Project Site Instrument Technician
Resume:
WORK HISTORY
Responsible in the overall day-to-day maintenance, repair and operation of the site,
and performing instruments isolation as part of Permit To Work (PTW) system Selected and used the correct tools and equipment for specific tasks, including hand tools, calibration gases, measurement and testing equipment Carried out other similar or related duties, such as observing company HSE regulation, maintaining the work site in a clean and tidy condition, and completing details of the repair or maintenance carried out in the maintenance log Signed off work orders according to maintenance records history (SAP) and ensured that they were completed within the correct timeframe Ensured that all instrumentation planned maintenance work were in progress and completed satisfactorily
Responsible in the calibration of field instrumentations and testing of Fire & Gas system to ensure that they were fully operational within specification at all times Carried out preventive and routine F&G maintenance schedules on all units as directed and in accordance with maintenance procedures Opened permits, located faulty components, repaired and replaced spare parts, calibrated, cleaned, reassembled, refitted and conducted first hand tests on F&G instruments and systems using a variety of hand, pneumatic tools, standard calibration gases and testing equipment
Instrument Technician
Hexagon SA
Project Site: FPSO Sendje Ceiba (Trident Energy), Okume Field, Bata, Equatorial Guinea Fire and Gas Technician
BP Exploration (Angola) Ltd.
Project Site: Block 31 FPSO PSVM, Luanda, Angola
ABOUT ME
Experienced and efficient Instrument Technician with over 25 years background in the oil and gas industry. Highly motivated to continue contributing to the overall productivity of the organization with my demonstrated skills in onshore/offshore installation, commissioning, and system maintenance. ACHIEVEMENTS & RELATED SKILLS
Installation and commissioning of Wellhead Platforms and Process and Drilling Platforms ahead of the actual production start-up
Detailed inspection and on time completion of all instrumentation, fire and gas system maintenance and critical tasks during oil and gas plant shutdown
Programming and simulation through the use of Hart Communicator
adzcae@r.postjobfree.com
Darryl O. Salazar
Blk 3 Lot 31 Happy Homes Fairview III
Phase II, Magang, Daet, Camarines
Norte 4600 Philippines
January 2020 to
July 2022
October 2018 to
November 2019
Supervised the installation, maintenance, troubleshooting, repair and testing of a wide range of electric, electronics, pneumatic and microprocessor based analytical instruments and process analyzers, lab analyzers, instrument equipment, and associated control
Responsible in function testing fire and gas safety system such as H2S detectors, Heat and Smoke detectors, Search Line Infrared detectors, Line of Sights, etc. Hands on testing of all types of Fire and Gas detectors including setting up of open path flammable and toxic gas detectors, and of field instrumentation such as Temperature, Flow, Level and Pressure Transmitters Experience in the interpretation of all engineering documents including datasheets, P & IDs, Cause & Effect Diagrams, Loop Drawings, etc. Reported to E/I Lead Technician
Responsible in the overall day-to-day maintenance, repair and operation of the MHI M501J Gas Turbine
Performed instruments isolation as part of Permit To Work (PTW) system, calibrated field instrumentations, and tested Fire & Gas system Carried out preventive and routine F&G maintenance schedules on all units and ensured that all instrumentation planned maintenance work were completed Trained and certified in Hazardous Area Course (COMPEX) Reported to Instrument Supervisor
Responsible in the overall day-to-day maintenance, repair and operation of the Solar Titan 250 PG Gas Turbine, 12MW
Responsible in signing off work orders according to maintenance records history
(AMOS) and ensuring that they are completed within the correct timeframe Prepared necessary work permits with necessary approvals from Performing / Area authority and assembled tools, measuring equipment and material Reported to Instrument Supervisor
Responsible in the overall day-to-day maintenance, repair and operation of the Solar Titan Gas Turbine
Acquired experience in using several devices such as Hart Communicator, Pressure and Temperature calibrator, etc.
Trained and certified in Hazardous Area Course (COMPEX) and SS2100 Moisture Analyzer and Calibration of Process Instrumentation IInstrument Supervisor
S J E&I Inc. (DAELIM)
Project Site: PAG-3 420 MW Coal Feed Power Plant, Ibabang Pulo, Pagbilao, Quezon, Philippines
Instrument Technician (Operation and Maintenance)
AMEC Foster Wheeler
Project Site: FSO Liberdade, Bayu Undan Offshore Facility, Timor Sea Joint Petroleum Devt. Area, Timor Leste
Instrument Technician (Operation and Maintenance)
Exxon Mobil
Project Site: ESSO Exploration Angola (Block 15) Ltd., Kizomba C- FPSO Mondo, Luanda, Angola
Instrument Technician (Operation & Maintenance)
SBM Offshore
Project Site: CHEVRON Exploration Ltd., Campos Basin- FPSO Frade, Vitoria, Brazil October 2016 to
January 2018
February 2015 to
July 2015
March 2011 to
December 2014
July 2008 to
June 2010
Reported to Instrument Supervisor
Responsible in the overall day-to-day maintenance, repair and operation of the GE MS5002C Gas Turbine, 32.6MW and GE Frame 5 Gas Turbine, 42MW Performed daily routine activities such as preventive maintenance tasks Liaised with other maintenance and production personnel to ensure all work were coordinated and within production considerations
Reviewed the quality of information in the maintenance database such that the information contained was technically valid, accurate and up to date Reported to Commissioning Engineer and Supervisor
Reviewed/validated E/I drawings and documents of contractors prior to approval Responsible in processing and drilling instrumentation pre-commissioning, commissioning and start-up
Assisted Vendors in performing loop checking of field instrumentation in Rolls Royce vendor package and in the modification of cabinet wiring on Low Voltage room in Switchgear and Instrumentation Vendor package Ensured that the instrument and control content of the dossiers were accurate and complete before they were accepted from construction and before they were submitted to operations department
Reported to Commissioning Instrument Engineer
Responsible in the pre-commissioning, commissioning and start-up of the Alstom Gas Turbine
Performed bench calibration of control valve, shutdown valve and field instrumentation as well as loop checking from field switches, MCC dry contacts to PLC marshaling cabinets
Reported to Project Supervisor
Tracked down accomplished instrumentation works activity especially the punch list items
Conducted mechanical completion activities signed and witnessed by KIO Engineering Department
Reported to E/I Supervisor
Responsible in the execution and installation of field instrumentation prior to pre- com, commissioning and start up
Installed fire and gas system according to plant specification Responsible in cable tray installation, conduitting, glanding and termination Instrument Technician (Operation and Maintenance)
Wood Group
Project Site: Marathon E.G. Production Ltd., Malabo, Equatorial Guinea Instrument Commissioning Technician
J Ray McDermott
Project Site: Azerbaijan International Oil Company, ACG Onshore/Offshore Facility Project, Baku, Azerbaijan
Instrument Commissioning Technician
TCC Exxon Mobil
Project Site: Chad/Cameroon Exploration Project, Chad, Africa Instrument Commissioning Technician
Saipem Snamprogetti S.p.A
Project Site: Karachaganak Mainworks Contract, KIO Expansion Project, West Kazakhstan Region, Republic of Kazakhstan
E & I Commissioning Technician
ABB Soimi SpA
Project Site: Shurtan Gas Chemical Complex, Shurtan, Republic of Uzbekistan September 2005 to
May 2008
December 2003 to
July 2005
March 2003 to
August 2003
March 2002 to
December 2002
August 2000 to
March 2001
Permit Holder
Darwin LNG Training Center, Darwin, Australia
Basic Offshore Safety Induction and Emergency Training Consolidated Training Capipisa, Cavite, Philippines Explosion Prevention Basics for Explosive Atmospheres Personnel Explosion Prevention Services (EXPLOLABS), Pretoria, South Africa SS2100 Moisture Analyzer
Laser Analytical (Pty) Ltd., Luanda, Angola
Proficiency in Survival Craft and Rescue Boat
Consolidated Training Systems, Inc., Manila, Philippines General Tanker Familiarization
Consolidated Training Systems, Inc., Manila, Philippines Shore-Based and Advanced Training in Firefighting & Helicopter Underwater Escape Training Consolidated Training Systems, Inc., Manila, Philippines Basic Safety Training (Personal Survival Techniques, Fire Prevention and Fire Fighting, Elementary First Aid, Personal Safety and Social Responsibility) Philippine Nautical Training Institute, Manila, Philippines Basic Offshore Safety Induction and Emergency Training (BOSIET) Baku, Azerbaijan
Calibration of Process Instrumentation
MERALCO Foundation Institute, Manila, Philippines
CERTIFICATION & TRAININGS
April 2015
February 2015
October 2011
July 2011
March 2009
February 2009
September 2008
June to July 2008
October 2003
February 2003
February 1995 to
January 1998
May 1990 to
December 1994
Reported to E/I Foreman
Responsible in the execution and installation of work activities and system commissioning, installation of field instrument, glanding and termination of cable trays, including electrical conduiting
Performed work in MCC annunciator panels and KO2 and KO5 Compressor panels Reported to electrical foreman
Responsible in the execution of construction work activities such as conduiting, cable tray installation, pulling of cables and termination Industrial Electrician / Instrument Fitter
Mohammad Al-Mojil Group (MMG)
Project Site: Yanbu Petrochemical Company (YANPET), Phase 4 Expansion Project, Mohammad Al- Mojil Group, Yanbu, K.S.A.
Industrial Electrician
AGAP Arabia Ltd.
Project Site: Shedgum Gas Plant HP DGA Project, Abqaiq, Eastern Province, KSA EDUCATIONAL BACKGROUND
1983 to 1986
1978 to 1982
Bachelor of Science in Electrical Engineering (Undergraduate) Technological Institute of the Philippines (TIP), Manila, Philippines High School Diploma
San Vicente Parochial School, San Vicente, Camarines Norte, Philippines
Contact this candidate