Mechanical Engineer Mobile Equipment
Resume:
ORLANDO TIMBULOY TUMITIT
Address: San Jose, Santiago City, Philippines
Cellphone Number:006**********
Email Address:************@*****.***
Skype ID:For provision
E. EMPLOYMENT HISTORY:
COMPANY NAME: Philex Mining Corporation
POSITION: General Foreman
INCLUSIVE DATES: November 16, 2004- Present
LOCATION: Tuba, Benguet
DUTIES AND RESPONSIBILITIES:
1.Ensure the availability of all equipment needed in the production system of the company such as conveyors, underground crushing plants, apron feeders, cable belt conveyors and loaders.
2.Do repairs of mobile equipment parts such as engine, torque multipliers, transmission, differentials, and frames.
3.Do replacement of major parts of loaders like bucket, wheels, aircon system, and also do minor troubles shooting of electrical problems.
4.Lead the maintenance group in pulling out, hauling and repair of major parts such as gearboxes, motors, rotating drums, drive and tail pulleys, transmission, differentials, drive and tails shafts, and structural
5.Check all assembled major parts such as bearing clearances, gear clearance, alignment, and do testing before installation.
6.Do final assessment of repaired equipment before starting and declaring for final operation.
7.Do alignment of motor-gearbox coupling and do repairs of turbo voith coupling if unbalance.
8.Prepare all needed materials needed in the maintenance and operation of equipment prior to the up coming shifts.
9.Do major repairs of equipment such as conveyors, crushing plants, loading stations and structural lines.
10.In charge in the cleaning of the underneath of conveyors through slushing and scooping.
COMPANY NAME: ALFALFA Construction
POSITION: Equipment Maintenance Supervisor
INCLUSIVE DATES: August 5, 2022-November 15, 2024
LOCATION:Ibulao, Kiangan, Ifugao
DUTIES AND RESPONSIBILITIES:
1.Lead the group in the maintenance and repair of the excavator such as Ex120, Komatsu PC200 and 220, Komatsu and Caterpillar 665 loaders, D375 dozer, Sino dump trucks, CAT graders and other various hauling trucks.
2.Ensure that PMS of equipment must be initiated at the appropriately.
3.Checked all newly arrived equipment and repaired equipment before deployment to their programmed site.
4.In charge in the overhauling of engines, pumps, compressors and motors.
5.Lead the crew in trouble shooting of electrical problems such as engine won’t start, busted lights, defective solenoid of hydraulic system, defective starters and alternators.
6.Trouble shoot hydraulic problems of excavators, loaders, trucks, compressors, dozers (No forward reverse, no movement, No steering, No bucket movement, Locked cylinders, No hoist, No boom movement etc.)
7.Check all arrived parts of mobile and heavy equipment especially to hydraulic parts for pumps, motors, cylinders etc.
8.Work on the hydraulically operated drilling equipment. Repair of gear pumps, gearboxes, seals, percussion motors, replacement of deteriorated parts.
9.In charge in rehab of junked equipment like boom truck, dozers, excavators, loaders, etc. it includes equipment parts such as pumps, compressors, starters, alternators, main control valves of the hydraulic system and pilot system.
10.Initiate the transportation of repaired heavy equipment from the motor pool to the project site.
1.Maintain safety work environment both in the field and at the motor pool.
COMPANY NAME: Santa Clara International Corporation
POSITION: Heavy Equipment Maintenance Supervisor
INCLUSIVE DATES (MM/DD/YY):March 20, 2022- September 2022
LOCATION: Kiangan, Ifugao
DUTIES AND RESPONSIBILITIES:
1.Handled the maintenance team both in the field and motor pool for the equipment such as Articulated dump trucks (A25D, A30E, A35E), Hitachi and volvo loaders, Caterpillar and volvo compactors, excavators (ec210, Komatsu PC200, 210,, PC220, Caterpillar 395, Caterpillar graders, Straight trucks, trailers, Generators, pumps and batching plants.
2.Accountable for handling high valued tools such as pressure gauge, testers, air conditioning filling valves.
3.In charge in the installation of stationary equipment such as batching plant, generator, pumps, silo, etc.
4.Lead the team in trouble shooting of electrical problems like no head light, no park light, no horn, hard starting, no ignition, no charging, etc.
5.Initiate the trouble shooting of hydraulic problems to heavy equipment such as no forward/ reverse, weak tramming, no swing, no steering, internal leakages, etc.
6.Evaluate the performance of equipment and provide recommendations.
7.In charge in the repair activities at the motor pool such as engines, pumps, generators, differentials, transmition, gearboxes, Track body and frames.
8.Lead the fabrication activities such box type drain beams, equipment foundations, casings and dump box repairs.
9.Assigned to evaluate newly arrived equipment and provide recommendations before the delivery.
10.Maintain safety work environment both in the field and at the motor pool.
COMPANY NAME: Free Lance Mechanic
POSITION: Heavy Equipment Mechanic
INCLUSIVE DATES: January 20221- August 2022
LOCATION: Santiago City, Isabela
DUTIES AND RESPONSIBILITIES:
1.Lead the group in the rehab of heavy equipment such as Excavator Hitachi EX 200, EX220, Komatsu PC120, Hitachi loader zw220, straight trucks, crushing plants, installation of steel trust etc.
2.Replace damaged parts of equipment such as Hydraulic pump, MCV, drive motors, swing table bearings, gearboxes, etc. Truck parts such as differential and parts, transmition, engines, cabin, dump box, etc.
3.Assist auto electricians in trouble shooting electrical problem of heavy equipment and trucks.
4.Lead the group in doing construction activities such as building, roads, stone walling and concrete walls.
5.Work in the rice field and corn farm during free time.
COMPANY NAME: Green future innovation
POSITION: Heavy Equipment Rescue and maintenance assistant manager
INCLUSIVE DATES: February 2020- January 2021
LOCATION: San Mariano, Isabela
DUTIES AND RESPONSIBILITIES:
1.Do the evaluation of equipment such as sugar cane harvesters, Straight trucks (SK 65, giga trucks, trailers, cane loaders, excavators (wheel back hoe) tractors, light vehicles.
2.Segregate all equipment subjected for rehab, minor repairs, and ready for operations and send to the field for harvesting and hauling operation.
3.Schedule all maintenance activities and ensure that everything will be done as per schedule.
4.Lead the group in reconditioning of air conditioning unit of equipment and revised the electrical controlled into a mechanically driven motors.
5.Assist the group in trouble shooting of electrical problems to all units in the operation.
6.Lead the group in replacement of major parts of equipment in the mill operation group such as bearings, liners, heaters and coolers, conveyors, etc…
7.Work on activities that requires deeper knowledge such as computer box/ ECM, bearing settings, hydraulic motors settings, hydraulic pump repairs, gear settings, etc…
8.Do the field recue repairs if needed especially those bumped mobile equipment or stumbled units.
9.Initiate the ordering of parts needed in the repair of equipment.
10.Do the report of the monthly expenses of the maintenance group.
POSITION: Mine mechanical Superintendent
INCLUSIVE DATES: February 2014-May 2019
LOCATION: Padcal, Tuba, Benguet
DUTIES AND RESPONSIBILITIES:
1.In charge in the repair and maintenance of mobile equipment ( Atlas Copco ST6C,ST1030, ST14, ST750, TAMROCK LH315, LH410, LH 514). Mine trucks (TAMROCK LPT 250, Volvo A25D, A30D and fuel trucks).
2.In charge in the repair, maintenance and the operation of mine crushing and ore handling equipment such as conveying system (conventional conveyors, underground crushing plants, apron feeders, boulder sizers, slusher, cable belt conveyor, vibrators and loading stations.
3.Handled the personnel in the maintenance group to ensure that the daily production quota is delivered to the mill.
4.Lead the group in doing rescue repairs of mobile equipment such as no travel, black out lightings, detached differentials, shut down engine, no steering, no bucket movement.
5.Assists mechanics in the replacement of major parts of mobile equipment (bucket, booms, transmition, hydraulic pumps, torque multipliers, differential articulating pins, engine, air conditioners, etc.)
6.Do the daily audit of parts to ensure that all needed materials in the maintenance activities are at site to lessen down time.
7.Lead the crew in the replacement of conveyor parts (drive pulley, gearbox, motors, conveyor belt, tail pulleys) Crushing plant parts (jaw crusher liners, bearings, drive motors, frames, vibrators, pan liners, track links, etc.)
8.Assist miners in pack up problems like blasting, bar down, trench face clearing.
9.Ensure that all spillages at trenches are cleaned before operation.
10.Ensure that safety and health protocols are followed.
COMPANY NAME: Philex Mining Corporation
POSITION: Mine mechanical maintenance Planner
INCLUSIVE DATES: October 2006- January 2013
LOCATION: Padcal, Tuba, Benguet
DUTIES AND RESPONSIBILITIES:
1.Create the yearly budget of the Department and seek for approval.
2.Create strategies to reduce the maintenance cost.
3.In charge in the ordering of parts and ensure that maintaining balance at the ware house are always available at any given time.
4.Daily check up of the parts stock at computer and make the weekly check to ensure that volume at the computer and actual are compatible. This is to avoid over stocking and under stocking of parts.
5.Schedule the PMS and repair of equipment.
6.Work 50/50 time schedule in the office and in the field.
7.Work in on call basis if needed.
8.Lead the group in the repair of electric motors, hydraulic motors, drive gearboxes, engines, transmition, differentials, torque multipliers, hydraulic cylinders, pneumatic cylinders, etc.
9.Collate daily maintenance activity and list all replaced parts for budgetary puposes.
10.Initiate, fabricate or acquire materials that are needed for safety purposes.
COMPANY NAME: MAENO GIKEN INCORPORATED
POSITION: CADET ENGINEER
INCLUSIVE DATES: October 2005- AUGUST 2006
LOCATION: LANGKAAN CAVITE
DUTIES AND RESPONSIBILITIES:
1.In charge in re-drawing of Japanese drawings to convert Japanese to English lettering.
2.In charge in piloting of drawn parts to sample fabrication.
3.Do all machine shop works such as welding, grinding, drilling, shearing etc.
4.Operate all fabrication machines.
5.Revise Japanese drawing depending on the environment usage of the machines.
6.Work in critical installation of automated parking system in the Phileippines.
F. EDUCATIONAL BACKGROUND
Inclusive Date : June 2007- April 2004
Course : Bachelor of science in Mechanical Engineering
College/Vocational/High School : Nueva Vizcaya State University
Location: Bambang, Nueva Vizcaya
RME- 0066890
G. CHARACTER REFERENCES (2-3):
NAME- Engineer Wiliam D. Agustin
COMPANY- Former Philex Mining Corporation
POSITION- Mine Mechanical Group Manaher
CONTACT NUMBER-006***********
NAME- Engr. Anecito A. Biala
COMPANY- Philex Mining corporation
POSITION- Manager (Mine crushing and ore handling department)
CONTACT NUMBER- 092********
Name- Engr. Federico S. Dumalan
Company- Philex Mining corporation
Position- Manager (Mine mobile equipment and services department)
CONTACT NUMBER - 095********
Contact this candidate