Pipe Welder Corpus Christi
Resume:
Daniel Colmenero
Austin, TX *****
****************@*****.***
Obtain a job in which to utilize my knowledge of oil field, welding, and fabrication experiences. Abilities:
Hard working, highly motivated team player, and safety oriented. Authorized to work in the US for any employer
Work Experience
Semiconductor welder
Ultra Clean Technologies - Austin, TX
June 2021 to Present
Fit part according to specifications Working with tolerances Up to pluss or minus Range of ( .03 / .02 ) and smaller
inches or MM.
TIG. Welding with and with out consumables. Purging tube with Argon gas to protect part so to prevent sugar and concave on the cap.
Wall thickness that I work with .030 and .065
Fabricator/Welder
RYBOVICH - West Palm Beach, FL
April 2021 to April 2021
Contract turn around job. Working with alloys such as Aluminium, stainless and Carbon yacht repair work on Vessels over a million dollars and pipe and structural fiting, wire welding Combination Welder
STREAM CONSTRUCTION - Mathis, TX
October 2020 to November 2020
Location - Voestalpine Plant in Portland, Texas. Contract turn around job. Combo welder fitter, pipe welder fitter, Stick, Tig pipe welder, pipe fitter Removing plant conveyor system and replacing piping and structural system for product. Electrical systems, shut downs pc trouble shoot Contract Turn Around Job
BAY LTD - Corpus Christi, TX
July 2020 to August 2020
Heliarc piping from four inch to ten-inch carbon pipe, running natural gas line to tank battery, grind, cut, and prep material according to drawing specs
Pipe Welder, Welders, Cutters, and Welder Fitters
STRIKE LLC - Corpus Christi, TX
September 2018 to May 2020
Welding on gas piping for refineries and oil field petroleum services. I am certified using the welding applications such as SMAW, GMAW, SAW.GTAW. I was welding in position and roll out. Fabricating and blueprint reading for pipe spools and line locating. Prepping and grinding on material. Measuring and communicating with QA and upper management.
Combo TIG and Stick Exotic Fitter Welder, Driver "Tanker" Gulf Copper Off Shore - Corpus Christi, TX
March 2018 to September 2018
My job scope consisted of fabrication in metal in pipe and structural fitting I operate machinery such as grinders, band saws, forklifts, telescopic forklift, carry decks, cherry pickers, oxygen and Acetylene. Demoing and new construction with prints and without. I also weld high pressure lines TIG and Stick full penetration. I handle many responsibilities in planning workload and employees' needs. lead men position and qualities pertaining to companies' guidelines and customers standards. From blinding lines, purging with nitrogen, and steaming, NDE and walking down packages, to preplanning JSAS. equipment handling and receiving and shipping. Tanker driver receiving and shipping. Heliarc and Stick Pipe Welder. Combo, Welders, Cutters, and Welder Fitters Ohmstede Inc - Corpus Christi, TX
October 2013 to February 2017
Pipe and structural welder. material welded were 2" pipe on up. heavy wall sch. 160. I-beams angle iron, socket welds piping, slip on flanges and butt weld flanges. I've welded on numerous heat exchanger tanks nozzles, piping and boiler tubing welding. Daily print reading and limited supervision. Prepping material by gouging and torch cutting, as well as plasma cutting, grinding. Process in welding are SMAW. GMAW. Gas Tungsten arc welding. Rigger in shop and field iron rigger bolt up, using 3/4 and 7/8 Spud Wrench, Bull pins, sleeve bar were a few of the numerous tools. hand signals and communication at all times. Hydro testing, flange bolt up, hot bolting, blinding lines. field verification's, line locates by reading coordinates from ISO. drawing,
Stick Combo Welder, Welders, Cutters, and Welder Fitters Dynamic Energy Services, Inc - Ingleside, TX
May 2013 to October 2013
Welder, fabricator pipe and structural fitter, red iron rigger (SMAW) hangers, clips and supports for the piping. ISO. reading field verifications for installments. rigger and red iron bolt up. installing pipe in to pipe racks by using chain falls and come a-longs, verifying weight of any material by reading BOM list for weight capacity. I still have all my certifications for water survival swing rope, Huet and rigging I have the safe gulf version from FALC.I have my up to date TWIC card. Fitter Welder
Jessie Martinez Construction - Portland, TX
December 2012 to April 2013
Fitter Welder fabricator. Prepping material by use of numerous hand tools grinding and buffing. cutting with shop saw and oxy- acetylene 4-inch pipe run. slip on flanges, 4" elbow fittings. Building hanger supports for piping, hoisting material in to pipe rack. Blind lines for hydro testing, rigging and iron work fitting" I" beams and Iron Preheating for cutting the Web of the I beam. Welding connection leaving no more than a 1/8 of gap for penetration back gouging. Hand tools 7/8" and 3/4" spud wrenches bull pins sleever bar, chipping air tools, hammer tag lines on both always ends we communicated by means of hand signals and radio. Flatbed driver transportation of equipment to job sites. Flux Core Welder and NDE
Kiewit Offshore Ltd - Ingleside, TX
August 2009 to October 2010
Preparing material as directed by the W.P.S. Grinding, buffing, preheating and post heating all material. Reading I.S.O. prints and taking measurements. Fitting pipe and structure preparation pertaining to the I.S.O. Using numerous hand tools and cutting devices: such as oxy. - acet. plasma, band - saw, grinders. Assisting the fitter with other job's pertaining to the project as a team. Full penetration tacking and certified in stick - welding. Able to pass 6-G. Two inch 160. Also performed nondestructive examinations, flagged pipe welds for x-ray, located lines by reading coordinates, walked down packages, keep track of weld count and percentages to a pipeline and module. Knowledgeable in word and excel programs. Frac Pump Driver / Operator Technician
C&J Specialty Rental Tools - Robstown, TX
December 2008 to June 2009
Worked on wells applying techniques that compelled materials: water, liquid- chemicals, and sand. Used to penetrate damaged openings resulting in new flow channels. Operated and drove trucks. Worked as a pump operator and mechanic. Monitored high pressure lines during pumping stages. Working fast and changing out broken seats, gaskets, O-rings and plungers, to bring the unit back to fracking service. Tanker Sustained class: A - C.D.L and Haz
CDL Tanker Driver Operator
Weatherford Casing - Corpus Christi, TX
March 2003 to November 2008
Operations, picking up drill pipe to rig floor, single man crane operations, fueling up equipment at the different rig sites.
Education
Cert
Del Mar Community College - Corpus Christi, TX
August 2000 to May 2002
Diploma
W.B. Ray High School - Corpus Christi, TX
August 1991 to May 1995
Skills
• Internet, word
• Plasma Cutting
• Welding
• Fabrication
• Flatbed
• Tanker Experience
• Heavy Equipment Operation
• Blueprint Reading
• Forklift
• Plumbing
• Boiler
• Facilities Maintenance
• Shipping & Receiving
• Tractor-Trailer
• Delivery Driver Experience
• CNC
• Manufacturing
• Schematics
• Mechanical knowledge
• Equipment repair
• Joint operations
Certifications and Licenses
CDL
Driver's License
CDL A
Air Brake Endorsement
Tanker Endorsement
CDL C
Hazmat Endorsement
X Endorsement
Gas Fitters License
Contact this candidate