Quality Control Exceptional Customer
Resume:
CONTACT
SKILLS
Phase 5c Block 57 Lot 7
Quince St. Grand Royale
Subd., Pinagbakahan, Malolos
City of Bulacan Philippines
EDUCATION
**************@*****.***
************@*****.***
Inspection & Testing
Measurement & Calibration
Attention to Detail
Critical Thinking
Teamwork & Collaboration
Time Management
Communication Skills
Documentation & Reporting
MICHAEL LOPEZ DIWA
WORK EXPERIENCE
OBJECTIVE
To leverage my skills, expertise, and experience to contribute to the company's success and profitability while ensuring exceptional customer satisfaction. I aim to be a valuable asset by delivering high-quality performance and service. Quality Control (QC)
Mighty Corporation
Industry: Tobacco Manufacturing
January 24, 2013 - September 12, 2019
Role as a Quality Control:
As a quality control, I make sure that everything from raw materials to finished products meets quality and safety standards specified in the specification. As a quality control, I visit the factory floor to take samples of products and inspect production, and to discuss problems with colleagues. I also inspect the materials use into the production floor purchased by the company from suppliers and maintain records of supplier performance. This data is important in helping suppliers to improve their performance and for making decisions regarding which suppliers can be relied on to meet specified requirements.
As a quality control I regularly check and test samples of a product, as it would be impractical to test every single item.
The testing methods that I, quality control used, depending on the type of product they are working with. For us, in the industry of tobacco, quality control is responsible for making sure that products meet the standards cigarette making. In accordance with the company standards.
As a quality control I keep a record of all the tests we have carried out. We use forms/charts for the results. We may then write and present a report to show our findings.
As a quality control I will be responsible for declaring that a product is not safe or is not of the specified quality.
If there is a problem, as a quality control I will meet with production staff to work out the root cause of the problem and to decide whether current processes need to be changed. They might make recommendations for improvement. Personal skills:
As a quality control, I must be observant and very good at paying attention to detail. I need to be patient as some tests are complex and take a long time to complete.
I should have a logical, methodical approach to work and I must be accurate when taking measurements and recording figures.
I should have good computer skills because quality control often analyzes, store and display test results on computers.
Depending on the area in which I work, I may also need the ability to use technical equipment and automated testing machines. I will need tact and discretion to point out problems to production workers. Good communication skills are important to motivate others to improve the quality of their work, as well as to explain my findings clearly. Good report writing skills are also useful.
Bachelor of Science in Computer
Engineering
La Consolacion University, City of
Malolos, Bulacan Philippines.
1997- 2001
Electrical Technology
Bulacan State University, City of
Malolos, Bulacan Philippines.
1996-1997
Secondary Level
Bulacan State University, City of
Malolos, Bulacan Philippines.
1991-1995
Duties and Responsibilities:
To monitor the development of all products manufactured by the company. Responsible for acquiring the quality in the product. Monitor every process involved in the production of a product. Ensure the quality of purchased goods as well as finished goods. Recommend the reprocessing of the low-quality products. Responsible for the documentation of inspection and tests conducted on products of a company. Maintain the checklist of inspection processes and protocols used within a company. Responsible to identify the problems and issues regarding quality of the products and must make recommendation to the higher authorities or in-charge.
SMT Technician III
JURONG Hi-Tech Industries Pte Ltd Singapore
Industry: PCBA Manufacturing
July 2005 - December 2007
Duties and Responsibilities:
To Focus & Work on Prototype (NPI) Models & Ensure smooth transfer of the same to Production for Mass Build. To program graphical designs for odd shape components... Operation & troubleshooting of SiemensMachines (HS-50, 60,) (HF, HF-3) (F5HM) & X-series... Operation trouble shooting of MPM (Speed line Technologies) Solder Paste Printers, To train New Machine users about the operations & trouble shooting methods. To maintain reporting system and to update and review the relevant document punctually and accurately. To cascade the 5S information and to monitor its implementation To provide on-line product information support to Product Specialists. Solder pastes screening & parametersetting
Error Corrections of SMT machines
Coordinates with the support groups for any problem encountered during production operations To get an output with good quality and less rejects Major Accomplishments:
Successful completion of New Product Introduction and production like: Motorola: A768I_4609AA, A780_EDGE_4618BF/BG, V235_KAUAIAALG4344AA, ABB_ROYALE, C250_SLG4452BA Maxtor: A3HJ_P1, A5HK_P1, R3HK, R4GL, R6GV, R9GV, RLGH, RBGH UPEK: (FINGER PRINT SENSORS) SM_TCEDA3CA000_13.0
Work Description:
Supporting the production for different type of PCBA (Motorola, Maxtor, Upek, Bluetooth, Meiban, Scm, Perkin) and other new customer
Solve Day to Day Line Problem and Process Defects
Maintain and take care the machine
Servicing the SIEMENS SMT Machines
Perform SMT Machine Programming and Optimization
Responsible for program setup for F.A of the model Provide support for the production line
Troubleshoot major machine problem
Experienced Gain:
Experience in SMT Technician maintaining/ repairing/ conceptual troubleshooting/electronic exposure and machine program setup in assembly line.
OQC, Assembly and Testing Technician
MICROFAB INNOVATION Pte Ltd Singapore
Industry: Assembly
December 2007 - March 2008
Duties and Responsibilities:
To Focus & Work on Prototype (Testing Module) and ensure a smooth quality and effectiveness of the module’s functionality To maintain reporting system and to update and review the relevant document punctually and accurately. To cascade the 5S information and to monitor its implementation. To provide on-line product information support to Product Specialists. Error Corrections of the servo module
Coordinates with the support groups for any problem encountered during the operations. And to ensure to get a 98% F.Y.P and deliver a good quality without error and free of defects Major Accomplishments:
Successful completion of the whole MCA (Motion Control Assembly) without any error Panel assembly on time as required
SIEMENS power supply unit D1, D2 and D4 without any quality and function problem Experienced Gain:
Good team player and Multitasking capabilities.
And to make a 100% client satisfaction
Proven initiative and ability to work with minimal supervision. Experience in assembly firm.
Maintaining a good quality output
Responsibilities:
To maintain and assist the user
To provide help for any computer problem that may occur Troubleshoot any hardware failure
Maintain a good LAN connection to prevent any delay in transaction
I.T Staff
Valdeco Valenzuela Cooperative
Industry: Cooperative
November 2010 - April 2011
I.T Staff
Cold Storage San Fernando Pampanga
Industry: Ice Producer
April 2010 - August 2010
Responsibilities:
To maintain and assist the user
To provide help for any computer problem that may occur Troubleshoot any hardware failure
Maintain a good LAN connection to prevent any delay in transaction
INDUSTRIAL TRAININGS AND SEMINARS
Jun 1995 Elect Instruments DC & AC Fund.
Bulacan State University, Malolos City in Bulacan Philippines Oct 1995 Blueprint & Schematic Reading, Elect Plans & Estimates, Bldg. & Industrial Wiring Bulacan State University Malolos City in Bulacan Philippines Feb 2001 Computer Troubleshooting & Installation,
La Consolacion University, Malolos City in Bulacan Philippines Sep 2001 Business Practicum Company (Ched.Com Internet Café) Oct 04 - Oct 05, 2005 SIPLACE PRO Programming Training SIEMENS Pte. Ltd SIPLACE Training and Application Centre, Corporation Road # 01-03/06, Corporation Place Singapore 618494 Nov 28, - Dec 02, 2005 SIPLACE Advanced Level 1 Training for HF-Series SIEMENS Pte. Ltd SIPLACE Training and Application Centre, 2 Corporation Road # 01-03/06, Corporation Place, Singapore 618494
Dec. 05 - Dec.09, 2005 SIPLACE Advanced Level 1 Training for HS-Series SIEMENS Pte. Ltd SIPLACE Training and Application Centre, 2 Corporation Road # 01-03/06, Corporation Place, Singapore 618494
Dec. 19 - Dec. 21, 2005 SIPLACE PRO Vision Training, SIEMENS Pte. Ltd SIPLACE Training and Application Centre, 2 Corporation Road # 01-03/06, Corporation Place, Singapore 618494
June 11, 2024 Microsoft World for Work
Programmed By Microsoft in Partner with JObstreet.com by seek and mereka July 03, 2024 Microsoft PowerPoint Pro
Programmed By Microsoft in Partner with JObstreet.com by seek and mereka July 12, 2024 Microsoft Excel Excellence
Programmed By Microsoft in Partner with JObstreet.com by seek and mereka I hereby declare and certify that all the information provided in this résumé is true and correct to the best of my knowledge. Therefore, I affirm my right to declare it as such.
Applicant
Michael Lopez Diwa
Contact this candidate