Front End Equipment Operator
Resume:
TERRELL A. **** Carrington Drive Hephzibah GA ****5 678--699-6545
HURST ************@*****.***
Objective
My objective is to obtain a position within a general field that is meaningful and challenging;
which also contributes to my daily knowledge and growth as an Assistant to professionals.
I am looking for a position in the general environment that allows me to contribute my service
as a professional (that also allows me to gain experience and growth as a professional).
Education
General Education Development
Journeyman Rodbuster
Commercial Driver License
Professional Experience
USA Truck
Commercial Driver September 2022-July 2023
● Follow and maintain loading protocols, using chains and binders to secure cargo and
re-checking their stability throughout trips
● Inspect trailers before and after loading, paying attention to status of air lines and jack positions
and adjusting them as necessary
● Visit weigh stations before and after packing to ensure that loads meet state safety regulations,
making alterations to loads when required by law
● Contribute to company data by honestly recording times of delivery and hours worked
● Assist in unloading cargo when delivery sites are understaffed, maintaining product quality
throughout conveyance
● Adhere to traffic safety regulations at all times, exercise caution in treacherous circumstances
and report unsafe vehicle or road conditions to supervisors and highway authorities
● Use GPS to stay informed of route information, and communicate with supervisors and
colleagues using CB radio and cab computer
Pam Transport
Commercial Driver June 2022-September 2022
● Perform safety checks of brakes, steering column, lights and mirrors prior to each leg of journey to
ensure road readiness
● Follow and maintain loading protocols, using chains and binders to secure cargo and re-checking their
stability throughout trips
● Inspect trailers before and after loading, paying attention to status of air lines and jack positions and
adjusting them as necessary
● Visit weigh stations before and after packing to ensure that loads meet state safety regulations,
making alterations to loads when required by law
● Contribute to company data by honestly recording times of delivery and hours worked
● Assist in unloading cargo when delivery sites are understaffed, maintaining product quality
throughout conveyance
● Adhere to traffic safety regulations at all times, exercise caution in treacherous circumstances
and report unsafe vehicle or road conditions to supervisors and highway authorities
● Use GPS to stay informed of route information, and communicate with supervisors and
colleagues using CB radio and cab computer
Barton Malow, Detroit
Rodbuster March 2021-February 2022
Steel Rodbuster October 2020-February 2021
● Determines number, size, shape and locations of reinforcing rods from blueprints, sketches or oral
instructions.
● Positions and secures steel bars in concrete forms to reinforce concrete.
● Selects and places rod in forms; spacing and fastening them together using wire and pliers.
● Cut bars to required lengths, using hacksaw, bar cutters or acetylene torch.
● Bend steel rods with hand tools or rod bending machines.
● Reinforced concrete with wire mesh.
● May reinforce concrete with wire mesh. May weld reinforcing bars together, using arc-welding equipment.
● Ensures that all reinforcing material is in its proper position, so it receives its intended structural load.
● Loads, transports, unloads material, tools, equipment and supplies.
● May assist in lifting, positioning and securing of material and work pieces during installation.
● May perform minor maintenance or cleaning activities of tools and equipment.
● Responsible for observing and complying with all safety and project rules. Performs other duties as
required
● Work within precise limits or standards of accuracy.
● Rate information us' standards which can be measured or checked.
● Compare and see differences in the size, shape and forms of lines, figures and objects.
● Look at blueprints, drawings or pictures and understand how they would look as solid objects with height,
width or depth.
● Apply basic mathematical skills.
● Follow oral and written directions.
Y12, Tennessee
Steel Rodbuster October 2020-February 2021
● Determines number, size, shape and locations of reinforcing rods from blueprints, sketches or oral
instructions.
● Positions and secures steel bars in concrete forms to reinforce concrete.
● Selects and places rod in forms; spacing and fastening them together using wire and pliers.
● Cut bars to required lengths, using hacksaw, bar cutters or acetylene torch.
● Bend steel rods with hand tools or rod bending machines.
● Reinforced concrete with wire mesh.
● May reinforce concrete with wire mesh. May weld reinforcing bars together, using arc-welding equipment.
● Ensures that all reinforcing material is in its proper position, so it receives its intended structural load.
● Loads, transports, unloads material, tools, equipment and supplies.
● May assist in lifting, positioning and securing of material and work pieces during installation.
● May perform minor maintenance or cleaning activities of tools and equipment.
● Responsible for observing and complying with all safety and project rules. Performs other duties as
required
● Work within precise limits or standards of accuracy.
● Rate information us' standards which can be measured or checked.
● Compare and see differences in the size, shape and forms of lines, figures and objects.
● Look at blueprints, drawings or pictures and understand how they would look as solid objects with height,
width or depth.
● Apply basic mathematical skills.
● Follow oral and written directions.
Plant Vogtle, Georgia
Steel Rodbuster July 2019-April 2020
● Determines number, size, shape and locations of reinforcing rods from blueprints, sketches or oral
instructions.
● Positions and secures steel bars in concrete forms to reinforce concrete.
● Selects and places rod in forms; spacing and fastening them together using wire and pliers.
● Cut bars to required lengths, using hacksaw, bar cutters or acetylene torch.
● Bend steel rods with hand tools or rod bending machines.
● Reinforced concrete with wire mesh.
● May reinforce concrete with wire mesh. May weld reinforcing bars together, using arc-welding equipment.
● Ensures that all reinforcing material is in its proper position, so it receives its intended structural load.
● Loads, transports, unloads material, tools, equipment and supplies.
● May assist in lifting, positioning and securing of material and work pieces during installation.
● May perform minor maintenance or cleaning activities of tools and equipment.
● Responsible for observing and complying with all safety and project rules. Performs other duties as
required
● Work within precise limits or standards of accuracy.
● Rate information us' standards which can be measured or checked.
● Compare and see differences in the size, shape and forms of lines, figures and objects.
● Look at blueprints, drawings or pictures and understand how they would look as solid objects with height,
width or depth.
● Apply basic mathematical skills.
● Follow oral and written directions.
DayStar Infrastructure & Construction
Rodbuster January 2019-July 2019
● Assist tradesmen and machine operators in construction projects
● Erect and break up scaffolding, ramps etc. with attention to safety
● Unload and carry materials at construction sites
● Use equipment to break old forms and structures
● Use explosives to demolish structures according to instructions
● Prepare and apply construction materials to build structures or fill gaps (e.g cement)
● Smooth and level new concrete or other materials
● Clean out site from debris and discarded material
● Place traffic signals where appropriate
● Provide support to successful completion of construction and engineering work
● Operate all heavy equipment like cranes, earth movers, bulldozers, front-end loaders, and other related
equipment.
● Operate the equipment in the right direction and angles to prevent accidents and damage of property.
● Ensure and manage the machines or equipment in a safe and secure way.
● Perform periodical safety, maintenance or servicing checks to ensure proper functioning of the equipment.
● Perform minor repair works during functioning problems
● Inform and advise the management or repairmen for major repairs or maintenance
● Drive and control the equipment
● Perform road work, excavation work, lifting work, etc.
Rebar Erection Inc.
Rodbuster November 2018 -January 2019
● Cut rods to required lengths, using metal shears, hacksaws, bar cutters, or acetylene torches.
Harry Davidson Construction, North Dakota
Rodbuster September 2018-November 2018
● Cut rods to required lengths, using metal shears, hacksaws, bar cutters, or acetylene torches.
● Determine quantities, sizes, shapes, and locations of reinforcing rods from blueprints, sketches, or oral
instructions.
● Position and secure steel bars, rods, cables, or mesh in concrete forms, using fasteners, rod-bending
machines, blowtorches, or hand tools.
● Space and fasten together rods in forms according to blueprints, using wire and pliers.
● Place blocks under rebar to hold the bars off the deck when reinforcing floors.
● Cut and fit wire mesh or fabric, using hooked rods, and position fabric or mesh in concrete to reinforce
concrete.
● Bend steel rods with hand tools or rod-bending machines and weld them with arc-welding equipment
Daystar Infrastructure & Construction, Georgia
Renovation Worker, Heavy Equipment Operator, Concrete Finisher November 2017-September 2018
● Assist tradesmen and machine operators in construction projects
● Erect and break up scaffolding, ramps etc. with attention to safety
● Unload and carry materials at construction sites
● Use equipment to break old forms and structures
● Use explosives to demolish structures according to instructions
● Prepare and apply construction materials to build structures or fill gaps (e.g cement)
● Smooth and level new concrete or other materials
● Clean out site from debris and discarded material
● Place traffic signals where appropriate
● Provide support to successful completion of construction and engineering work
● Operate all heavy equipment like cranes, earth movers, bulldozers, front-end loaders, and other related
equipment.
● Operate the equipment in the right direction and angles to prevent accidents and damage of property.
● Ensure and manage the machines or equipment in a safe and secure way.
● Perform periodical safety, maintenance or servicing checks to ensure proper functioning of the equipment.
● Perform minor repair works during functioning problems
● Inform and advise the management or repairmen for major repairs or maintenance
● Drive and control the equipment
● Perform road work, excavation work, lifting work, etc.
● Respond to signals and directions by the staff and work in coordination with them
● Maintain proper coordination and cooperation with the road and transport system while driving/working,
so that the normal activities are not disrupted.
● Operate the equipment manually and also through the use of electronic or technical methods of operation.
● Work in adherence to safe practices, procedures, work site or traffic laws.
● Maintain a database in the computer to record daily activities, inventory charts, etc.
● Report to the senior operation manager
● Perform other duties, as and when assigned
● Smooth out concrete in segments to ensure the concrete poured is level.
● Fill roadways, driveways, sidewalks, bridges, homes, and parking lots.
● Arrange the concrete forms.
● Spread concrete.
● Prepare the surface with a hammer and choose.
● Rub cement in with sponge-rubber float or burlap.
● Level it using special blades, making sure all lumps and bubbles are smoothed over.
● Use wood or plastic forms to shape the concrete and hold it until it is set.
● Smooth high spots and fill depressions.
● Make concrete beams, columns, and panels.
● Wash away excess concrete.
● Finish corners by hand.
● Apply latex and epoxy to floors.
● Use machines that vibrate concrete to fill air pockets.
● Use groovers and hand trowels to spread concrete.
● Halt concrete pouring if weather looks bad.
● Prepare the base.
● Cut pavers.
● Install masonry according to specifications.
● Pour sand in as filler.
● Use chemical additives to speed up the drying process if necessary.
Plant Vogtle, Georgia
Steel Rodbuster January 2015-November 2017
● Determines number, size, shape and locations of reinforcing rods from blueprints, sketches or oral
instructions.
● Positions and secures steel bars in concrete forms to reinforce concrete.
● Selects and places rod in forms; spacing and fastening them together using wire and pliers.
● Cut bars to required lengths, using hacksaw, bar cutters or acetylene torch.
● Bend steel rods with hand tools or rod bending machines.
● Reinforced concrete with wire mesh.
● May reinforce concrete with wire mesh. May weld reinforcing bars together, using arc-welding equipment.
● Ensures that all reinforcing material is in its proper position, so it receives its intended structural load.
● Loads, transports, unloads material, tools, equipment and supplies.
● May assist in lifting, positioning and securing of material and work pieces during installation.
● May perform minor maintenance or cleaning activities of tools and equipment.
● Responsible for observing and complying with all safety and project rules. Performs other duties as
required
● Work within precise limits or standards of accuracy.
● Rate information us' standards which can be measured or checked.
● Compare and see differences in the size, shape and forms of lines, figures and objects.
● Look at blueprints, drawings or pictures and understand how they would look as solid objects with height,
width or depth.
● Apply basic mathematical skills.
● Follow oral and written directions.
Daystar Infrastructure Construction, Georgia
Renovation Worker, Heavy Equipment Operator, Concrete Finisher January 2002-January 2015
● Assist tradesmen and machine operators in construction projects
● Erect and break up scaffolding, ramps etc. with attention to safety
● Unload and carry materials at construction sites
● Use equipment to break old forms and structures
● Use explosives to demolish structures according to instructions
● Prepare and apply construction materials to build structures or fill gaps (e.g cement)
● Smooth and level new concrete or other materials
● Clean out site from debris and discarded material
● Place traffic signals where appropriate
● Provide support to successful completion of construction and engineering work
● Operate all heavy equipment like cranes, earth movers, bulldozers, front-end loaders, and other related
equipment.
● Operate the equipment in the right direction and angles to prevent accidents and damage of property.
● Ensure and manage the machines or equipment in a safe and secure way.
● Perform periodical safety, maintenance or servicing checks to ensure proper functioning of the equipment.
● Perform minor repair works during functioning problems
● Inform and advise the management or repairmen for major repairs or maintenance
● Drive and control the equipment
● Perform road work, excavation work, lifting work, etc.
● Respond to signals and directions by the staff and work in coordination with them
● Maintain proper coordination and cooperation with the road and transport system while driving/working,
so that the normal activities are not disrupted.
● Operate the equipment manually and also through the use of electronic or technical methods of operation.
● Work in adherence to safe practices, procedures, work site or traffic laws.
● Maintain a database in the computer to record daily activities, inventory charts, etc.
● Report to the senior operation manager
● Perform other duties, as and when assigned
● Smooth out concrete in segments to ensure the concrete poured is level.
● Fill roadways, driveways, sidewalks, bridges, homes, and parking lots.
● Arrange the concrete forms.
● Spread concrete.
● Prepare the surface with a hammer and choose.
● Rub cement in with sponge-rubber float or burlap.
● Level it using special blades, making sure all lumps and bubbles are smoothed over.
● Use wood or plastic forms to shape the concrete and hold it until it is set.
● Smooth high spots and fill depressions.
● Make concrete beams, columns, and panels.
● Wash away excess concrete.
● Finish corners by hand.
● Apply latex and epoxy to floors.
● Use machines that vibrate concrete to fill air pockets.
● Use groovers and hand trowels to spread concrete.
● Halt concrete pouring if weather looks bad.
● Prepare the base.
● Cut pavers.
● Install masonry according to specifications.
● Pour sand in as filler.
● Use chemical additives to speed up the drying process if necessary.
SKILLS & PROFICIENCIES:
● Proficient with backhoes, excavators, graders, rollers, aerial buckets, skip loaders,, water trucks, dump
trucks,, and sweepers
● Rodburster
● CDL
Reference Available Upon Request
Contact this candidate