Muhammad Usama Khan
Nationality: Pakistani Date of birth: 19 Mar 2001 Gender: Male
Phone number: +92-316*******
Email address: adzrpk@r.postjobfree.com
Whatsapp Messenger: 030********
Facebook: https://www.facebook.com/profile.php?
id=100************&mibextid=ZbWKwL
Address: Shah Faisal Colony 3, Karachi
ABOUT ME
Motivated and dedicated electrical engineer with a strong academic foundation and a passion for innovative
solutions. Proficient in electrical design, analysis, and troubleshooting, I possess a comprehensive understanding
of electrical engineering principles, coupled with hands-on experience in L.V switchgears and solar systems.
WORK EXPERIENCE
Designing engineer
Nizam Energy [ 13 Jun 2023 – Current ]
City: Karachi
Country: Pakistan
• As an design engineer I draw layouts of on-grid, off-grid and hybrid solar systems usings Helioscope
and PVsyst software.
• For the wiring diagrams ( i.e SLD ) I use AutoCad.
• For 3D modelling on SketchUp software.
• I also manage net-metering documents.
Engineering project assistant
Zelon Engineering Company [ 01 Sept 2022 – 6 Jun 2023 ]
City: Karachi
Country: Pakistan
Zelon Engineering Company is the design and manufacturing company of L.V switchgear and cable
tray.
I worked here as electrical engineer. My core responsibilities were designing, production and
quality control engineer.
• In designing phase I made drawings of switchgears like L.V panels, MCC panels, ATS/MOR panels, PFI
plants, Change over panels, M-DB's, S-DB's and DB's.
• As a Production Engineer I lead the team of 15 people of Electrical and Fabrication. The tasks are
given to them as per their skills to complete the project before the deadline.
• As Quality Control Engineer I inspect the switchgear to make sure there is nothing wrong and in the
end testing is done before the delivery.
Projects completed at Zelon are as follows:
1. Low Voltage Panel
2. Change over Panel
3. MCC Panel ( Motor Control Center )
4. PFI Plants
5. Phase Sequence / Reversal Panel
6. ATS / MOR Panel
7. Main distribution board ( MDB )
8. Distribution boards ( DB )
Internship
AFI Engineering Pvt Ltd [ 1 Oct 2021 – 31 Oct 2021 ]
City: Karachi
Country: Pakistan
• I did internship at AFI Engineering Company of 1 month duration. AFI is a solar company which install solar
systems both commercial and residential.
• Throughout this period I learnt alot about solar systems like on-grid, off-grid and hybrid solar systems. I used
Helioscope and PVsyst software for the installation of solar systems. I also gain hands-on experiences by
visiting different sites projects.
• This internship helps me to get my job at Nizam Energy Pvt Ltd.
EDUCATION AND TRAINING
Bachelors of Engineering
NED University of Engineering and Technology [ 25 Sep 2018 – 14 Sep 2022 ]
City: Karachi
Country: Pakistan
Website: www.neduet.edu.pk
Field(s) of study: Electrical Engineering
Final grade: 3.378/4.0
• During my undergraduate studies, I pursued a Bachelor of engineering degree in Electrical from "NED
UNIVERSITY OF ENGINEERING AND TECHNOLOGY". The program provided me with a comprehensive
understanding of electrical systems.
• One of the notable projects I undertook during my studies was the "Design and Development of E-axle for
electric vehicle which was under the supervision of " DICE FOUNDATION " which just launched Pakistan's
first indigenous electric car named as "NUR E".
• This project allowed me to apply my theoretical knowledge to a practical setting and enhancing my skills in
the domain of electric vehicles.
• By completing my degree in electrical engineering, I have developed a strong foundation in key concepts like:
• 1. Power System Analysis.
• 2. Power Generation.
• 3. Power Transmission.
• 4. Power Distribution.
• 5. Electrical Power Protection.
Skills: Electrical Engineering · Problem Solving · Engineering · Management · Leadership · MATLAB · Microsoft
Excel · Team Leadership · Communication · Teamwork · Microsoft Office · Electrical Design · AutoCAD · Strategy ·
Simulink · Research · Analytical Skills · Project Management · Microsoft Word
Solar PV Design
National Vocational & Technical Training Commission [ 5 Jun 2021 – 9 Dec 2021 ]
City: Karachi
Website: https://navttc.gov.pk/
Field(s) of study: Solar System Installation
Final grade: A+
• Hands-on experience on designing and installation of solar systems like On-Grid, Off-Grid and Hybrid
systems for 6 months. I performed simulation of solar systems on Helioscope and PVsyst and implement it.
• Visited 50MW solar power plant (Solar Sun) which is located in Gharo, Pakistan.
PROJECTS
Design of Three-In-One E-axle ( Electric motor ) for Electric Vehicle
[ 10 Aug 2021 – 9 Jul 2022 ]
• Worked/Managed as a Team leader (Research Assistant) in DICE FOUNDATION USA for designing and
development of THREE-IN-ONE (electric motor) for electric vehicle which was recently unveiled Named NUR
E Pakistan first indigenous electric car. I always believed in quality and satisfactory work. With strong
leadership and project management skills I lead and manage my final year project which was combination
of three teams i.e electrical, mechanical and electronics. I arranged the different meetings with team
members and management of company throughout the year, made Gant chart for year and follow that
which helped us on our project to complete the tasks and project. I worked day and night for this project
which leads me to achieved our goals.
• Basically, an E-axle is a combination of an electric motor, an inverter and the gear reducer to be mounted on
a single axle. So, this leads to development of E-axle. For the selection of motor we searched more than 50
research papers and in the end on the basis of cost, reliability, availability and road profile we selected
induction motor as our motor for electric vehicle. For the designing purpose we selected ANYS MOTORCAD
software. In the designing process there were input parameters calculated through formulae taking more
than 40 pages. If only one parameter changes the whole calculation has to revise which was very time
consuming and also hard work. To overcome long calculation we made a GUI MATLAB software in which
calculations results were just in seconds. With the help of this software we completed our design phase in
ANSYS MOTORCAD getting the desired results 191 N-m torque and 3400 rpm. Cad modelling was
performed in SOLID WORKS software in which we made models of rotor, stator, shaft, and casing. Heat
load is a major factor in the performance of motor. It must be less for the performance of motor. To
calculate it we used MATLAB SOFTWARE in which we made Simulink model. Through the torque and
efficiency graph we calculated heat load i.e 416 W which is good as compare to 95.6% efficiency for our
elector motor.
• The major findings of our project is Torque, RPM and Heat load with values of 191N-m, 3400 and 416 W
respectively.
Solar water gyser
[ 17 Nov 2021 – 3 Dec 2021 ]
• For installation of solar water gyser, around 50 evacuated glass tubes were used which makes the water
hot.A temprature sensor is also used to measure the temperature of water which was linked with
automatic valve to switch on/off as per need of hot water.
• This project is at NEDUET masjid...
Home automation system using Ardunio
[ 9 Sep 2019 – 12 Nov 2019 ]
• This home automation project was to controll the appliances of any room of a home using sensors with the
help of arduino. This system was a switching on/off of appliances of a room.
• The working principle is as you enter the room sensor automatically open the appliances ( i.e fan, light etc )
and when you go out it will automatically make it off.
• The main advantage of this system is of saving of electricity and can save you from any hazardous situation
which could cause from continuous running of appliances when you are not at home.
Variable Power Supply
[ 29 Oct 2018 – 8 Feb 2019 ]
• This is my first university project in which we have to built 30volts variiable power supply.
• The components used for power supply are a step-down transformer, capacitors, resistors, voltmeter,
connectors, potentiometer and cables.
• The duration of project was of whole semester but I finished that project in a week.
• This project helps to know the basics of electrical engineering.
DIGITAL SKILLS
Microsoft Office ( Word, Excel and Power Point ) / Google (Google Meet, Google Docs, Google Classroom, Google
Drive, Google Maps, Google Forms) / Matlab/Simulik / Ansys MotorCAD / Multisim / AutoCad / HelioScope (
Solar System Software) / PVsyst software / SketchUP (3D modelling)
COMMUNICATION AND INTERPERSONAL SKILLS
Soft Skills
• I have completed a certified engineering soft skills training course
• It helps me to boost-up my soft skills.
• The duration of this training course was a total of 12 hour from May 28 - July 11
• It was funded by Fulbright Pakistan/ United States Educational Foundation in Pakistan.
NETWORKS AND MEMBERSHIPS
Member
[ IET society of NED University Of Engineering and Technology, 4 Aug 2020 – 7 Feb 2021 ]
• I joined IET society in promotion domain to enhance my knowledge in vast field of engineering and boost-up
my soft skills which really helps me to enhance my knowledge by visiting different power plants located in
Karachi and by organizing different seminars of IET society.
CONFERENCES AND SEMINARS
Certificate of Participation
[ SENTEC society of NEDUET Karachi, 16 Jan 2019 – 16 Jan 2019 ]
• I attended TECHFEST'19, a one day seminar on Virtual Reality, Data Analytics, Smart Grid and Haptics
Technology organized by SENTEC ( Society for the Promotion of Science, Engineering & Technology ) at NED
University of Engineering and Technology.
• This seminar helps me to increase my knowledge in different domains of Engineering and Sciences.
Certificate of Participation
[ Karachi, 24 Dec 2021 – 26 Dec 2021 ]
I attended a three day online debate session under the banner of Mashq Training and Consultancy to enhance
my knowledge about parliamentary debates and softskills.
Certificate of Participation
[ Expo Centre Karachi, 27 Sep 2022 – 27 Sep 2022 ]
• I participated in career connect 2022 where I interact with experienced professionals and engineers shared
my ideas and thoughts and get to know about the practical life experience in the field work.
LANGUAGE SKILLS
Mother tongue(s): Urdu
Other language(s):
English Chinese
LISTENING B2 READING B2 WRITING B2 LISTENING A1 READING A1 WRITING A1
SPOKEN PRODUCTION B2 SPOKEN INTERACTION B2 SPOKEN PRODUCTION A1 SPOKEN INTERACTION A1
Levels: A1 and A2: Basic user; B1 and B2: Independent user; C1 and C2: Proficient user
HOBBIES AND INTERESTS
Cricket
I have been playing cricket from my childhood and have developed a deep passion for the sport. I regularly
participate in local cricket leagues and enjoy the camaraderie and teamwork it fosters. Through cricket, I have
learned the importance of strategic thinking, perseverance, and effective communication.
Movies
I have a deep passion for movies, particularly action films from Hollywood that captivate me with their thrilling
plots, high-octane action sequences, and impressive special effects. I am especially fascinated by time-traveling
movies, as they challenge the concept of linear storytelling and explore the complexities of altering the past and
future. Additionally, I find movies showcasing advanced technology intriguing, as they offer a glimpse into
futuristic concepts and innovative possibilities.