Project Engineer System Development
Resume:
Evans Kibet
home: 339-***-****
Cell: 617-***-****
********@*****.***
Evans Kibet
Lynn, MA 01905
Applications\Project Engineer
Experience:
System Development Methodology (SDM) and System Development Life Cycle (SDLC). Utilize AutoCAD 2018 software to accurately reflect existing field conditions based on field notes & existing information, assemble drawings depicting upgrades to existing telecommunication facilities.
Project planning
Status Reporting, Financial Reporting, Executive Presentations, Team Communication
Monthly dashboard and risk management
On-going communication with relevant stakeholders.
Change Control
Vendor management: Provide team oversight of schedules and deliverables. PGH Wong Engineering San Francisco, CA & Boston, MA 11/2023 - Present
Provided photographic records and field report
Reviewed, revised and understand architectural, structural, and civil drawings
Reviewed redline drawings and pictures using Adobe Acrobat
Track completed work, and assist in reviewing contractor’s progress payments
Provided field support services for submittals, RFIs, and requests for contract change orders.
Consulted and notified the resident engineer of any observed non-conformances and assist in the issuance of non-conformance reports as required.
Participated in and/or conduct planning, preconstruction, coordination, progress, scheduling, and field staff meetings.
Review plans, specifications, submittals, shop drawings, change orders, constructability reviews, and contract closeout records.
Assist in detecting and resolving disputes and/or problems
Responded to complaints from the public.
Ensure that all required tests, operations, measurements, and inspections are scheduled, and ordered, and staff working on progress payments by verifying and preparing quantity and progress estimates.
Maintained and managed all records on unit price quantities, labor, equipment, and progress for change order work.
Review change orders for implementation.
Made field measurements and maintained as-built drawing records.
Conducted and/or witnessed testing of contract material, equipment, and installations.
Reported safety and traffic hazards, defective work, and debris to the contractor for correction GIS/OSP/Validation Engineer Richardson, TX 2019-11/2023
Performs complex drafting duties and assignments of limited scope.
Follows standard organizational practices and guidelines.
Solves problems of somewhat complex nature and assists less-experienced employees with solving problems and resolving issues.
Prepares custom maps and diagrams from GIS data.
Meet with users to define data needs, project requirements, required outputs, or to develop applications.
Conduct Research to locate and obtain existing feature sets.
Gather, analyze, and integrate spatial data from staff and determine how best the information can be displayed using GIS.
Compile geographic data from a variety of sources including censuses, field observation, satellite imagery, aerial- photographs, and existing maps.
Analyze spatial data for geographic statistics to incorporate into documents and reports.
Design and update database, applying additional knowledge of spatial feature representations.
Analyze geographic relationships among varying types of data.
Prepare metadata and other documentation.
Provide GIS (Geographic Information Systems) analysis and services to all departments.
Convert electronic files to PDF and upload to File Management Database.
Thorough Knowledge and Experience with reading/interpreting fiber construction as-builts and fiber splicing cut sheets or schematics.
Understanding of ODN or fiber distribution network principles.
Working knowledge/proficiency/experience with ArcGIS feature creation/query tools.
Experience with capturing features and attributes from documentation in GIS application.
Work independently on multiple projects within organizational practices and guidelines.
Using GIS data verification to confirm accuracy and adherence to validation rules.
Experience with reading/interpreting fiber construction as-builts and fiber splicing cut sheets or schematics.
Understanding of ODN or fiber distribution network principles.
Working knowledge/proficiency/experience with ArcGIS feature creation/query tools.
Experience with capturing features and attributes from documentation in GIS application.
Able to work independently on multiple projects within organizational practices and guidelines.
Experience with GIS data verification to confirm accuracy and adherence to validation rules. GW Communications, Coppell, TX 07/2018-12/2018
GIS/OSP Engineer
Adaptation of engineering techniques, procedures and criteria
Devise new approaches to problems and prepare or modify drawings, monitor work compliance to applicable codes, accepted engineering practices and TEP standards
Prepare and develop detailed AutoCAD drawings from GIS and/or site survey
Prepare detailed construction drawings on collocation and raw land sites
Prepare reports related to tower mappings and inspections
Work with multiple jurisdictions to comply with permitting and zoning requirements
Potential overflow into other areas of Civil engineering
May assist with client interaction to include correspondence to clients, problem resolution, and final reports to meet required deadlines
Perform final check on multiple drawing types/carriers
Perform inspections, tower mappings and post construction inspections on telecommunications towers is preferred
Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application, Infinigy/Fusion Solutions Inc Addison, TX 05/2017 – 06/2018 Designer/ A&E Project Manager
Produce AutoCAD design drawing sets for wireless telecom industry.
Work as a team member across multiple fields to assemble a quality product for the customer.
Provided technical support to site installers and construction managers.
Utilize AutoCAD 2018 software to accurately reflect existing field conditions based on field notes & existing information, assemble drawings depicting upgrades to existing telecommunication facilities
Plan, direct, coordinate, and/or budget activities concerned with the management of assigned A&E projects.
Define scope of services for the project and identify anything that is out of this scope, prevent "scope creep".
Interact directly with clients to develop business and manage client expectations to mutually agreed-upon timelines.
Maintain a high quality of work and provide quality control of deliverables before final delivery to client.
Provide project reporting as needed for company Management and client.
Manage project activities ensuring scope, schedule and budget are in line with client objectives.
Design sites with all third party vendors (engineers, civil, etc.) and disciplines.
Maintain schedule, track project risks, issues and decisions at a site and project level, collaborate with Real Estate team and Construction Managers.
Ensure accurate and up to date project data points - dates, notes, forecasts and PO's (open/closed), billing.
Coordinate and attend site walks, ensuring accurate and complete account of the site walk checklist. Freelance (Consulting Services) 04/2015 – 03/2017
American Tower (Crown Castle) Woburn, MA
Preparing all technical information to produce Lease exhibits, Construction drawings for cell phone towers on monopoles, lattice towers, guyed towers, steeples, copula and roof top installations.
Provided technical support to site installers and construction managers.
Provided ballasting calculations and mechanical attachments for wind loads and seismic loads
Commissioned the project and finalize As-Builts
BCM Controls Woburn, MA
Gathering all technical information to produce project submittals
Preparing all required schedules
Writing, compiling, testing and installing control applications programs for security and integration systems.
Design and produce drawings for the purpose of construction of turnstiles and elevator access control
Complete CAD drawings for floor, riser, and termination wiring diagrams from panel to devices
Complete design for CCTV and video monitoring equipment and provided expertise on value engineering for alternative products and services needed to run a unique project
Using AutoCAD 2014 to produce installation and layout packages for electrical and terminal points
Provided Installation procedures and manual guidelines for installing card readers, IP cameras and routers LTK Engineering Services, Boston, MA 12/2013 – 04/2015 Project Engineer / Staff consultant/ systems project manager
Effectively presented information to Management and clients
Designed side sill on the Mass Transit vehicle overhaul. Providing expertise on damaged and rusted structural members and providing solutions to its car-worthiness.
Generating client-ready technical structural drawings and detailed analysis
Researched tools and equipment that will be safe and ergonomically when used during the repairs
Interacting directly with MBTA workers and other engineers on site to assure all procedures are followed per our design and recommendations. Ensure all safety precautions are followed as well as documenting any unknown changes
Provided proof-reading on control d transit procurement for green line type 9 light rail vehicle and its request for proposal guidelines
Provided the client (MBTA) with reports, memos, notes, project manuals and work procedures for replacing parts, making changes and procurement process
Effectively communicated with field engineers, architects, AHJ and stakeholders in response to common inquires or complaints.
Maintaining expert technical knowledge of the following:
Light rail product lines and value engineering
Competitor product lines
ASTM and American Rail/locomotive codes
PanelClaw, North Andover, MA 02/2011 – 04/2013
Applications engineer
Design work for energy efficiency HVAC and Solar Design
Providing customer support to clients through the entire permitting process
Build and develop growth relationships to ensure success of the project as well as to maintain client retention
Generating client-ready technical solar array drawings
Generating client-ready wind loading solar array specifications for permitting
Interacting directly with customers regarding all Panel Claw product technical needs
Interacting directly with customers to identify and solve problems
Performing onsite customer support – periodic domestic and international
Maintaining expert technical knowledge of the following:
All Panel Claw product lines
Competitor product lines
Applicable building codes
Wind loading requirements for all Panel Claw product lines
Electrical grounding requirements of all Panel Claw product lines G4Tec – Touchcom Inc. Burlington, MA 02/2008 – 05/2009 Full designer / Applications engineer
Completed RFI’s, RFP’s, cut-sheets for submittals
Managed changes to project scope, devise contingency plan to limit potential crisis
Design for sprinkler systems and alarms for fire protection
Coordinate design and production for Amag, DvTel, Pelco, Systems and layouts with security points
Design and produce drawings for the purpose of construction of turnstiles and elevator access control
Complete CAD drawings for floor, riser, and termination wiring diagrams from panel to devices
Complete design for CCTV and video monitoring equipment and provided expertise on value engineering for alternative products and services needed to run a unique project
Provide support to field engineers and integration technicians
Design intercom systems using Aiphone, Commend, and Trigon Products Aerial Spectrum, Inc. Wakefield, MA 10/ 2005-02/2008 Project engineer
Coordinate design and production of architectural/engineering from start to finish
Defined project scope, expectations, and deliverables to support the project goals and budget.
Design and produce drawings for the purpose of construction and zoning for clients including T-Mobile, Verizon, Sprint, Nextel, Fiber Tower, Mariner Tower, Crown Castle, MCF, and Cingular
Complete lease exhibits, as-built, FAA-2C/1A surveys and proposals
Complete legal description and easement plans and research of records, codes for related data and information
Provide support and mentoring for junior level designers
Provide field support and field work
Bay state Design Bedford, MA 02/2005-10/2005
Intern / Project coordinator
A/E coordinator with General Dynamics & Sprint/Nextel Wireless Co.
Coordinate drawings and documents with 15 plus A/E firms, engineers, lawyers, and consultants
Revise drawings and documents to verify legal agreements, design changes and optimize the duration for quality control
Track lease exhibits, zoning drawings, construction drawings, as-built for over 280 sites while expediting as necessary
Education:
Boston University - Boston, MA
Project Management (PM Cert License) - October 2008 – Present Wentworth Institute of Technology Boston Ma
Bachelors of Science in Architectural Engineering and Tech. (BAET) August, 2004 Associates in Architectural Engineering and Tech (AET) May, 2002 Associates in Applied Sciences and Mathematics May, 2002 Technical Competency:
Design: Model making, sketches, rendering, construction drawings Engineering: Design of steel, wood, reinforced concrete structures Software: AutoCAD 2000-2018, 2016 Autodesk Revit (Architectural and MEP) (including LT versions), & Inventor 2014, Vector works 10 & 11, Microsoft office, Sketch Up 4.0, Sure Track, Adobe Photoshop, Illustrator, and visual basic Relevant Courses:
Building Tech & Design I & II, Electrical Lighting and Power Systems, Mechanical and Plumbing Systems, Contract Drawings I & II, Estimating and Scheduling, Design of Wood, Steel and Concrete Structures, Site Planning and Engineering, Directed Studies in Architecture
Languages: Fluent in Swahili and proficient in French Reference: Available upon request
Contact this candidate