Delivery Driver Customer Service

SUMMARY:

A results-focused, quality driven CAD technician and REVIT/BIM electric designer with a solid background in providing technical detailing and project design for civil and REVIT/BIM electrical engineering, and architectural projects. Experience in design and layout of hospitals, clinics, commercial buildings, and higher education settings of various electrical projects Many years of experience in in civil engineering design, architectural residential design, exposure to MEP design and various other disciplines. With the capability to be productive in various other disciplines and easily adapt and conform the employers standards, needs, and requirements.

EXPERIENCE:

Parsons Corporation

San Antonio, Texas

Electrical Designer 11/2023 -5/2024

Performing/creating 2D/ 3D BIM models for design and drawing documents for various projects by use of various field data provided, as directed by superiors.

Implementing the use of Auto CADD/REVIT programs. Creating and editing one-line electrical diagrams with limited supervision from engineers, instructed in performing minor conductor sizing calculations, along with use of various standardized charts.

Creating and editing panel schedules, panelboards and project specific notes and applying to document sets with engineers’ supervision, for client submittals approvals. And further educating myself to be productive in this realm.

Key Projects:

oRPMP Program- border entry renovations at various U.S. border crossing and Ports of Entry throughout the United States with new electrical design plan sets for new monitoring/inspections equipment placement as directed by the engineer using Auto Cad 2D/3D programs. Setting up panelboards, one-line schematic diagrams of various electrical devices for same. Under the guidance of engineers.

oUSPS Elevator Renovations Program- Assist in updating existing USPS CAD files throughout the United States and producing new plan sets with electrical designs for new equipment placement as directed by the engineer with the use of AutoCAD 2D/3D programs. Creating one-line electrical diagrams with limited supervision from engineers, performing minor conductor sizing calculations, along with use of various standardized charts, creating panel schedules, and project specific notes

oCamp Stanley, Tx - Tasked to research and create one-line diagrams on military facilities to upgrade existing outdated electrical utilities using field data, maps, and various sources of information as directed and with minimal supervision.

Facility Solutions Group – FSG

San Antonio, Texas

Electrical CAD Designer/BIM modeler 3/2022 -11/ 2023

Experience in the production of, REVIT electrical construction - layout, and design of distribution, lighting controls, equipment connections, REVIT BIM model for hospital, commercial, and school project content.

Involved with virtual design coordination. Handled and updated as-built file updates as needed per project.

Coordinated with trades on the production/review of electrical REVIT designs identified in plans, specifications, submittals, and shop drawings.

Experience in creating and editing of REVIT families, creating Low & medium voltage branches, feeder, runs, MDP, electric room layouts, RCP layouts, and detailed drawings as directed by engineers with minimal instruction. Responsible for researching manufactures REVIT files as needed for projects. Implementing the use of AutoCAD-MEP, REVIT, scan to BIM-electrical, ReCap, AccDocs Cloud based files, BIM 360/360-GLUE, versed in the use of Pro-Core.

Excelled in learning more about the types of work in this field, and the programs provided by this employer to be more productive and continue being a viable asset to the company.

Key Projects:

oRackspace Technology Bldg.

oUT Health Science Center Inpatient Hospital

oComal Middle School

oSAISD - Rogers Middle School Renovations

oMethodist Healthcare Ministries Social Services Bldg.

Weston Solutions (contractor with the Daniel Group Staffing)

San Antonio, Texas

Civil Cad Tech /Designer 11/2021-3/ 2022

This multi discipline firm has exposed me to participate in production of fuels and water resources type government jobs, civil utility rehabilitation projects, multi-state DOT jobs, for and in various states and municipalities as directed.

Performed verification and preparation of layout drawings to meet contract requirements.

Worked on multiple projects concurrently.

Performed verification and preparation of layout drawings to meet contract requirements.

UP Engineering (contractor)

San Antonio, Texas

Civil Cad Tech /Designer 5/2021-7/2021

Responsible for the assembly of residential and commercial site plan production of construction and platting documents on multiple projects. Coordinating closely with engineers and Project Managers to ensure accuracy and completeness. Civil 3-D software

Gonzales Commercial Electric

San Antonio, Texas

BIM Designer 11/-2020-4/2021

Responsible for producing 3D BIM models, review, and management of project drawings for field installation and coordination with other contractors & trades.

Coordinated with trades on the production/review of electrical designs identified in plans,

specifications, submittals, and shop drawings. Layout of MDPs, LDPs, conduit runs & layouts using Navisworks, and Fabrication MEP, Microsoft office software.

Performed QA review of BIM 3D BIM model files for maximum efficiency and accuracy.

Prepared documentation requesting clarification of original design in the form of RFIs and follow-up responses. Handled as-built file updates as needed.

Performed verification and preparation of layout drawings to meet contract requirements.

Key projects:

St Phillips College – Bowden Legacy Bldg.

Winstar World Casino- Parking lot layout, MDP layout

McNiel High School-Round Rock Tx

Marble Falls High School – Marble Falls, Tx

Sonic Porshe-River Oaks

Mendez Engineering

BIM Designer

San Antonio, TX 4/2018-11/2020

Worked closely with Engineers and Project Managers to obtain project information and ensure drawings are accurate and complete.

Performed project management responsibilities on all new projects.

Assured that project related issued were promptly relayed to the Project Manager for action and followed up to assure the project was kept within deadline and budget.

Established and maintained solid relationship with the project leads to ensure designs adhered to project specs.

Mentored new technicians to further expand their understanding of design and drafting skills.

Key projects:

La Gloria Restaurant – Brooks City Base- Plan documents design/layout

Mill Street Crossing- Subdivision plat, and construction documents

Morris P. Hebert Survey and Engineering

Survey CADD Technician Level 4

San Antonio, TX 10/2016-4/2018

Created and assembled various rights of way and surveys boundary layouts, construction-staking, legal descriptions for gas/oil-line route lease for developmental services. Created plan and profiles designs of pipeline route layouts, materials descriptions, for various transmission lines across west Texas and receiver lines into the Houston area storage depots.

CADD Technician Services

President/Owner

San Antonio, Texas 8/2009 –4/2020

Provided electrical, civil, structural engineering and architectural design AutoCAD services in the Greater San Antonio area for a variety of residential plans retail, commercial, and municipal projects for Architects, Civil Engineers, and contractors.

Experienced with grading, drainage, storm water management, roadways, parking lots, sidewalks, utility design, and surveying.

Prepared plans and specifications under the direction of licensed engineers.

Produced detailed sketches of computer-generated drawings in AutoCAD.

Developed construction documents showing topographical contours, elevations, profiles, and cross-sections.

Handled AutoCAD transfers. Operated from red lines.

Analyzed sketches, notes, and other input material to determine and plan the best approach to develop and complete drawings with minimal supervision.

Bury Partners Engineers

San Antionio, Tx

CADD Technician II 10/1999 –8/2008

Successfully managed and coordinated various municipal and private projects from concept through completion.

Informed Project Manager(s) of progress on assigned projects and request work when needed.

Excelled in educating myself with knowledge of new programs provided by employers to be a better asset to the employer

Mentored junior employees; provided instructional and technical methods of productivity and company design standards.

EDUCATION:

Associate’s degree-Electrical Engineering Technology-San Antonio College-1981

SKILLS:

AutoCAD MEP

REVIT

BIM 360

BIM Cloud Scans

ReCap

AccDocs Cloud based files scan to BIM-electrical

Fabrication-MEP

Evolve-Electrical

Blue-Beam

Navisworks Manager

Autodesk Construction Cloud

Procore

Microsoft Office

REFERENCES:

Gregory Martinez – BIM Manager/Designer/VDC--210-***-****

Deacon Jose Escamilla – BIM Dept Manager/Designer/VDC-210-***-****

Ernesto Coronado BIM Manager/VDC/Designer-210-***-****

Contact this candidate