RON YEE adzaxn@r.postjobfree.com 909-***-****

BACKGROUND: 35 years of diverse experience and full control of documentation from concept through to completion of production release drawings. Develop electrical and electronic devices for use in aviation, missilery and astronautic installations. Design packaging and installation to Military specification or commercial standards and Tool Design for flight/ Ground Support Equip, Fuselage and wing design (composite & solid surfacing), Heavy duty ground vehicle support. Analyze product and equipment specifications and perform requirements to conceive practical designs consult and interface with customer representatives, product planning, and other departments to resolve design criteria.

Systems Used: PRO/E 14 thru WF 5(CREO 4.0) over 25k hours, PDM, Wind-chill, Agile, Product View,

(Top Down Modeling, Surfacing)

PROFESSIONAL EXPERIENCES:

RANDTRON ANTENNA SYS. L3 TECH. (ANT. DIV.) MENLO PARK, CA. 09/16–PRESENT (FTE DIRECT)

Manufacturing Engineer, Design, assembles and setup for production shipments B2 small antennas.

BAE SYSTEMS, (ARMORED VEHICLES DIVISION) SAN JOSE, CA 10/15–05/16 (CONTRACT)

Mechanical Designer

Design support for ACV (AMPHIBIOUS COMBAT VEHICLE) Vehicles related to structural & elect. Comp. mtg.

RANDTRON ANTENNA SYS. L3 COMM. (ANT. DIV.) MENLO PARK, CA. 02/15–07/15 (CONTRACT)

Manufacture Engineer, Design equip. to assemble for production of antennas PROE WF4

THERMOFISHER SCIENTIFIC, SAN JOSE, CA. 08/14–10/14(CONTRACT)

Mechanical Designer, Medical Devices, create models and drawings to ASME STDs PROE CREO 2.0

RANDTRON ANTENNA SYS. L3 COMM. (ANT. DIV.) MENLO PARK, CA. 10/13–08/14(CONTRACT)

Mechanical Design Engineer, Antenna Test fixture design for the B2 bomber, (solid surfacing design) PROE WF4

GENERAL ATOMICS, (AERONAUTICS DIVISION) SAN DIEGO, CA. 09/12–09/13(CONTR)

Mechanical Design Engineer

Engineering design 3D modeling bulkheads for aircraft composite structures (composite surfacing) support for PREDATOR drones, Key creator, PROE WF4 and CREO 2.0

CYMER CORP., (OPTICS DIVISION) SAN DIEGO, CA. 07/11-07/12(CONTR)

Mechanical Design Drafter

Engineering design and drafting support for laser light optical mounts, PROE WF5 (CREO)

ITT INDUSTRIAL, (GOULD’s PUMP DIVISION) CITY OF INDUSTRY, CA 03/10-05/11(CONTR)

Mechanical Design Drafter

Converting hand sketch dwgs into PROE WF4 to models & drawings Vertical pumps such as suction bells, bowls, impellers, shafts etc.

BAE SYSTEMS, (ARMORED VEHICLES DIVISION) SAN JOSE, CA 03/07–09/09(CONTR)

Mechanical Designer

Design support for MRAP (Mine Resistant Ambush Protected)/SOCOM, AUV vehicles related to structural, external/internal elect. Cable design, component placement and RWS (remote weapon station) BRONZE AWARD for design on Mine Blast Seats

NORTHROP GRUMMAN, (AERONAUTICS DIV), RANCHO BERNARDO, CA 10/06–03/07(CONTR)

Mechanical Designer

Design ground support equipment for the UNMANNED AERIAL VEHICLE,GLOBALHAWK

BAE SYSTEMS, (ARMORED VEHICLES DIVISION) SAN JOSE, CA 02/06–10/06(CONTR)

Mechanical Designer

Design hard seat for the (CCVS) Common Combat Vehicle System on the (FCS) Future Combat System Program, using Pro E WF3

JONATHAN ENGINEER CORP, (RACK & PANEL), IRVINE CA 03/05–12/05(CONTR)

Mechanical Designer

Created Hand sketch drawings and converted them into ProE2001, models and ultimately ProE dwgs. Responsible for Assy. Dwgs and Slide Guides. ProE 2001, and AUTOCAD 2004.

LAWRENCE LIVERMORE NAT. LABS, (OPTICS DIV.) LIVERMORE, CA. 06/01–03/05(CONTR)

Sr. Electrical/Mechanical Designer

Performed optical electrical and mechanical design on the switchyard bean path, PDS title II, and FOS program.

Responsible for LRU packaging, interface cabling, wiring, optical mounts, Hydraulics/Pneumatic and tables. CAD System used, ProE2001 and Pro intralink v 3.2)

MATSUSHITA AVIONICS SYS, (AERONAUTICS DIV.), LAKE FOREST, CA 08/00–06/01(CONTR)

Sr. Staff Engineer

Responsible for the design of the Seat Electronics Box used for the wide body and narrow body Boeing Jets for the "In-Flight Entertainment System." CAD System used Pro-E 2000i and Pro-E 2000i2

SAFETRAN System Corporation, (RAILROAD SAFETY) Rancho Cucamonga, CA 02/00-08/00(CONTR)

Electro-Mechanical Designer

Responsible for the design of railroad override switches, upgrades on High Voltage Units, LRU’s, and cable harness design. (CAD System used Auto-Cad 2000I and Pro-E2000)

RADCAL Corporation, (MEDICAL EQUIPMENT DEVICES) Monrovia, CA 07/99-02/00(CONTR)

Electro-Mechanical Designer

Responsible for redesigning and updating new radiation detector monitors equip. radiation detectors.

(CAD System used AUTO-CAD 14, 2000 and PROE 18)

Rockwell Collins International, (AERONAUTICS DIV.) Pomona, CA 06/97–07/99(CONTR)

Electro-Mechanical Designer

Performed electro-mechanical design work for electronic packaging used for in-flight entertainment and cable installations. Project participation, In-flight Entertainment and Gaming System on the Shun Tak program to include on sight survey and installations performed in Hong Kong and Taiwan

(Cad system used Anvil 5k and Pro E 18)

American Professionals Welding, (STRUCTURAL STEEL) Los Angeles, CA 12/92–06/97(CONTR)

Contract Structural Steel Designer

Designed structural steel layouts acquired through contracted work from Wing Steel Services

(Cad system used was Auto-Cad R13, Pro-e 14)

Hughes Missile Group, (COMM. RADAR DIVISION) Canoga Park, CA 06/90–12/92(CONTR)

Senior Design Engineer

Specialist Design of Audio/Video LRU's and cable design.

(Cad system used Auto-Cad)

Hughes Aircraft, (COMMUNICATION DIVISION) El Segundo, CA 10/83–06/90(CONTR)

Senior Engineer Development Specialist

Design power converter box for the Defense Electronics Control (DEL) program:

Mechanical Designer

Flight/Ground Support Equipment Division Developed and designed A/D simulator.

Senior Engineer Specialist Design cable installations for multi-aerospace programs

Gulton Industries, (POWER SUPPLY DIVISION) Hawthorne, CA 01/81–04/83(CONTR)

Senior Lead Designer

Design multi-power supply systems

EL CAMINO COLLEGE, TORRANCE, CA

ELECTRICAL MECHANICAL PACKAGING INSTRUCTOR

Instructor for 40+ students in (ELECTRICAL/MECHANICAL PACKAGING DESIGN) course for aerospace industries at EL Camino College

CERTIFICATE OF AWARDS

Certificate of Completion in Geometric Tolerance Applications and Stacks 2008

Bronze Award 2008 for the Mine Blast Seats engineering designs from BAE Systems

Received the NIF Directorate Performance Award, PDS Title II for optics design

Livermore National Labs (2003) Received 2 exceeding expectation awards

TRAVEL: Hong Kong, China, Taipei, Taiwan

EDUCATION: Completed the following certified course

COMPUTER AIDED DESIGN (Auto Cad), El Camino College, Torrance, CA

Basic CADAM, Hughes Aircraft, El Segundo, California

SEMICONDUCTOR, SP-50, Foothill College, Los Altos Hills, California

Contact this candidate