Quality Control Inspector

Mario Monclova

Quality Control Level II

**** ***** **** ****** ******* Park, CA 91706 626 – 674 – 4624 *****.*********@*****.***

Objective

Maintain Traceability, with REV. number, from Drawing to Purchase Order (P.O.), Router or Work Order (W.O.). Utilized AS9102, AS9001, ISO9100. With Geometric Dimensioning and Tolerancing (GD&T). Data Inspection Plan, with AQL, and ANSI 14.5Y, for Quantity of Inspection. Maintain communication with Engineering, for issues regarding discrepancy, and methods to correct any issues

Education

Diploma 07/16/1992 Baldwin Park High School

·Major: Mechanical Engineering Drafting

·Minor: Architecture

·Related coursework: While Attending High School:

Interned for the City of Covina Building Department: from 1/1992-8/1992 Verified Blue Prints According to Zone Requirements and Signed off Permits, surveyed vacant lot & drew out proposed blue print for possible parking lot to the Metro-Link in Covina, micro filmed old files. $5.50/Hour

2005-2010 Citrus Community College Glendora

·Major: History Arts

·Minor: Engineering

·Related coursework:

·Have been in Aerospace Industry for 24 Years

·Quality Assurance Inspector for 17 Years

·Quality Manager 6 Years

2022 Orchid Certification

·GD&T

Skills & Abilities

Management/ Inspection / Sales

·While working at G.E. Richards Company:

·Dealt with client buyers, and their corresponding engineers.

·Source Inspectors Assigned buy Procurement Customer

·Purchased raw materials and fasteners, determined cost (Quote), as well as followed up with outside processing time of delivery.

·Logged and Certified Documents, & Jobs at Component or Assembly Level

·Proficient in Word, Excel, Quickbooks

Set-up & Operate CMM

Program Keyence Video Imaging Measure Machine (KIMM) or Optical Measure Machine (OMM)

Communication

·G.E. Richards Company Inc. Dealt with client Source Inspectors and Auditors complied to their demands, and displayed Q.A. Management and Administrative procedures;

·Communicated via phone and in person

·Sent attached files via emails

·

Leadership

·At G.E. Richards Company, Inc. had to deal with Client Buyers, Source Inspectors, and Followed up on Outside Processing Information (turnaround of components) Client Engineers.

Started as Quality Control

Experience

Quality Control Inspector Level II S&A Solutions. 3800 Van Dyke Avenue #350 Sterling Heights, MI 48312 586 – 522 – 1120 Mike Humphreys

07/01/2024 – 08/2/2024

Visual Inspection of Aerospace Component Surface and Measure Surface Abnormalities, Utilizing Keyence

Using Keyence 7000 Series

Measured Pits on Surface of Blades to see if Depth, or Diameter

Applied in Server Data Inspection Sheet of AS9102 GD&T Mechanical Inspection Plan to Verify Approval.

Quality Mechanical Inspector Level II AtWork Personnel 11801 Pierce Street Suite 200 Riverside, CA 92505 951 – 588– 85517 Jazmun Hernadez

02/25/2024 – 04/02/2024

First Article, In Process Inspection & Final Inspection: Utilized GD&T Inspection Tools, to apply Dimensional Tolerances on AS9102 Inspection Data Plan: Inspection at Receiving Level Utilized Calipers, Micrometers, Point Mic, Height Gage, Slot Gages,

First Article Inspection (FAI), In-Process Inspection, Before Outside Process or (BOP), After Outside Process or (AOP) GD&T Tools Optical Comparator, Micrometers, Blade Mic, Point Micrometers, Calipers, Height Gage with Dial Indicator. Pin Gage and Deltronics Both Plug and Ring Thread Gages, Inside Pipe Micrometers, Tape Measure, Mold Making for Inside Radius to Optical Comparator. Verify FARO Arm Inspection, & Laser Profile & Clocking Position (Not Operate) results from CAD Modeling

AS9102 Data Inspection

Consulted with Engineering and Project Managers for none conformance results.

Utilized Calipers Micrometer, Point Micrometer, Height Gage

True Position measured with, Optical Comparator Quadra Path, Thread for Pitch, Major, Minor, Distance, Radius, True Position, and Using Datum A Stops.

Verifying all Documents for Traceability to match all Documents ( Drawing Work Order, or Purchase Orders.)

Consulted with Operators in Machining Process of how after Cutting they need to Clean their Inspection Tools and Let the Component Cool Off before inspecting Part Shrinks When Cooled

AS9100 GD&T Mechanical Inspection Pin Gauges, Block Gauges< Height Gauge with Indicator & Centers for T.I.R. ( Total RunOut ) Calipers, Micrometers, Plug & Ring Gages for Thread Diameter and Runout.

Mueller Gauge, Inside Groove Micrometer.

Inside Diameter Pipe Micrometer, Tape Micrometer for Outside Diameter

Quality Control Inspector Level II Coneybeare Inc. 2003 North Broadway, Santa Ana, California 92706 714 – 547– 8546 htpp://www.coneyeare.com

12/27/2023 – 01/19/2024

First Article, In Process Inspection & Final Inspection: Inspection at Receiving Level Utilized Calipers, Micrometers, Point Mic, Height Gage, Slot Gages,

True Position Gages, Optical Comparator Quadra Path, Thread for Pitch, Major, Minor, Distance, Radius, True Position, and Using Datum A Stops. Protractors to Measure Angles Internally, inside the Component with Mold Optical Comparator

Verifying all Documents for Traceability to match all Documents ( Drawing Work Order, or Purchase Orders.)

Consulted with Operators in Machining Process of how after Cutting they need to Clean their Inspection Tools and Let the Component Cool Off before inspecting Part Shrinks When Cooled

AS9100 GD&T Mechanical Inspection Pin Gauges, Block Gauges, Height Gauge with Indicator & Centers for T.I.R. ( Total RunOut ) Calipers, Micrometers, Sunnin Gauges for Inside Diameter and Runout. Mueller Gauge, Inside Groove Micrometer.

Quality Control Inspector Level III JOBOT, LLC 3101 WEST COAST HWY, New Port Beach, California 92663 949 – 891 – 0652 ****.*****@*****.***

08/21/2023 – 10/08/2023

First Article, In Process Inspection & Final Inspection: Inspection at Receiving Level Utilized Calipers, Micrometers, Point Mic, Height Gage, Slot Gages,

Plug Gages, Pin Gages, True Position Gages, Radius Gages,

Optical Comparator Quadra Path, Comparator or Keyence (VMM) to Measure Outside Thread for Pitch, Major, Minor, Distance, Radius, True Position, and on OverLay. Using Datum A Stops. Protractors to Measure Angles Internally, inside the Component

Used Microscope 4 to 10X Power for Surface Abnormalities,

Verifying all Documents for Traceability to match all Documents ( Drawing Work Order, or Purchase Orders.)

Consulted with Engineering about Design issues or Edit on sequence for Work Order or Traveler operations. (Inspected drilled holes for true position with out Datum and rejected the Components & Planning.

Since my Previous experience is VMM or Keyence. I programmed as well.

Quality Assurance Inspector Level II Orchid Anzon 11911 Clark Street Arcadia, California 91006 626 – 471 – 3553 www.orchid-ortho.com

09/08/2021 – 08/21/2023

First & Last Piece Article, In Process Inspection Before Outside Process (BOP), Final Inspection Before Outside Process (BOP),

Utilized Calipers, Micrometers, Point Mic, Height Gage, Slot Gages,

Plug Gages, Pin Gages, True Position Gages, Radius Gages,

Optical Comparator Quadra Path, Comparator or Keyence (VMM) to Measure Outside Thread for Pitch, Major, Minor, Distance, Radius, True Position, and on OverLay

Used Microscope 4 to 10X Power for Surface Abnormalities,

Verifying all Documents for Traceability to match all Documents ( Drawing Work Order, or Purchase Orders.)

Consulted with Engineering about Design issues or Edit on FCC form, or FCC to Drawing not Matching

Set-up & Operate CMM Looking to learn CMM, since my Previous experience is VMM or Keyence.

Quality Assurance Inspector Level II Our Staff 16509A Brookhurst Street

Fountain Valley, CA 92708 714-***-**** www.ourstaff.net

03/08/2021 – 09/08/2021 Under Orchid Arcadia

First Article, In Process Inspection, Final Inspection

Utilized Calipers, Micrometers, Point Mic, Height Gage, Slot Gages,

Plug Gages, Pin Gages, True Position Gages, Radius Gages,

Optical Comparator Quadra Path, Comparator or Keyence (VMM) to Measure Outside Thread for Pitch, Major, Minor, Distance, Radius, True Position, and on OverLay

Used Microscope 4 to 10X Power for Surface Abnormalities,

Verifying all Documents for Traceability to match all Documents ( Drawing Work Order, or Purchase Orders.)

Consulted with Engineering about Design issues or Edit on FCC form, or FCC to Drawing not Matching

Looking to learn CMM, since my Previous experience is VMM or Keyence.

Q.C. Inspector PDSTech 370 N. Westlake Blvd. Suite120 Westlake Village, CA 91362 866-***-**** 01/08/2021 - 02/15/2021

AS9102 Rev. B First Article Inspection of Aerospace Parts

For the Largest Aerospace Companies

Office, and (Microsoft Administrative Associated Tools Excel)

Quality Assurance Inspector Level II

Utilized Calipers, Micrometers,

Height Indicator

Quality Assurance Inspector Level II HSC AMETEK Engineered Interconnect Company Rosemead, CA 03 – 11 – 2019 – 08 – 07 – 2020

First Article, Receivers, In Process Inspection, Final

Inspection of Aerospace Parts (Receivers, In-Process, Component and Assembly, to Final Level)

Utilized Calipers, Micrometers, Blade Mic, Point Mic,

Plug Gages, Ring Gages, also used Optical Comparator to Measure Outside Thread for Pitch, Major, Minor Diameters & Drop Down Depth Gage

Height Indicator

Optical Comparator Quadra Path, & [Keyence model IM-7010 and See-Mic SM84] Keyence Programmer, for True Position

Used Microscope 10X Power for Surface Abnormalities, & Feeler Gages for Surface Flatness

Verified all Document Tracking match to Drawing Work Order, or Purchase Orders.

Consulted with Engineering about Design issues

Quality Assurance Inspector Level II The Adecco Group

07/27/2018 – 03/08/2019 (Hired from Adecco Agency to HSC AMETEK)

First Article, Receivers, In Process Inspection, Final

Inspection of Aerospace Parts (Receivers, In-Process, Component and Assembly, to Final Level)

Utilized Calipers, Micrometers, Blade Mic, Point Mic,

Plug, Thread Gages, Drop Down Depth Gage, & Ring Gages

Height Indicator

Optical Comparator Quadra Path, & [Keyence model IM-7010 and See-Mic SM84] Keyence Programmer, for True Position

Used Microscope 10X Power for Surface Abnormalities & Feeler Gages for Surface Flatness

Verified all Document Tracking match to Drawing Work Order, or Purchase Orders.

Assembler Technician Woodward Fasana Road Duarte, CA 91010

626-***-**** 4/9/2018-5/3/2018

Assembly Tech

Utilized Calipers, Micrometers, Depth Micrometer

Utilized Combination Wrenches, Torque Wrenches per drawing and router specifications,

Pressure Test of Orifice Tubes

Hydraulic press of Gears and Roller Bearings

Quality Administrator Adecco Employment Agency Glendale, CA

12/6/2017-12/20/2017

Quality Administrator

Verify Documents Which Corresponds to Purchase Orders in Docusate

Verify LOT Numbers, Part Numbers, and Packaged Box Labels on the Packages match the order.

Verified Router (Work Order) was Stamped per Level of Operation

Generated AS9102 Rev. B First Article Inspection (FAI)

Quality Control Therapak Claremont, CA 7/17/2017-10/18/2017

Quality Control

Verify Components and Kit Assemblies Which Corresponds to Purchase Order

Verify Protocol, LOT Numbers from Kit to Purchase Orders, and Packaged Box Labels, on the Package, as well as the Kits.

Quality Control ESG Employer Resource [(Now) {A Labor Solutions Group}] Covina, CA Therapak 3/9/2017-7/17/2017

Quality Control

Verify Components and Kit Assemblies Which Corresponds to Purchase Order

Verify Protocol, LOT Numbers from Kit to Purchase Orders, and Packaged Box Labels, on the Package, as well as the Kits.

Quality Assurance Inspector Level II Lisi Aerospace the Monadnock Company Gale Avenue City of Industry, CA 10/07/2013 – 01/29/2016

First Article, In Process Inspection, Final

AS9102 Rev. B First Article Inspection of Aerospace Parts (Raw, In-Process, Component and Assembly, to Final Level

Utilized Calipers, Micrometers, Blade Mic, Point Mic, Tri-Roll

Plug, Thread Gages, Drop Down Depth Gage, & Ring Gages

System 22 - Johnson Gage

Optical Comparator Quadra Path, & [Keyence model IM-7010 and See-Mic SM84]

Microscopic Video Imaging Tools such as Profilometer to scope for & Feeler Gages for surface irregularities, & Flatness.

QUALITY ASSURANCE MANAGER / Inspector G.E. RICHARDS COMPANY, INC.

08/17/1994 - 03/03/2012

AS9102 Rev. B First Article Inspection of Aerospace Parts

For the Largest Aerospace Companies

Wrote up Purchase Order for Raw Materials, Outside Processing, & Purchasing Using Quick Books

Wrote up Invoices to Clients, Using Quick Books

Maintained Proper Stock Organization

Maintained Necessary Inventory of Product, and Miscellaneous Materials [i.e. Office, and (Microsoft Administrative Associated Tools Word, Excel, Quick Books Outlook)].

Purchasing to Maintain Production. [Tools, & Material (Raw Material, Fasteners, and Miscellaneous)]

Assembly and Installation of Hardware to Blue Print Requirements at Final Level.

Maintained Quality Material Management

Quality Assurance Inspector Level II

Utilized Calipers, Micrometers, Blade Mic, Point Mic

Plug, Thread Gages, Drop Down Depth Gage, & Ring Gages

Height Indicator

Optical Comparator

Maintained proper rapporteur with Source Inspectors (adhering to their demands)

Maintained proper composure to demands from Client Audits

Contact this candidate