Electrical Technician Master Electrician

Eduardo Abapo Soriano

REGISTERED MASTER ELECTRICIAN

Madinat Yanbu as Sinaiyah Royal Commission

Mobile#: +966*********

POSITION APPLIED: ELECTRICAL TECHNICIAN

SKILLED: FULL SAFETY AWARENESS

Authorized Permit Receiver APR @ Marafiq

Knowledge and operation maintenace skills of equipment & machinery.

Analytical thinking/problem solving, sound judgement.

Provide quality troubleshooting in a timely manner with a strong safety focus, and personal strength maturity.

Multitasking, fast learning & initiative, teamwork, driving light vehicle.

Understand and read blue print, schematic loop diagram, PLC & DCS. DRIVER’S LICENSE : Philippines License and Saudi License YEARS OF EXPERIENCE : 10 years Foreign and Local

JOB OBJECTIVES: Professional Electrician with over 10 years of experience motivated to bring my education and deep knowledge of designing, installing, operation maintenance and inspecting, commissioning electrical systems to a company that allows and encourages professional growth by recognizing hard work, dedication, and loyalty.

.

PERSONNAL INFORMATION:

Gender : Male

Age : 32 yrs old

Birthdates : September 29, 1992

Birthplace : P-6 Bangcud Malaybalay Bukidnon Philippines Weight : 60kgs

Height : 175.cm

MaritalStatus : Married

Religion : Bible Baptist

Nationality : Filipino

Present Address : Yanbu KSA

Email Add : *****************@*****.***

EDUCATIONAL ATTAINMENT:

PRC LICENSED : Registered Master Electrician

Year Aug. 2024 Jeddah KSA

Vocational School : CAGAYAN DE ORO SCHOOL OF ART TRAINING (COBSAT) Philippines

Vocational Course : EIM NC II ELECTRICAL INSTALLATION and MAINTENACE Philippines

High School : RCVMCFI University 2007-2011 Philippines TESDA : Vocational Course EIM NC II 2011-2013

WORK EXPERIENCE:

EMPLOYER : ERAM ENGINEERING Co. LTD

PROJECT/JOBSITE : YANBU KSA

POSITION : ELECTRICAL INSTRUMENTATION TECHNICIAN

PERIOD : JULY 8, 2023 Present

JOB RESPONSIBILITIES :

WASTE WATER TREATMENT PLANT SANITARY and INDUSTRIAL

Describes work permit types and usage during inspection and maintenance activities.

Sites specific technical problems and describes processes and tools used to resolve.

Calibration of analyzer, flow meter, level, check sensor, and pressure transmitter.

Check and calibrate of actuator air control valve(ACV), Motor operated valve(MOV).

Troubleshooting of Instrument air compressor replacement of pressure gauge, level switch.

Check and repair motorized operated valve and replacement of air pressure regulator.

Preventive/Corrective maintenance of Feeders wire connection, induction motor, jetpump, submersible pump, check and repair electrical system.

Preventive/corrective maintenance of VFD, MCCB, ACB, VCB, checking IR, and DLRO.

Motor Replacement of Bearing, Cable Dismantling, Reconnection of Cable and Motors. Replacement of Street Lights, Troubleshooting of Electrical Control/System, PLC, MCCB, VFD, Maintenance Air Compressor, Turbo Blower and Diesel Generator. WORK EXPERIENCE:

EMPLOYER : NOMAC/AMASEENA COMPANY

PROJECT/JOBSITE : JEDDAH/RABIGH KSA

POSITION : ELECTRICAL HVAC TECHNICIAN

PERIOD : JULY 2016 to AUGUST 2022

JOB RESPONSIBILITIES :

INDEPENDENT POWER PLANT @ RABIGH II

Maintenance of package unit, AHU, VRF Samsung, Celling type cassette, and split AC.

Replacement of compressor, motor bearing, rectifying condenser and evaporator leakage.

Preventive/Corrective maintenance of electrical equipment, motor, auxiliary transformer, step up transformer, dry type transformer and all panel control systems. Motor lubrication, cable inspection and RO working, Heat Recovery Steam Generator, GT, ST, UPS, PCC, and emergency diesel generator.

Working in independent power plant operation and maintenance.

Preventive maintenance low voltage motor getting winding resistance, insulation resistance, check abnormality, retighten screw or bolt, cleaning and fixing unit.

PM/CM of GSUT and UAT transformer 380KVA down to cable inspection goes to feeder, Monthly PM, CM of ACB, VCB and MCCB, VRLA Battery, UPS, and A/C Genetor.

PM/CM air circuit breaker, vacuum circuit breaker checking of mechanical contact and resistance retightened any lose screw doing this with diligence always PPE should be 13.8KV.

Abides by company OHSES rules and precautions. Identifies equipment location and its related hazard areas. Describes personal protective equipment (PPE) used during construction, maintenance, and operation.

WORK EXPERIENCE:

EMPLOYER : SAUDI BINLADIN GROUP Co.

PROJECT/JOBSITE : JEDDAH KSA

POSITION : GENERAL ELECTRICIAN

PERIOD : MAY 2015 TO MAY 2016

JOB RESPONSIBILITIES :

Installation and wiring of power cables 380KV, lightnings, convenient out (CO), electrical panels, and piping PVC,EMT.

Interprets drawings, diagrams, algoriths, and schematics on electrical circuits.

Diagnoses basic electrical faults and isolates faulty componenets, by adhering to standards troubleshooting/testing procedures.

Completes all required electrical authorizations for site Electrical Competence Management System.

Abides by company OHSES rules and precautions. Identifies equipment location and its related hazard areas. Describes personal protective equipment (PPE) used during construction, maintenance, and operation.

WORK EXPERIENCE:

EMPLOYER : GAISANO CITY MALL

PROJECT/JOBSITE : CAGAYAN DE-ORO

POSITION : ELECTRICAL CONTRUCTION and MAINTENCE

PERIOD : JULY 2013 to APRIL 2015

JOB RESPONSIBILITIES :

Building wiring installation such lightings C/O

Installation of SPO and Lighting Panel

Cable pooling from panel to distribution outlet and lightings

Preventive maintenance LV Motors

Corrective Maintenance

Piping PVC and EMT

Conduct electrical check-up

Reading voltage and current ammeter

Monthly maintenance of Generator

OTHER SKILLS:

Safely and efficiently maintain, service and repair plant equipment in accordance with procedures and operating instructions & complete any documentation reports as required.

Minimize downtime by accurate fault finding, investigating, and determining repair actions.

Isolate plant and equipment to their level of authorization for maintenance purposes.

Maintain a high standard of housekeeping. Display safe working practices in the performance of all duties and identify, correct, and report hazardous situations.

Be available for working additional hours as requires and perform other duties. SAFETY TRAINING/SEMINARS:

Authorized Permit Receiver APR Marafiq Training Building 27/01/2025

VALVE and ACTUATOR Marafiq Training Building 14-15/01/2025

Personal Protective Equipment and Arch Flash Hazard @Marafiq Saur 10/2024.

Implementation and Enforcement of Different Environmental Laws @IIEE NWRCSA 7/2024.

Total quality management (TQM) in Electrical Engineering Perspective and Lightning Protection System Application (as per BS EN/EIC 62305 @IIEE NWRCSA 9/2024.

Working at Height and Emergency Preparedness and Response @Marafiq Saur 9/2023.

Standby Attendance and Confined Space @Marafiq Saur 10/2023.

Risk Assessment Awareness and Defensive Driving @Marafiq Saur 11/2023.

Prevention of Explode GAS and OIL @NOMAC 8/2021.

Fire Safety Prevention & Solar Photovoltaic (Solar Energy) @IIEE NWRCSA 6/2020.

Instrumentation and Calibration @IIEE NWRCSA 7/2019.

Plant Induction Orientation and Safety Prevention of Electrical Shock @NOMAC 12/2018. CHARACTER REFERENCES:

Engr. April Solaina (Key Account Manager) +966********* Engr. Joy Fernandez (Electrical Engineer) +966********* Engr. PEE Ely Ganancial ( Electrical Sup.) +966********* Engr. Ryan Bafael (Maintenance Manager) +966********* Engr. M. Mudasir ( Electrical Sup.) +966*********

I hereby certify that the above information is true and correct to the best of my knowledge and belief.

Eduardo Abapo Soriano

Applicant’s Signature

Contact this candidate