Control System Plc Technician
Resume:
Kurt Laddie P Ablana
Contact#s: +639*********
E-add: *******@*****.***
Linkedin account: https://www.linkedin.com/in/kurt-laddie-ablana-334a8977
Career Objective:
To be able to work in a multinational firm, apply my skills and knowledge in the field of electromechanics and Oil Industry. To attain personal & professional development and spiritual growth.
Work Experiences
December 2019-July 2021 - Electrical and Instrument
DNO PESHKABIR GAS PLANT PROJECT
KURDISTAN, IRAQ
Assists/helps the contractor team with the following tasks:
Do loop checking of field instrument to HMI in Local Equipment Room.
Do complete instrument installation and close out inspection test report in the project completion monitoring system
Loop checking and commissioning test procedure of process control & safeguarding system, prepare and execute the ESD system test.
Do black starting and starting up the Gas plant and check all instruments, ESDV, pumps, blower and inlet/export/injection compressor.
Do function testing of valves including full, partial stroke, bump test and valve signature analysis to ensures that installation and data are according to the hook up details and datasheets.
Do commissioning of hardwired hart compatible instrument for fire & Gas /process safety & safeguarding input & output device.
December 2019-July 2021 - Electrical and instrument
DNO PESHKABIR GAS PLANT, OIL PLANT PESHKABIR and OIL PLANT ZAKO
KURDISTAN, IRAQ
Repairs and trouble shoots GE export Compressor, inlet compressor, injection compressor and control panels and all, heater, pumps.
Repairs and trouble shoot Danfoss VFD drives, soft starter and all motor control.
Responsible in preventive maintenance for all transmitters, ESD, fire & gas detector, alarm system, and wellhead control system,
Repairs and trouble shoot PLC panels, lighting system, well head control system, instrument & gauges (PIT, TIT, LIT, FIT, AIT) control valves, motor operated valve & shutdown valves.
Repairs and trouble shoots Fire & Gas, Alarm system, Boiler control system, Air instrument control system
February 2013 – December 2019 - PLC Programmer / Automation and Electrical Technician
USG BORAL TILES PLANT Middle East LTD
7410 al Kharj Rd. 2nd Industrial
Dammam 3426-4201
Kingdom of Saudi Arabia
Responsible in innovations and improvements of machines such as automation of manual machines and implementation of safety and security control/measures for machines and operators.
Responsible in electrical designing and making of PLC control for automation and Pneumatic system.
Repairs and trouble shoots Face to Face machine, Palletizing Machine, Stacker, Machine, Loading and Unloading Machine, using Programmable Logic control (PLC) Omron CPL1 as well as Modification of Program and Adjustment of Parameters.
Responsible in Programming of LS HMI, XP30, XP50, XP70, XP90 MODEL,
Responsible in Programming of LS GLOFAPLC, GM6, GM7U, MASTER
K120, LS PLC XGB EXEC MODEL
Responsible in Programming of Variable Frequency Drive, Yaskawa AC Drive v1000, Danfoss VLT Micro Drive FC51, Lenze Global Drive8200, Siemens, Sinamics v20 drive, LS SV-IG5A drive, EURA AC Drive.
Responsible in electrical designing and making of PLC control for automation and Pneumatic system of new control marion mixer for joint compound using LS XGB EXEC PLC, LS HMI XP90, 22kw LS VFD, Watt meter instrument using analog signal, Budger meter flow meter.
Responsible in electrical designing and making of PLC control for automation and Pneumatic system of TIPPLE MACHINE line using LS GLOFA GM7U PLC, LS HMI XP30, 2.2kw LS vfd
Responsible in electrical designing and making of PLC control for automation and Pneumatic system of automatic rotator line using LS GLOFA GM7U PLC, LS HMI XP30, .37kw LS vfd, encoder,
Responsible in electrical designing and making of PLC control for automation and Pneumatic system of Denester machine and Auto Dual Filling station using LS XGB EXEC PLC, LS HMI XP70, XGB EXEC PLC,37kw LS VFD, Load cell, Analog module.
Responsible in electrical designing and making of PLC control for automation and Pneumatic system of NEW FORMING LINE using LS XGB 28U PLC, LS HMI XGT PANEL, LS S100 VFD DRIVES LS, H100 VFD DRIVES, PT100 thermostat, XBF RDO4A module for temperature control, XBL C41A RS485 module for MODBUS RTU COMMUNICATION, XBL-EMTA MODBUS TCP/ IP COMMUNICATION.
Responsible in electrical designing and making of PLC control for automation and Pneumatic system of DUAL MARION MIXER using LS XGB 28U PLC, LS HMI XGT PANEL, LS S100VFD DRIVES, PT100 thermostat, XBFRDO4A, module for temperature, XBL C41A RS485 module for MODBUS RTU, XBL EMTA MODBUS TCP/IP communication, WATT meter instrument using ANALOG SIGNALS, BUDGER METER FLOW METER, LOAD CELL.
July 2011 – February 2013 - PLC Programmer/Automation and Electrical Technician
USG BLUE STEEL Middle East LTD
7410 al Kharj Rd. 2nd Industrial
Dammam 3426-4201
Kingdom of Saudi Arabia
Responsible in programming and troubleshooting/repairing Keyence and LS PLC,
Repairs and troubleshoots automated slitting machine using programmable logic control (plc), Allen Bradley especially hydraulic system and control system.
Repairs and troubleshoots 5 roll forming machine and motor control especially 150HP motor using Pneumatic System, servo motor, frequency drive, Allen Bradley PLC.
Repairs and trouble shoots service motors and control system.
Installs/re-installs new and transferred machines from old plant.
Responsible in machine electrical control as well as modification and PLC programming.
November 2004 – October 2010 Plc programmer/ Automation and Electrical Technician
D.Y. Power System (DPC)
Manufacturer of High Voltage Transformer for Microwave Oven
Lt.172454th Mile jalan Genting, Off jalan new Kapar
Rantau, Panjang, klang, 42100, Selangor Malaysia
Responsible in electrical designing and making of PLC control for automation and Pneumatic system.
Repairs and Troubleshoots Automated Machines using Programmable Logic Control (PLC), LG and Samsung.
Repairs and Troubleshoots Stamping & Slitting Machine, EI Machine,
Understands Wiring and Electrical Diagram of Motor Control, Stamping Machine and Programmable Logic Control.
Repairs air conditioning units and Control System.
Repairs and Trouble shoots Electronic PCB soldering Machine.
Responsible in the Preventive Maintenance of All Machineries and Equipments such as Stamping Cutting and Testing Machines, Hydraulic Lifters and Pneumatic system.
Checks & ensures Machines Smooth functions.
Prepares daily Report and Maintenance Schedule.
Reviews work Progress and Solves daily Problem.
December 14, 2007 Excellent Service Awardee
D.Y Power System (D.P.C), Malaysia
October 2000 – August 2004 – Electrical Maintenance Technician
Floro Enterprises
(Plastic Injection Moulding)
Quiapo, Manila,Philippines
Repairs and Trouble Shoots Hydraulic System Electrical Control, Injection Moulding Machine and Motor Control System
TRAININGS AND SEMINARS ATTENDED
March 18, 2012 - Maintenance, Planning, Scheduling, Control and Safety
MEIRC, Training and Consulting
USG Middle East LTD
Dammam, Saudi Arabia
November 27, 2012 - Basic GLOFA and LS PLC DASH CONTROL SYSTEM / LS INDUSTRIAL SYSTEM
Riyadh, Saudi Arabia
June 27, 2013 - Basic First Aid CPR
Human Assets Training Centre
Saudi, Arabia
August 1, 2015 - Advanced GLOFA and LS PLC DASH CONTROL SYSTEM / LS INDUSTRIAL SYSTEM
1. Analog Input and Output
2. Scaling for Temperature Application
3. PLC Communication via Modbus RTU
4. PLC Communication and LS Drive via LS Protocol
5. High Speed Counter
6. PID
7.HMI Alarm Table, Logging, Recipe
October 18-22, 2015 - Pumps and Compressor Operation, Maintenance and troubleshooting
MEIRC Training and Consulting
Dammam, Saudi Arabia
December 21, 2019 to January 16, 2020 - OIL SERV / DNO- PGP OPERATION TRAINING COURCE
Erbil, Iraq
Education
Tertiary Electromechanical
Dual Tech Training Center
Edsa Pasay Rotonda, Metro Manila
1999-2001
Secondary Saint Augustine Academy
Coron Palawan
1992-1996
Primary Tagumpay Elementary School
Coron, Palawan
1986-1992
Personal Information
Date of Birth: 27 June 1979
Civil Status: Married
Nationality: Filipino
Character Reference
Name Contact # Email Adress
Eric Aillaud +336******** ***********@****.**
Gas Plant Operation Manager
This is to certify that the above information stated is true and correct to the best of my knowledge
KURT LADDIE ABLANA
Contact this candidate