Test Engineer Circuit Board
Resume:
Shawn Brouillette
Level III Electronic Engineer
Harriman, TN 37748
*****************@**********.***
Department of Energy (D.O.E) Level Q Clearance – Status – Current 09/14/2026
Over 15 years’ experience in troubleshooting electronic systems down to the circuit board level, excellent diagnostic and repairing skills.
Over 5 years’ experience managing a technical system department.
Over 13 years’ experience managing others.
Q4 Safety Access compliant - Work Authorization Permits
Certificate: Siemens – Basics of Sensors, 2011
Inductotherm Safety, Operation and Maintenance Training
Able to use test equipment: Oscilloscope, multi-meters and function generators.
Repair of AC/DC electrical circuits
Able to read schematic diagrams.
Wiring of alarm sensors and signaling systems
Cable splicing and installation of fiber optics
Soldering skills: through-hole and surface mount
Programming of robotic control systems
Digital circuits
Microprocessor Control
Programmable Logic Circuits
Industrial Motor Controls
Data Acquisition
Printed Circuit Board Design
Use of Multisim, LabVIEW, and Kiel for design and programming of circuits
Authorized to work in the United States
Ability to pass a background check – Current Q Clearance
Work Experience
I & C Startup Test Engineer/Security & Communication
Bechtel National
Oak Ridge TN.
May 2024 – Present
This position’s role is to help in the design, construction, and test before turnover of a 6 billion Dollar Uranium Processing Facility (UPF)
Responsibilities.
Responsibilities include the scoping of facility systems, review of vendor submittals, verifying the validity and accuracy of engineering design before final draft is comprised. I also work with the customer to work through any prerequisite needs involving the testing and any tie-ins into the existing systems pertaining to - Security, Network, Communication, and Instruments & Controls. I write and review Standard Operating Procedures (SOP) as well as write and review test procedures that pertain to Security Systems, CCTV, Telecommunications, Networking and Instrumentation & Controls. I have the knowledge to break down larger systems to the component level in order to determine at what point a system needs to tie into an existing system in order to refine testing/scheduling/operational needs. I am also heavily involved in the design and programming of the Argus security system that is being implemented on the project.
Within this position I am also responsible for handling Work Authorization submittals, checking the request for validity of the information on the forms, making sure all appropriate permits are in place, the proper Personal Protective Equipment (PPE) is listed. I have also been trained for the Bechtel Procurement System (BPS). This function is for the research and procurement of necessary Measure and Test Equipment (M&TE) that will be utilized by the Startup Team.
Senior Engineering Test Technician
Teledyne Brown Engineering
Test & Demonstration Facility
Oak Ridge TN.
June 2021 – May 2024
Responsibilities.
This position included the running of a Vacuum Arc Re-Melter and a Vacuum Induction Melter. Within this process was the setup by verifying that the desired prerequisites and parameters are meet and recorded on a testing run sheet, preventive maintenance, loading and unloading of Depleted Uranium Electrodes into the Melter’s. Daily cleaning of the crucible and strike plate before any loading. Conducted vacuum tests to prevent any contamination of SNM. The preventive maintenance consisted of calibration of components, replacing of gauges, O-rings along with vacuum hoses. This position also consisted of trouble shooting any issues that may arise. Along with these duties came the responsibility of keeping any radiation exposure to a minimum and doing the shutdown process and bringing the system to a safe state.
Within this position I aided in the care of security system repairs and my knowledge of networked systems allowed me to become an in-house IT person.
The responsibilities also included taking care of all the managing the calibrations for equipment when needed, I also sought out, sent out bids, purchased, installed, and configured the maintenance software for the location.
Along with this I also took care of the phone system, computer setup and any other electronic equipment that needed attention.
I & C Startup Test Engineer/Security & Communication
Bechtel National
Oak Ridge TN.
December 2018 – December - 2020
This position’s role is to help in the design, construction, and test before turnover of a 6 billion Dollar Uranium Processing Facility (UPF)
Responsibilities.
Responsibilities include the scoping of facility systems, review of vendor submittals, verifying the validity and accuracy of engineering design before final draft is comprised. I also work with the customer to work through any prerequisite needs involving the testing and any tie-ins into the existing systems pertaining to - Security, Network, Communication, and Instruments & Controls. I write and review Standard Operating Procedures (SOP) as well as write and review test procedures that pertain to Security Systems, CCTV, Telecommunications, Networking and Instrumentation & Controls. I have the knowledge to break down larger systems to the component level in order to determine at what point a system needs to tie into an existing system in order to refine testing/scheduling/operational needs. I am also heavily involved in the design and programming of the Argus security system that is being implemented on the project.
Within this position I am also responsible for handling Work Authorization submittals, checking the request for validity of the information on the forms, making sure all appropriate permits are in place, the proper Personal Protective Equipment (PPE) is listed. I have also been trained for the Bechtel Procurement System (BPS). This function is for the research and procurement of necessary Measure and Test Equipment (M&TE) that will be utilized by the Startup Team.
Project Lead
System Integrations
Knoxville TN
July 2016 – December 2018
Responsibilities.
Responsibilities includes being the project lead for the installation of Commercial Intercom Systems, Card Access Control, Security Systems, and CCTV systems. This included pulling wires, installation of field devices, and termination of cables to include Category 6, Coaxial, and Telephone Cable, along with Fiber and a verity of cable used for access control installation. System programming as needed; responsibilities also involved testing of the systems after installation was complete. I delegated daily assignments to lower-level employees, submitted daily project updates, and handed in as-built drawings. I mentored lower-level staff for them to progress in their job capacities.
Commercial Installation Technician
Protection 1 Security Solutions
Knoxville TN
February 2016 – July 2016
Responsibilities
Responsibilities includes Installation of commercial fire alarm systems, card access, security systems, and CCTV systems. This included pulling wires, installation of field devices, and termination of cables to include Category 6, Coaxial, and Telephone Cable, along with Fiber. System programming as needed; responsibilities also involved testing of the systems after installation was complete. This position requires submittals of daily project updates, and as-built drawings.
Technical Systems Manager
Roger Williams Park Zoo
Providence RI
March 2012 – November 2015
Responsibilities.
Responsibilities includes the management of all technical systems for a zoo which encompasses over 25 buildings on over 40 acres. Responsible for the installation, maintenance, and programming of all systems including GE Alliance 8300 alarm systems, Alliance Card Access and Alliance 8700 Badge programming, Panasonic PBX Automated Phone systems. I was responsible for the installation and maintenance of all CCTV over fiber optics, coax, and/or Cat 5E,
Maintaining all telephony systems, UHF Radio Communications, and the Public Address (PA) System, with the use of hard wire, wireless and VoIP.
Further responsibilities include scheduling projects for the department, prioritizing them by importance, and monitoring work done by technicians. I oversee putting together proposals for capital projects, as well as creating, maintaining and operating within a yearly budget. I oversee technicians including hiring and firing, monitoring daily performance, conducting evaluations, and determining raises, as well as providing education and guidance for success.
This position requires my bringing outside contractors as needed at my digression, including getting quotes, facilitating contracts, hiring contractors, and monitoring their progress to maintain the highest standards. I order parts as needed for all technical projects and maintain inventory. Responsible for retrieving and reviewing CCTV footage when necessary.
I was also responsible for the development and implementation of department Stand Ope5rating Procedures (SOP’s) and the Preventive Maintenance Schedule (PMS).
In addition, I maintain all doors, gates, and locks whether they are electrical, manual, or motorized. I was required to act as the Emergency Response Coordinator (ERC) when emergent situations arise such as animal escapes, severe weather, shelter in place, zoo evacuations, active shooter response training and the implementation of zoo wide procedures for such an event.
Foreman
Jake’s Lawn and Garden
North Haven CT
April 2007 – May 2011
Reviewed daily schedules and disbursement of jobs to employees. Prepared daily work reports and time sheets.
Electronics Technician
Coworx Staffing
Chester CT
September 2008 – 2010
Contract position – Whelen Engineering
Responsibilities
Responsibilities included testing, repairing, and troubleshooting electronic equipment to the component level. Use of oscilloscope, meters, and other test equipment. Soldering of through-hole and surface mount components.
American Heart Association (AHA) CPR and AED certified.
I have held a Pay loader/Backhoe license with the state of Rhode Island.
Experience with:
Bobcat
Backhoe
Bucket loader
All Terrain Lifts
Forklifts
Education
Associate in Science Degree in Electronics Engineering Technology
New England Institute of Technology
Warwick RI
September 2011
Certified Low Voltage Electrician
Porter & Chester of Branford
Branford CT
April 2010
Skills
Management (13+ years), Low Voltage/Electronics (15 Years)
Electronics Engineering (13 Years)
Certifications/Licenses
CPR/AED
Hoisting License
Contact this candidate