PROFILE

Passionate Mechanical Engineer with

*+ years of experience in Maintenance,

Projects, Commissioning, Major

Turnaround Shutdowns in Oil&Gas,

Chemical/ Solar Plant, Power Plant and

Aluminum industries.

AREAS OF EXPERTISE

• Oil and Gas - Maintenance

• Shutdowns / Turnarounds

• Operational & Technical interface

• OBL/Pipe Line Project

• HSE & Risk Management

• Emergency works

• Manpower/Equipment optimization

• Lifting plans/MS/JHA

• Pre-commissioning / commissioning

• Piping & Major Structures

• Hot-Tapping & Tie ins

• Vessels & Columns

• Reactors & Heaters

• Cold Box (ASU)

• Pumps, Skids & Filters

• Fin Fan/ Condensers

• Heat Exchangers / Cooling Tower

• Furnaces

• Reformers / Waste Heat Boiler

• Gas Compressor

• Turbine / Gear box

• Steam Generation Boilers

• Solar Thermal Power Plant

• Tanks (Naptha,Diesel & Raw water)

• Filters (Wax, Lube oil)

MAGESH SHANMUGAM

MECHANICAL ENGINEER- STATIC

Contact no.: +974-******** (Qatar)

+91-852******* (India)

Email : adzonj@r.postjobfree.com

LinkedIn: linkedin.com/in/magesh-shanmugam-7ba31b147 WORK EXPERIENCE

Qatar Engineering & Construction Company WLL

Mechanical Engineer - (March 2018 – till date)

ORYX GTL – Qatar Petroleum

• GTL-DIESEL TANK- Emergency Shutdown -2023 with ORYX GTL from March 2023 till April 2023 as Area Coordinator-Mechanical. Site preparation, Equipment identification, PTW preparation & Equipment opening, Replacement of Filters in Reactor(M3-M4), attend the weld repair of steam coil and pressure testing.MAC cooler Bundle replacement and pressure testing. Reformer (Oxygen and Gas burner replacement). Tank- Diesel leak (repair of sump & bottom plates, floating roof and patch work).

• GTL- WAX TANK -2022 Shutdown with ORYX GTL from September 2022 till January 2023 as Area Coordinator-Mechanical.

Statutory Inspection of the Tank activities in external – support, Insulation ring, anchor bolts repairs. Internal repair in tank base plate, annular plate replacement and patch work, sump weld repairs, coil tube hydro testing and Tank static test.

• ASU-2 Emergency Shutdown- Compressor Shelter repair & replacement of roof structure -2022 with ORYX GTL from July 2022 till December 2022 as Area Coordinator-Mechanical.

Replacement of Compressor rotor & EOT Crane, damaged Static and rotating equipments, Piping & Structural jobs, Hydro testing of oil service lines, Insulation & painting jobs, Lube oil flushing, Rotor solo run & Flange management.

• PITSTOP Shutdown Tr-01 & Tr-02 Equipments Shutdown -2021- with ORYX GTL from November 2021 till April 2022 as Area Coordinator-Mechanical. Work pack, Method Statement, JHA preparation, Maintenance of the Static equipment like Reactor, Column, Vessel, filters and Exchangers, Control valves and PSV’s, Fin fan coolers.

• GASAL (YANGO) Equipments Shutdown -2021- with ORYX GTL from May 2021 till June 2021 as Supervisor -Mechanical. Repair of Corroded CW supply lines & Shutdown equipment like Column, Vessel, filters and Exchangers, Control valves and PSV’s.

• SGB (C) & (A) Shutdown -2021 with ORYX GTL from (October 2023 till November 2021) (March 2021 till April 2021) as Area Coordinator- Mechanical.

Statutory Inspection of the Steam Generation Boiler-C activities, Burner and coil tube repair & replacement with support of Vendor. Internal WORK EXPERIENCE CONT’D

STRENGTHS

• Project Management

• Construction Management

• Subcontract Management

• Site Management

• PTW Receiver

• Performing Authority

• Client Relationship

Management

• Safety Compliance

• QA/QC Compliance

• Multi-tasking competency

• Execution

• Communication

• Teamwork

• Versed in MS Office Suite

applications

EDUCATION

2013-2017 - B.E in Mechanical Engineering,

Rajas Engineering College,

Anna University, Tamil Nadu, India

LANGUAGES:

• English

• Tamil

• Hindi

• Malayalam

PERSONAL DETAILS

Date of birth: 01/06/1996

Nationality: Indian

Marital status: Single

Passport # P5809435

Passport Expiry: 01/01/2027

Present Address

B.no -25,

St.609 Al Merqab Street,

Alkhor,

Doha Qatar

components (Baffle plate, pipes) removal in Steam drum, mud drum and performed coil tubes cleaning, NDT (Boroscopy, IRIS, MFL), Pressure test. Economizer, Flue gas sparger duct, Stack inspection, Air intake silencer & vent silencer repair, control valves, Level Gauge, PSV mechanical servicing

• GTL- Turnaround (TA) Shutdown -2020 - with ORYX GTL from January 2020 till October 2020 as Supervisor-Mechanical/Piping. Maintenance of the Static equipment like Reactor, Column, Vessel, filters and Exchangers, Fired Heaters, Boiler, Control valves and PSV’s, Fin fan coolers, Flare, Tanks and Clarifier in Refinery, Gas circuit and utility area.

• GTL- Diesel and Naphtha Pipe Line Project -2020 (2 Km) to Jetty with ORYX GTL from February 2020 till May 2020 as Piping Supervisor. Work Package preparation, Preparation of method statement, prefabrication, ECPW (concurrence from nearby facility), Demolition of existing line by cold cutting, erection, inspection and testing of Diesel

(10”) and Naphtha (6”) lines, radiography and Hydro testing and commissioning of GTL facility.

• SGB (C) Shutdown -2019 with ORYX GTL from October 2019 till November 2019 as Supervisor-Mechanical.

Statutory Inspection of the Steam Generation Boiler-C activities, Burner and coil tube repair & replacement.

• QSTEC –Maintenance Base Load Supply - 2019 with Qatar Solar Technology from August 2019 till October 2019 as Supervisor- Mechanical.

Maintenance of the Static equipment like CWD Reactor(polypropylene), Vessel, filters and Exchangers, Control valves and PSV’s, Boiler, RO pump.

• QATALUM –Maintenance Base Load Supply - 2019 with Qatar Aluminum Industry from April 2019 till July 2019 as Supervisor- Mechanical.

Maintenance of the Hydraulic and Pneumatic systems like RAM station, Furnace(660 C), stripper, Vessel, Pumps, filters, Exchangers, Conveyer

(molten metal trays), coolers and EOT crane operation in Cast House-unit.

• GTL- Train-01 Shutdown - 2019 with ORYX GTL from January 2019 till February 2019 as Supervisor-Mechanical. Maintenance of the Static equipment like Reactor, Vessel, filters and Exchangers, Control valves and PSV’s, Fin fan coolers in Refinery, Gas circuit and utility area.

• GTL- Rotating Maintenance- 2018 Base load Supply with ORYX GTL from November 2018 till February 2019 as Supervisor-Mechanical. Maintenance of the Rotating equipment like Pump, strainer, Fin fan coolers in Refinery, Gas circuit and utility area.

• QATAR GAS - Train- 03 & 05 Equipments Shutdown - 2019 with Qatar Gas from July 2018 till November 2018 as Supervisor-Mechanical. Maintenance of the Static equipment like Reactor, Vessel, filters and Exchangers, Burners, Control valves and PSV’s in Sulphur and Utility. WORK EXPERIENCE CONT’D

• QAFCO- Urea & Ammonia unit Tr-05 & 06 Shutdown - 2018 with Qatar Fertilizer Company from June 2018 till July 2018 as Supervisor-Mechanical.

Maintenance of the static & Rotating equipment like heat exchangers, vessels, columns, furnaces/Fractionator, valves and Pumps.

• QATAR GAS - Train- 06 Gas Turbine Overhauling & Generator Replacement - 2018 with Qatar Gas –south from June 2018 till July 2018 as Supervisor-Mechanical. Overhauling of gas turbine and major generator replacement activities involved mechanical support and related spare parts installation, laser alignment of rotor and equipment commissioning.

• QATAR GAS - Train- 06 & 07 Equipments Shutdown- 2018 with Qatar Gas from June 2018 till July 2018 as Supervisor-Mechanical. Maintenance of the static equipment like heat exchangers, vessels, columns, furnaces, valves.

RELIANCE ENGINEERS Pvt Ltd – Maintenance (Utility) from June 2017 till December 2017 as Mechanical Supervisor ONGC Job was little challenging. Scope was shutdown maintenance of Utility & Crude Oil unit. My job role was Site maintenance for Piping and equipment (Static and rotary) repairs as per client instruction. Completed the work within the schedule.

VESTAS – WTG (wind farms) with Techsun Energy Engineering Pvt Ltd from December 2015 till May 2017 as WTG Operator (Part time).

This Job was the first independent assignment from my Company. Scope was Maintenance & Operation of the WTG machines

(WIND TURBINE GENERATOR), SCADA monitoring & communication with surrounding wind farms. Calculate daily reading of all machineries. I could complete the job within the maintenance & operation schedule was able to solve all site issues without compromising the quality.

REFERENCES

Mr. R P Ganesan

Maintenance Planner– Gas Circuit

ORYX GTL, RLIC, QATAR

MOB: - +974-********

Email: adzonj@r.postjobfree.com

Mr. Ibrahim Babu

Mechanical Supervisor

ORYX GTL, RLIC, QATAR

MOB: - +974-********

Email: - adzonj@r.postjobfree.com

DECLARATION

I hereby declare that all the details furnished above are true to the best of my knowledge and belief. Date: 11-June-2023 MAGESH SHANMUGAM

Contact this candidate