SA’ID JUDEH
Vehicle Mobility Test Engineer, Car Test Engineer,
Mobile Device Modem and Network Test Engineer Phone: 562-***-****
Radio Frequency Engineering Profession, IT Email: adza3f@r.postjobfree.com
Cyber Security Analyst, Site Survey Engineer LinkedIn: Sa’id Judeh
OBJECTIVE
To advance my career utilizing Leadership Skills and Engineering Experience in Vehicle Mobility Testing, Vehicle Ecall Testing,Car Testing, Radio Frequency, Site Survey, and Cyber Security.
Languages: Bilingual English and Arabic
With a rapidly emerging consumer base, potential trade prospects, and profitable business partners in the area of communication and technology, countries in the Arab region represent a great opportunity for businesses looking to globally expand both in-person and online so I am flexible and open to opportunities outside of my home base.
Technical Skills
1.Good knowledge of 3G,4G,5G, LTE/VoLTE, UMTS, GSM, EVDO, WCDMA, CDMA.
2.Analyzed the post optimization drive test LTE data for finding the result of pre-optimization work and notifying the weak spot and solution to the problem for the assigned site or cluster.
3.Skilled in analyzing the KPI’s (key performance indicators) traffic statistics and monitoring the network and troubleshooting on daily basis.
4.Hands-on in analyzing the stats of the network on cell and cluster level, such as call success rate, handover success rate, RF utilization, RF loss rate etc.
5.Skilled in WCDMA, LTE, CDMA and GSM
6.Commissioning, and troubleshooting /optimization for indoor & outdoor DAS Crown Castle.
7.DAS integration, optimization and handover
8.Prelaunch tuning, Post launch network improvement for all carriers: T-Mobile, Sprint, Verizon, and AT&T, from San Diego to Santa Barbara
9.New site build roll out, and performance improvement
10.Coordinator for post launch RF optimization
11.Trouble shooting UMTS, CDMA & LTE networks
12.Monitor network performance improvements for all carriers
13.RF optimization expert on Ericsson LTE & UMTS equipment
14.Working with Corning equipment and troubleshooting
15.Working with SC450 system for radio and ADRF equipment.
16.CEH Certified Ethical Hacker
17.CompTIA A+
18.CompTIA Security+
19.CompTIA Network+
20.CCNA Routing and Switching
21.CISSP Certified Information Systems Security Professional
PROFESSIONAL EXPERIENCE
BTI SOLUTIONS 11/22-01/23
Mobile Device Modem and Network Test Engineer
Essential Functions:
Verify stability and portability of networks and software
Communicate project information through technical reports
Perform ongoing hardware and software maintenance operations, including installing or upgrading hardware or software
Provide technical guidance or support for the development or troubleshooting of systems
Work on field testing on 3GPP standards based on cellular system such as GSM, EDGE, WCDMA, HSPA, LTE and 5G. The testing conducts various types of mobility and stationary RF, Data and Software test cases in the field and lab of 5G, LTE, WCDMA, UMTS, GSM or any related with network service
Research, test, monitor or verify proper functioning of software patches
Analyze and determine issues; check the similar/same issue history, design test plan (location, models, basic parameters, considerations, etc.), field test and/or lab test, set test environment and parameters regarding network circumstance
Capture all the requested and required logs and analyzing them; determine what the log shows, confirm whether the issue is cleared or remained, professional report, and communicate with R&D or/and QA team
Perform testing and engineering services in both stationery and mobility conditions as needed
May require to support carrier lab testing by project needs and other duties as assigned
May require weekend/holiday work depending on project
Must be flexible and able to work extended hours as needed to support testing and client needs.
Travel up to 30% to 50% per project needs and requirements.
PORSCHE/AMEC Consulting L.L.C 11/20-09/22
Vehicle Mobility Test Engineer, Ecall Testing Car Test Engineer
1.Plan and execute vehicle level dynamic test activities per test plans developed in collaboration with key internal stakeholders and external resources
2.Collaborate with simulation and functional teams to validate performance of components, of subsystems, as well as of the complete vehicle
3.Be responsible to instrument vehicles with the necessary sensors to collect data for efficiency and performance while receiving assistance from the software and hardware teams
4.Be responsible for retrieving, storing and sharing of logged data from tests with different teams
5.Schedule test tracks and dynamometer facilities and prioritize use of resources to meet tight, changing deadlines
6.Work with the homologation team to understand the requirements of the tests used in official test procedures
7.Run vehicle test procedures using dynamometer and collect and share data for analysis
8.Participate in design reviews, provide input and engineering analysis to development teams
9.Conduct benchmarking with competitive vehicles
10.Work efficiently within a multidisciplinary cooperative and innovative environment, including directly cooperating with hardware, software, and testing teams
WiLine Networks, INC 10/19-3/20
Site Survey Engineer
1.Schedule survey appointments
2.Travel to job sites in a timely and responsible fashion
3.Honor all scheduling commitments and communicate any delays
4.Maintaining database and job tickets daily or as new information becomes available
5.Document field notes and take photos from job sites capturing all data required as per company requirements
6.Compile data collected from field surveys and create building diagrams for installation plans as needed to support new customer or network builds
Connectivity Wireless, Atlanta, GA 12/17-12/18
RF Specialist Engineer
1.Hands-on experience with RF/electronic test equipment, multimeters, power meters, RF generators, network analyzer, spectrum analyzer, and hand-held RF frequent measurements
2.Working with Corning equipment, JMA Wireless Teko, Commscope.
3.Check the coverage and capacity requirements for voice and data, and plan sites in areas where needed Collected and Post-processed CDMA, and 3g, 4g, 5g LTE drive test data.
·Use drive data reports to spot problem areas and recommend fixes. Insure that network capacity solutions are designed and optimized efficiently as per standard for both voice and data services.
5.Analyze and improve network’s capacity and coverage
6.Monitoring and managing the reliability of the indoor and outdoor DAS system across sixteen locations state wide
7.Ensuring all incoming tickets from different sites are addressed, corrected and closed
8.Monitoring all technical issues including reading schematics, troubleshooting to components level, fiber issues, Antennas, remotes, adding new coverage, and checking performance
9.Checking daily performance of all the DAS systems for all the sites
10.Conducting preventative maintenance schedule annually for every site followed by a detailed health report
11.Familiar with ISO9001 and AS9100
12.Experienced with ADRF radio SC450 equipment and 911
NextG/Crown Castle, Irvine, CA 11/06-4/17
HUB Engineer/Application Engineer/Testing Engineer/ RF Technician II
1.Over 11 years with DAS: integration, commission, RAN & DAS tuning and optimization
2.Experience with ASG/AT&T in building, outdoor DAS coverage solution, commissioning, and DAS optimization
3.Experience and certify with DAS equipment (Tyco, Mobile Access, Commscope)
4.Experience in Integration, and optimization LTE & UMTS technology, network optimization including (capacity management, Radio coverage shaping, increase cell throughput, service accessibility, Layer and Load management, parameters tuning)
5.Process data using Mapinfo, ChamelCW, Link Master LML/LMA, WindCatcher+/Xceed Technologies, ACT Analyzer, Atoll, Actix, Google Earth Pro, iBwave solution, and Viavi Solution,
1. Analyzed the post optimization drive test LTE data for finding the result of pre-optimization work and notifying the weak spot and solution to the problem for the assigned site or cluster.
2.Skilled in analyzing the KPI’s (key performance indicators) traffic statistics and monitoring the network and troubleshooting on daily basis.
3.Hands-on in analyzing the stats of the network on cell and cluster level, such as call success rate, handover success rate, RF utilization, RF loss rate etc.
6.Direct interact with Operators, Engineers and Managers (T-Mobile, ATT, VZW, SPRINT) to provide Design proposal, collect customer requirements, and technical advice
7.Pre and post launch tuning, troubleshooting, and optimization for RAN and indoor/outdoor DAS
8.RBS and DAS equipment faults diagnosis, alarms analysis, and perform field troubleshooting on RBS, DAS and antenna system
9.Collect and process data pre and post site launch
10.Assisting with the selection of the sites
11.Performing CW Testing, and processing data to repot accurate selection
Sprint PCS, Irvine, CA 04/00-10/06
Optimization Specialist (contractor)
1.Collect and process RF field data to help bring new sites on-air
2.Collect and process systems baseline data to help troubleshoot drop-call and block-call problem areas
3.Perform in-building coverage service analysis
4.Interacted directly RF Engineers, Technicians and management
5.Utilized Engineering tools to monitor, evaluate, record, and report major outages. Experience with mapping programs (MapInfo, MS Streets and Trips, etc.)
6.Collected CW measurements in support of new site candidate evaluation
7.Set-up and operate a CW transmitter and receiver including configuring antennas, cables, connectors and drive a specified data collection route
8.Verified site contacts and plans are in place for site testing. Post process and analyze CW measurement date
9.Perform site audits. Accurately determine antenna azimuths, down-tilts, antenna types
10.Determine if new sites are functioning properly during the initial baseline process and whether or not the new sites should remain on air and get handed over to RF Engineers for further RF optimization and traffic data analysis
1.Performed production testing for CW and RF characterization of specific devices
2.Aligned, tested, and troubleshoot RF/Microwave receivers, converters and switches
3.Verified Antenna Placement to identify proper operation for wireless communication
4.Assisted with Site Construction Management
5.Evaluated the job site to ensure proper signaling and communication between receivers and transmitters
6.Familiar with current and next generation multiple access technologies
7.Maintained test records, calibration data, and documentation required by production test procedures
EDUCATION
Khawarizmi Intternational Academy Jordan-Amman 2/1992
Bachelor of Science, Business Administration
Integrated Digital Technologies (IDT) 9/2019
Cyber Security Analyst, and IT professional.
CERTIFICATION
1.Corning Equipment, Corning Platform, and Corning Platform 1
2.ADRF Equipment, 911 Emergency
3.Crown Castle U.S. Corporate Policies and Guidelines agreement
4.AISP - Protected Bird Guidance Refresher
5.Safety - Personal Protective Equipment - Part 2 - Head Protection
6.Safety - Personal Protective Equipment - Part 3 - Eye and Face Protection
7.Safety - Hazard Communication V3
8.Safety - Hazard Perception Evaluation – USA Edition
9.Safety - Battery Safety for Telecommunications
10.Safety - Lockout Tag Out
11.Safety - Radio Frequency Training
12.SCFS CCI Sites Release 2016.2.1 Implementation Review
13.PIM Testing
14.CommScope Certification in ND6444 ION-B, ION-M and IOU-U Operations
15.TEKO DAS Platform Overview
16.TEKO DAS Advanced Configuration and Architectural Design
17.CEH Certified Ethical Hacker
18.CompTIA A+
19.CompTIA Security+
20.CompTIA Network+
21.CCNA Routing and Switching
22.CISSP Certified Information Systems Security Professional