Electrical Engineer Design

Sabri Mohammed Abd Al Rahman, BSc. Electrical Engineer

Egypt & Saudi Arabia Email: ************@*****.***

GSM: +966*********

OBJECTIVES:

I am looking for an enriching and challenging position in the field of Electrical Engineering that will utilize my technical knowledge and professional experience to contribute new ideas for future growth of the organization

HIGHLIGHTS OF THE CAREER:

Over 15 years of experience working with government and private organizations in Electrical Engineering field as:

Project Engineer & Site Engineer

Electrical Design & Consulting (MEP)

Electrical Distribution Planning Engineer

Planning Engineer, Electrical Systems

Electrical Network Engineer

E&I Inspection

QA/QC Electrical Engineer

Instrument engineer

CAREER PROFILE:

Experience in consulting, and preparing electrical design and analysis calculations using engineering formulas, international governing codes and standards, (BS, ACI, UBS, IBC) etc.

Specialize in a number of areas including electrical design for residential, commercial or industrial installations, electrical power generation and transmission, and instrumentation and control systems.

Deal with contractor and client queries. Reviewing contractor’s electrical orders and proposals, to organize, draft, endorse and coordinate technical documents and electrical drawings

Prepare material cost and timing estimates, reports and design specifications for electrical and electronic systems and equipment

Direct, and supervise other engineers, designers, drafters, technicians, technologists, programmers, and analysts.

Coordinate and supervise the work of all electrical activities and operations, and with other disciplines such as civil and mechanical engineering

Supervise and inspect the installation, modification, testing and operation of electrical and electronic systems and equipment

Identify and investigate electrical or electronic failures, complex problems to develop and evaluate options and implement solutions

Liaise with local authorities and ministerial agencies

Attend technical meetings, participate in client and company meetings

Expertise include but are not limited to high voltage distribution panels, high voltage overhead lines, underground cables, metering panels

Ability to think creatively and solve problems, working both independently and in a team environment

Use of computer-assisted engineering and design software AutoCAD and Program Logic Control (PLC) and other equipment to prepare engineering design documents, single line diagrams and calculation of load sheets

Excellent time management skills

PROFESSIONAL EXPERIENCE:

Professional Membership: Egyptian Syndicate of Engineers

FROM - TO

DESIGNATION

NAME OF EMPLOYER

02/2022 - TILL 12/2023

QA/QC Electric Engineer ( Quality control electric engineer )

Scope of work:-

QUALITY Control Electric engineer for all electric work executed in HELIPAD for helicopter.

2 helipads & 1 fire station have been implemented with all international specifications followed by the Oman National Oil Company.

Responsible for inspection according to electrical standards & codes such as API, IEEE, NEMA, NETA, NFPA 70 & NFPA 70E.

Review of AFC drawings, installation drawings, cable and tube routings, procedure test plans and related QC documentation to verify compliance to specifications Review /specifications.

Perform receiving inspection (vendor certificates and relevant supplier/manufacturers documents) on electrical and material/ equipment received at site to verify compliance to Company’s purchase requisition.

Witnessing the activities of Laying & testing of all HV and LV cables on the cable trench and trays as per the project specifications.

Electrical distribution panels installation, testing & commissioning.

Installation & testing of earth grid systems.

HV overhead lines network system installations, testing & commissioning.

Witnessing OHL stringing activities as per approved MS.

Checking OHL sag & tension values as per approved sag & tension chart.

HV Transformers installation & testing & commissioning.

Witnessing all activities related to MCC & Motors installation, testing & commissioning.

All electrical fixtures like receptacles, lighting fixtures, and flood lights installations were checked as per standard drawings.

Witnessing the activities of laying & testing of all Instruments cables on the cable trench and trays as per the project specifications

Witness Instruments calibrations and involved Instruments loop checks with Automation Vendors and installation.

Witness instruments & hydraulic tubes leak test & flushing.

Fiber Optical Cable Laying, splicing, OTDR & Insertion loss Tests.

Witness installation, testing & commissioning of UPS system.

Reviewing of all quality documents related to CP systems.

Cathodic Protection system “Installation and testing Impressed current & Sacrificial Cathodic protection systems”.

Witness Cathodic Protection pre-commissioning, DCVG Survey, CIP survey & final commissioning activities for pipeline.

Witness Cathodic protections E log I Survey & final commissioning activities for well head casing.

Witness testing & installation of electrical Isolation kits (Isolation joints & Gaskets).

Al-EZ .Trading, transport& contracting Company.

Services for Oil & Gas, For OMAN OIL National Company.

09/2020 - 01/2022

Project & Site Electric Engineer

Scope of work:-

Site engineer and project engineer approved by the Oman Electricity Company, Mazoon Electricity Company. The work consisted of calculating the loads, supervising and executing electrical work from the electricity distribution stations of 11 kilovolts, medium voltage, according to the specifications, and installing all the internal components of the transformer, the Ring Main Unit, and the main distribution board 1600 amps, 8 outputs, each of them 400 amps, 315 amps or 200 amps, depending on the load that It is connected to the outlet.

Make a schedule of quantities and specifications for the materials needed for work.

Develop a work plan with precision in timing to finish the work on time.

Distribution of workers to work with a technical plan to finish the work quickly.

Project Engineer. For a 1282 meter project, a cable of 300 mm2, 33 kV. Supervision and follow-up work. And check the quality of work. Conducting a test on all measuring and inspection equipment such as miger, multimeter, high voltage test etc. To ensure safety at work and to ensure the availability of safety elements at the site. Supervising the implementation of all safety arrangements on the site before starting work, including barriers and reflective lights ... etc.

Make all the documents for each project. From invoices, work completion certificate, and list of materials and suppliers approved by the Electricity Company

Manahil Middle East Trading & Contracting

L.L.C. Muscat, Oman

03/2019– 01/2020

Consulting MEP Engineer

Scope of work:-

Consultant of electricity, sewage and water networks. For the Barka Marina project for the Ministry of Agriculture and Fisheries.

Design engineer for electrical networks and supervising the implementation of the electricity, sewage and water network

Calculating the full loads inside each building and calculating the sizes of cables and sub-panels necessary for distribution with the main and sub-cutters inside each panel.

Design and distribution of lighting poles within the entire project. And design the decorative lighting with the necessary panels and calculate the number of lighting circuits and how many lighting units will be on each circuit of the panel.

Review the shop drawings carried out by the contractor based on the changes that occur on the site. And correct any error that contradicts the design

Capital Engineering Consulting, Batinah, Oman

03/2015 - 03/2019

Electrical Engineer

Scope of work:-

Head of the Electricity Department in Jawharat Salalah and Golden Hala, two companies with the same owner.

Designing all electricity distributions in stores and offices that are being worked on for investors and supervising contractors for the implementation of the fire protection network, the water and sewage network, and the water desalination plant for the place.

Designing all panels for the Chinese Mall affiliated to Jawharat Salalah Company, including panels for air conditioners.

Design and distribution of lighting poles inside Hala Bazaar for the jawharat Salalah.

Calculating the loads for each plot of land in the free zone of the Golden Hala Company, according to the request of each investor, for the appropriate loads for the facility that the investor will establish on the plot of land. And the distribution of electrical panels that were designed to serve the parts that were rented from investors.

Designing and calculating the loads and cables needed to connect the electricity to each leased plot of land.

Distribution of power stations from which the aforementioned panels will be connected.

Designing and calculating the number of lighting poles needed for the complete free zone.

Make a report showing the cost of solar-powered lighting poles and the difference between them and the cost of regular electricity.

Follow up and organize the maintenance process inside all the buildings of Jewel of Salalah, supervise the companies from which the maintenance offer has been accepted, and check the quality of work and materials used in maintenance

Jawharet, Golden Hala, Salalah, Oman

01/2012 –01/2015

Electrical Design & Consulting

Engineer

Scope of work:-

Consultant and Design engineer,

Supervision on design and processing of all electrical works in all projects related to the Dhofar municipality, ( MPE Projects, fire system, electrical panels design, street lights design, garden poles and decorative lights design ) supervision for all tests ( isolation test and continuity and conductivity test ))( medium voltage test and ring main unit test, earth connection test. (Close monitoring & control for works at all stages of implementation)

Quality supervision in every stage of execution the projects,

Quality control of work and materials according to the specifications of the municipality.

Maintenance engineer for all existing buildings of the Municipality of Salalah (maintenance of air conditioners, maintenance of distribution boards, street lighting, internal lighting of existing buildings, maintenance of water distribution systems, sanitation and change of cables with breakdowns after examination, setting up connection and extension plans for any new electrical loads to the site. Maintenance and supervision of Shaabiyat Hasik project, which is estimated at 6 million Omani Rial.

Supervising the maintenance of all the facilities of the Salalah Fall Festival. Maintenance and modification of the panels needed to connect all facilities, such as lighting poles, water pumps, and fire system pumps, and maintenance of A/C package units in the Salalah karif stadium testing. (Maintenance of Al-Morouj Theatre Air Conditioners in Salalah Festival)

Dhofar Municipality, Salalah, Oman

06/2010 –01/2012

Electrical Design & Project

Engineer

Scope of work:-

Implementation of many projects from A to Z to include construction and creating a high voltage lines (11, 33 KV), underground cables, creating substations with complete connection to the network. All tests ( isolation test and continuity and conductivity test )) ( high voltage test )

Cross checking and performing the necessary safety tests to ensure sure of the safety protocols in line with governmental rules and regulations. Safety of cables and every component in the substation such as transformer, ring main unit and main distribution panel (415 V)

Designing of all electrical panels to include low voltage components like meters, panels etc.

Processing list of required materials for all electrical work in relation to the project to include high voltage projects which include overhead lines, underground lines and substations

Alpha Electric Cont. Co. LLC.,Salalah, Oman

02/2008 –01/2010

Electrical Maintenance Engineer

In charge of all maintenance, service and modification of the electrical panels that are running all water pumps.

Drinking Water and Sanitation Company, Fayoum,

Egypt

07/2007 –12/2007

Electrical Design Engineer

Design of electric panels for star/delta connection and inverters.

Maintenance for motors.

Sales representative for inverters and motors.

Al-Farid for Egyptian Arab Pumps, Egypt

03/2006 – 03/2007

Electrical Maintenance Engineer

Working as a maintenance engineer for all stages of the production line from the beginning of the pistons to finishing ovens.

Maintenance of all sensors used in each stage of production and modification in the Program of Logic Control (PLC) such as increasing or delaying rotation time or electric motors to improve system production.

Al Pharaohs Ceramics, Egypt

EDUCATION:

06/2006 - BSc. in Electrical Engineering

Benha College of Engineering and Technological Sciences

COMPUTER SKILLS:

Excellent proficiency in AutoCAD and Microsoft Office (Word, Excel, Access, PowerPoint)

Interface with sound card in MATLAB

Experience in building databases using Microsoft Access

Effective internet research skills

REFERENCES:

Available on request

WORK RELATED PHOTOGRAPHS:

Available on request

Contact this candidate