assessment of High-Rise Structures Subjected to Wind Load and Earthquake Load.

Examining the impact and performance of high-rise buildings under wind and seismic loading

Develop analytical models and investigate the behaviour of a building under the action of seismic loads and wind loads.

To determine the effect of wind load on various parameters like storey drifts, and lateral displacements in the building.

August 2019 – November 2019 Finite Element Analysis of Doubly Reinforced Section (Beam) With Various Arrangements of Reinforcement.

The investigation illustrates the nonlinear finite element modeling and analysis of doubly reinforced beams for flexural behaviour.

The strain energy, stress intensity factor, and variation in deflection are examined for different sections with various arrangements of reinforcement.

November 2018 – May 2019 Experimental Investigation on Flexural Behaviour of E-Glass Fibre Reinforced Geopolymer Concrete.

Extensive research has been conducted in efforts to reduce the emissions by optimizing fly ash as the replacement material.

The study intends to demonstrate the experimental results of replacing 100% of the cement with high-volume fly ash (class-C) in different concentrations of E glass fibers (0%, 0.25%, and 0.5%) and adding alkaline solutions.

Licenses & Certifications

MMUP-UPDA Certified Civil Engineer, Ministry of Works, Municipalities Affairs and Urban Planning

Member of American Society of Civil Engineers - M.ASCE

Graduate Member Institution of Structural Engineers UK (IStructE, UK)

Chartered Engineer, Institution of Engineers, INDIA

Currently pursuing Project Management Professional (PMP) Certification

Holding a Valid Qatari Driving License

Certifications

Participated in the two-day training on “Advanced Training on Total Station & GPS in March 2017.

Participated in the Technical Webinar on “Structural Failure Causes and Research Thought” organized by & IE (I), Kattankulathur Local Centre & Department of Civil Engineering, SRM Institute of Science and Technology on 12th May, 2020.

Participated in the ‘Technical Webinar on ‘Risk Management Practice’ organized by IE (I), Kattankulathur Local Centre and Department of Civil Engineering, SRM Institute of Science and Technology on 20th May 2020.

Participated in the Webinar on ‘Emerging Opportunities in Civil Engineering organized by Sri.Venkateswara College of Technology, on 20th May 2020.

Participated in the Technical Webinar on “Modern Trends in Construction and Case Studies of Value Engineering in Foundation Design” organized by SRMIST IGS Student Chapter, Department of Civil Engineering, SRM Institute of Science and Technology & IE (I), Kattankulathur Local Centre on 22nd May 2020.

Participated in 3 days online FDP “Behavior of Structural Systems – Bridging the gap between the theory and real-time practice”, conducted by Mohamed Sathak A J College of Engineering, New Delhi 22nd May to 24th May 2020.

Participated in AICON-A-THON 2020 as a team and won third Prize conducted by VIT Institute of Chennai on 24th May 2020.

Participated in Technical Webinar series II on “Sustainable Building Materials: Timber and Bamboo” organized by the Department of Civil Engineering Ramco Institute of Technology, Rajapalayam on 25th May 2020.

Participated in the Technical Webinar on “Research without Border and Faculty Development” organized by & IE (I), Kattankulathur Local Centre & Department of Civil Engineering SRM Institute of Science and Technology on 26th May 2020.

Participated in the webinar for ‘Renewable Energy and Environment Technologies’ conducted by ‘The School of Building and Environment Department of Civil Engineering –Sathyabhama Institute of Science and Technology, Chennai on 06th June 2020.

Participated in the National Conference on ‘Advances in Water Resource and Environment Research’ in June 2017.

Participated in the three-day online workshop on ‘Advances in Civil Engineering’ organized by Vellore Institute of Technology, Chennai from 22nd June to 24th June 2020.

Attended the webinar workshop on ‘Design of Bridges using MS Excel and STAAD pro on 03rd July 2020. Conducted by SKILL & LYNC.

Participated in four days webinar series on “Modern Approached to Bridge Engineering” organized by Vellore Institute of Technology, Chennai, held from 01 to 04 July 2020.

Participated in Virtual International Conference on ‘Emerging Research Trends in Structural Engineering (ERTSE) organized by Vellore Institute of Technology, Chennai, during 16-17 July 2020.

Participated in a one-week short-term training program (STTP) entitled “Challenges and Remedies in Various Fields of Civil Engineering Construction conducted by Vellore Institute of Technology, Chennai, during 21-26 September 2020.

Personal Details

Name: Ruben Verghese Kadakilethu

Date of Birth: 11.04.1996, Born in Qatar

Gender: Male

Present Address: C/o.K.G.Verghese

Mesaken Mesaimeer, Unit 21, Flat 26

Street.. 1010, Zone 56, Bldg. No.87

Permanent Address: Kadakilethu House, Mazhukeer, Kallisserry P.O.

Chengannur, Alleppey Dist, Kerala-689124, India

Reference: Upon Request

Certificates: All attested by the Ministry of Foreign Affairs of India and Qatar

Declaration

I hereby declare that the above given statements are true to the best of my knowledge and belief.

Ruben Verghese Kadakilethu

01st August 2025

Doha, State of Qatar

Contact this candidate