Electrical Engineer Senior

KHIZER AMIN – SENIOR ELECTRICAL ENGINEER

EXPERIENCE: 10 Years

Mobile: +966-*********

DOB: 20 Oct 1991

Email: ****.**************@*****.***

EXECUTIVE SUMMARY

Highly experienced electrical engineer with a strong background in cable design (HV to LV) and FAT/routine testing in the cable industry. Proven expertise also includes electrical design engineering and site supervision within the construction sector, having worked on diverse residential, commercial, and military projects, including for the US Army Corps.

PROFESSIONAL CERTIFICATIONS/AFFILIATIONS

VALUE METHODOLOGY ASSOCIATE (VMA) - SAVE INTERNATIONAL, USA (2023)

REGISTERED ENGINEER – PAKISTAN ENGINEERING COUNCIL - PEC (Elect/55204)

ENGINEER – SAUDI COUNCIL OF ENGINEERS - SCE (333087) PROFESSIONAL WORKSHOPS/TRAININGS

1. CYMCAP training for current raƟng and induced voltage calculaƟons - Riyadh Cable Group, K.S.A (2024) 2. Value Methodology Fundamentals 1 (VMF1) – Save InternaƟonal, USA (2023) 3. Finance For Non-Finance Professionals – Riyadh Cable Group, K.S.A (2022) 4. Abb IEC Standards, LV Products & Doc Software Training – ABB Head Office – Riyadh, K.S.A (2017) 5. PLC, HMI & Intro to Scada – Professional Training - Bahria University – Islamabad, Pakistan 2016 6. Value Engineering Workshop for Red Crescent Buildings and Ric FaciliƟes – RCJY – K.S.A 2015 PROFESSIONAL EXPERIENCE

1. RIYADH CABLES GROUP COMPANY, RIYADH, K.S.A

TECHNICAL ENGINEER – UTILITIES & PROJECTS AUG 2021 – PRESENT Key Responsibilities include:

Strong understanding of cable manufacturing processes and materials as per SEC (TMSS & SDMS) and IEC standards.

Having a thorough understanding of cable design and construction for each cable component (conductor, insulation, shielding, sheathing), their dimensional tolerances, and the prescribed test procedures with a specialized focus on EHV (230kV/380kV) & HV (110/115/132kV) & HVDC (525kV) cables as per SEC NGSA 11-TMSS-02, Rev 02 & IEC 60840/IEC 62067/IEC 62895 standards.

Developing MV cable designs (6kv to 36kV) as per IEC 60502-2 and SEC specifications NGSA 11-TMSS-04.

Performing precise ampacity calculations for MV and HV/EHV/HVDC cables using CYMCAP software different installation solutions like direct buried, concrete duct banks, UG tunnels (ventilated/non- ventilated), UG troughs (filled/unfilled), UG HDD pipes etc to ensure optimal cable performance for multiple SEC projects.

Conduct detailed calculations for induced voltage, short circuit analysis, power losses, sequence impedance, circulating current, and cable bonding and installation specifications for around 30+ SEC transmission line projects.

Proposing HV/EHV/HVDC Cable trench design parameters and cable tunnel requirements as per SEC specifications NGSA TES-P-104.5 Rev.03.

Reviewing clients’ drawings, PTS documents and arrange meetings with them to support in calculations and cable design issues for different SEC projects.

Ability to understand & apply knowledge of HVDC systems and components.

Responsible of detailed Testing of Processed EHV, HVAC/HVDC & MV Cables which Includes Partial Discharge, High Voltage/ Frequency Testing, Fault Location Testing, Conductor & Screening DC Resistance Testing, Insulation Resistance Test, DC Testing/Integrity Testing, Water penetration Test & Voltage Impulse Tests.

Familiar with Testing devices like Megger, DC Testing Devices & Multi-meters.

Responsible for the Factory Acceptance Testing (FAT) with Customer to check and ensure Quality of Cables before Shipment.

To follow of with Supervisors and inspectors for daily testing to ensure quality and timely delivery of Products.

On site supervision of EHV & HV cables to ensure proper Site acceptance tests (SAT).

Managed technical inquiries and developed technical submittals.

Efficiently distributed technical inquiries to specialized engineers in SAP and actively monitored performance metrics to ensure timely resolution.

Prepare comprehensive technical documentation for customer submissions, encompassing technical offers, data schedules, deviation lists, cable cross-sectional diagrams & drum schedules.

To apply ISO requirements for all tasks executed in the department. 2. EG&G MIDDLE EAST/ABV ROCK GROUP, RIYADH, K.S.A

SENIOR DESIGN ENGINEER – DESIGN & BUILT DEPARTMENT APRIL 2019 – AUG 2021 Key Responsibilities include:

Design LV Systems including Lighting, Small power, Grounding and LPS, External Lighting and Power & LC systems (CCTV, FA, Telephone/Data, PA, MATV etc.)

Design Aircraft Maintenance Hangar Pit system that includes ground power 400Hz, 28 & 270VDC, GPU, 60hz for utilities, pre-conditioned air, compressed air, earth grounding cable reel & data pit.

Design taxiway edge lights layout and the connection of lights with constant current regulator through 5KV cable specially designed for taxiway and runway lights.

Design Lighting and static grounding system at apron parking areas for aircrafts/helicopters.

Perform Design Calculations i-e Panel Schedules, Voltage Drop, Short Circuit Current, Conduit and Cable Tray Sizes, Underground Duct banks, Feeder/Cable Sizing, Capacitor Banks, Grounding Calculations etc.

Review the design to comply with appropriate building/infra codes and standards.

Rectifying Client’s comments on drawings and getting the approvals.

Managing the team of draftsmen to successfully develop shop drawings.

Review the Subcontractor submissions (Shop Drawings & Material submittals)

Selection of appropriate material from manufacturer product data.

Generate BOQ's/Material Take offs & Purchase Orders.

Develop Material Submittals as per project specs.

Witnessing the Factory Acceptance Testing – FAT (Visual Check, No load test, Alarms Test, Load Test) for 645KVA Gensets & 1500-2000KVA Substations

Coordination with Suppliers/Procurement dept. to successfully schedule the delivery on site.

Coordination with QC & Site engineers for successful execution of project. PROJECT AT EG&G MIDDLE EAST/ABV ROCK GROUP, RIYADH, K.S.A Role: Senior Design Engineer

Project Title: Royal Saudi Land Forces Aviation Command (RSLFAC) - 3 Bases Expansion Project, Riyadh, K.S.A Client: U.S. ARMY CORPS OF ENGINEERS (USACE) - MIDDLE EAST DISTRICT, DEPARTMENT OF THE ARMY This design-build project consists of the construction of three (3) Rotary Wing Aircraft Maintenance Hangars, three (3) Air Ground Equipment (AGE) Facilities, and three (3) Warehouse Facilities and associated site work, utilities and infrastructure. These facilities are located at three (3) bases (Tabuk, Dammam & Khamis Mushait) in the Kingdom of Saudi Arabia. Power for each site is 2000KVA. 3. AL HASHMIAH CONTRACTING CO. LLC - HATCO, RIYADH, K.S.A ELECTRICAL ENGINEER – DESIGN & BUILT DEPARTMENT NOV 2017 – APRIL 2019 Key Responsibilities include:

Rectifying Design Drawings & Producing shop drawings.

Calculations of all electrical services for buildings.

Complying with Int’l & local design standards. Coordination with Client, Consultants and Site team to successfully execute the project.

Project Tendering. Developing & Pricing BOQ’s.

Composing official documents like RFP, MST and related Contract documents.

Prepared Material take offs and BOQ’s for around 26 tender projects.

Worked with Design team on the following design project:

Applied Sciences & Social Services College, King Faisal University (Area: 19079.4m & Power: 1500 KVA) 4. OTHAISHAN CONSULTING ENGINEERS, RIYADH, K.S.A

ELECTRICAL ENGINEER – DESIGN DEPARTMENT

Key Responsibilities include : JAN 2017 – NOV 2017

Execution of complete electrical designs as per Int’l and local standards for building services

Lighting Design for Exterior (Site Plans, Parking, Roadways/Streets) & Interior Building including the layouts and the Lighting Control Wiring diagrams.

Cables routing (Power & Low Current) & manholes including the layouts. (Site Plans)

Sizing Main Distribution Panel board & Branch Circuits Panel Board Loads Schedule, Over current Protection Devices, Main Feeders, Transformer, Standby Generators & UPS, Cable Trays, Conduits & Underfloor Raceways, Busways, Boxes & Fittings

Design Low Current Systems, Security systems (Fire Alarm, CCTV & Access Control), SMATV Systems, Public Address Systems, and Nurse Call Systems including riser diagrams.

Capacitor banks (power factor correction) calculation & sizing.

Design the Power outlets layouts as per architectural furniture layouts.

Design the Grounding System, Lightning Protection System & Lightning Risk Assessment calculations.

Provide detailed calculations. (Voltage Drop, Short Circuit Currents, Demand Loads etc.)

Worked with Design team on the following design projects:

Primary Health Clinic, Ministry of National Guard Health Affairs (Area: 11098m & Power: 1000 KVA)

Al-Rajhi Bank (Area: 624.81m, Power: 500KVA & Type: Commercial Building (2 Floors + Roof)

Al-Rajhi Cash Center (Area: 2484m, Power: 500KVA & Type: Commercial Building (2 Floors + Roof) 5. NANX ENGINEERING PVT LTD, ISLAMABAD, PAKISTAN AUG 2015 – JAN ‘16 SERVICE ENGINEER - OPERATION & DESIGN DEPARTMENT

Key Responsibilities include:

Worked on Batteries Regeneration/Restoration.

Initial load testing, cell voltage testing & density testing of acid in batteries, Charging & discharging of batteries.

De-Sulphation test of batteries, Clients dealing & Onsite monitoring of batteries and their tests.

Restored 66 batteries including 2V & 12 V batteries of 90 A – 150 A current rating.

The backup result of restored batteries was restored to 85 – 99%. INTERNSHIPS

1. KHYBER TOBACCO CO. LTD, MARDAN – KPK, PAKISTAN FEB 2016 – MARCH ’16 TRAINEE - PRIMARY PRODUCTION DEPARTMENT

Analysis of different equipment used in automation of cigarette making machine i.e. circuit breakers, sensors, motors, relays, electronic meters and tobacco analyzers.

Inspection of overall tobacco processing in PPD. 2. PAKISTAN TELEVISION CORPORATION (PTV) – ISLAMABAD, PAKISTAN AUG 2015 – SEPT ’15 INTERN – TRAINING DEPARTMENT

Complete understanding of Power Room single line diagram and functions.

Observation of Central Room for Equipment - CRE including sync generator, VDA’s, ADA’s.

Capacitor bank sizing at MV room and calculations, Cable sizing and LV networks designing for offices. 3. OTHAISHAN CONSULTING ENGINEERS, RIYADH, K.S.A JUNE 2012 – AUG ’12 TRAINEE - ELECTRICAL DESIGN DEPARTMENT PRE-EXPERIENCE

Familiarize with design office working environment & Lighting calculations manually & with DIALux software.

Worked on the panel board, circuit breaker, its parameters & calculations. EDUCATION

BE – BACHELOR OF ELECTRICAL ENGINERING 2011 – 2015 HAMDARD UNIVERSITY KARACHI – PAKISTAN AWARDS & ACHIEVEMENT

MERIT CERTIFICATE & MERIT SCHOLARSHIPS 2011 – 2015 HAMDARD UNIVERSITY KARACHI, – PAKISTAN COMPUTER SKILLS

DESIGN SOFTWARES:

1. ADVARIS Cable Design & Costing System

2. CYMCAP

3. AutoCAD Electrical (Expert)

4. ETAP

5. MS Office full Suite

6. Ecodial (Schneider)

7. Dia lux Lighting Software

8. Autodesk Revit Electrical

9. SAP S4/Hana

VOLUNTEER ASSIGNMENTS/PROJECTS

1. VALUE ENGINEERING WORKSHOP, JUBAIL, K.S.A - 4 days OCT 2017 Project Name: P&C of Government Centre in Ras Al Khair Industrial City Workshop Location: Royal Commission in Jubail

Role: Electrical Engineer & VE Assistant

Key Responsibilities Include:

Fully involved in the VE Process (VE Job plan, analysed functions using project information, create innovative ideas, took part in Evaluation and developed Electrical ideas into VE proposals) being considered for implementation.

Assisted in VE team and VE workshop management, prepared and compiled VE report.

Prepared last day VE presentation and presented VE proposals to the decision makers, prepared draft and final VE reports.

Contact this candidate