WAHEED HAYAT

Testing & commissioning Engineer Electrical

Licensed Reg # Eng. Technologist/Electrical/00490 (National Technology council Pakistan, https://www.ntc-hec.org.pk/)

Licensed Reg # Electrical 719054 (Saudi council of Engineer), https://www.saudieng.sa/

PHONE# +966********* (08 Year Gulf Experience + Pakistan)

E-MAIL: adyh6g@r.postjobfree.com

Permanent/postal Address: Al Khobar Dammam KSA

OBJECTIVE

Electrical Engineer with 9+ years of experience working with companies in the electrical automation industry. Implementation of digital systems was a primary focus. Excellent communication and intrapersonal skills, and possess a wide range of technical skills.

Conference/Seminars

Attend 10th International Conference on Frontiers of Information & Technology, held on December 17/19/2012 at Islamabad, Pakistan

Attend seminar on Broadband Network, Heid on September 20/2012 at CIIT Wah Cantt, Pakistan

Received Appreciation Certificate from STC Saudi Arabia Regarding Three Successful Hajj 1436 to 1438H.

Summary:

About 9 years of experience as an Electrical and control Engineer in Erection, Installation, Pre-commissioning, maintenance, commissioning and development coordination of instruments and control systems in Petrochemicals, Refinery, RO Plant, HVAC Plant, Cement Plant, Water Treatment Plant projects

Design review and implementation for complete Engineering Drawings including Layouts, IFC, As build drawings, RO material approvals for Transformers, Relays, Switchgear, Circuit Breakers, Isolators, CTs, VTs, Control and Protection systems, Power and Control cables, Station Service transformers, RMU, OLTC, Lighting Systems, grounding systems, AC/DC Auxiliary Power Supply, SCADA & SOE systems, Fire Alarm & CCTV systems, HVAC and plumping etc. Project management and material control. Development of single line diagrams, load list, cable schedule and other related design documents.

Designing, Assembling and Repairing of Transformer, RMU,VCB,OCB,SF6,Three-phase Induction Motor, Generator, Control panel, UPS, Rectifiers,DC power system, VFD, Soft Stator, Medium Voltage VSD, Switch mode power supplies, HT controls panels, servo control, Relays control, Temperature control, pressure control, Electro-optical devices and motor control System, level, PH,TDS, Conductivity, Flow sensor

Advise and monitor onsite subcontractors for installation of power Sub Station and Distribution works, UPS, BMS, DDC, DCS, MCC systems and other electrical engineering activities as required.

Synergize with the project commissioning team to ensure that all projects are meticulously commissioned to deliver world class standards of quality to QPM clients

Ensure that all equipment’s used at site are calibrated

Conduct the HV Test of all power cables up to 2000 mm2 as per IEC & Client Standard

Inspection for control panels, protection panels, LLC panels and auxiliary panels.

Inspection for earthing, grounding and grounding mesh.

Excellent written and verbal communication skills, including the ability to communicate solutions effectively to both technical and non-technical audience.

Knowledge of process for wastewater / water treatment and basic process.

Broad Knowledge of Electro-Mechanical Installations of Small and Large Water projects.

Process basic water plant hydraulic and electromechanical Equipment.

Broad knowledge of the Electrical Equipment’s Installation and layout drawings for Water Project (Reservoirs, Penstock, Sedimentation Units, Inlet Valves, Power Stations) and Substations

Advanced water treatment techniques and equipment used in RO Process & chiller plant.

Having the experience to deal for interface issues with Mechanical and Civil Works.

Project Completed

Country

Owner

Project

Saudi Arabia

King Fahad University of Petroleum & Mineral

1.New RO & chiller plant ITP 8 up to 50,000 Cu M / Day,5000 Tons capacity for chiller plant. New Pump Station and Pipeline to Faculty Housing

2.testing commissioning of mv/lv electrical, iBMS/Scada, substation, ro plant dcs & chiller plant, cooling tower

3.ro plant electrical mcc panel/scada/dcs/instrumentation installation & testing commissioning pid of including chiller plant.

4.Dhahran techno valley geo sciences engineering labs project (hv, LV electrical, bms, substation 132/13.8kv, RO PLANT INSTALLATION & testing

5.Water leak detection system for raw water pipe line

Saudi Arabia

Aramco

Aramco Housing

1.Construction New Wastewater Treatment Plant for design capacity of 10,000 m /day.

2.Drinking Water Transmission line (Capacity: 40,000 m /day, Length: 5 km), Including Pumping Station.

3.Wastewater Trunk Line (Capacity: 15000 m /day, Length: 4 km), Including Sewage Pumping

4.Station.

5.Treated Sewage Effluent (TSE)

Transmission Line (Capacity: 25000 m /d, Length: 17 km), Including storage pond and pumping station.

Saudi Arabia

Saudi Telecom company

1.Electromechanical SLA Project of STC Data center Tier 4. Makah Aziziya

2.Electromechanical SLA Project MINA Data centre

PROFESSIONAL EXPERIENCE

Al Yamama group (Kingdom of Saudi Arabia)

Electrical Engineer, (Feb 2023 to till)

END USER: King Fahad University of petroleum & mineral (Projects Department) (DAHARAN KHUBAR)

NABIL ABU NAHAYA & HIS PARTNER (N&P) (Kingdom of Saudi Arabia)

Electrical Engineer (16 JAN 2019 TO Fen 2023)

END USER: Aramco (DAHARAN KHUBAR)

SAEED AL RADAD GROUP (SRACO) (Kingdom of Saudi Arabia)

Electrical Engineer, (01 FEB 2018 to 15 JAN 2019)

END USER: King Fahad University of petroleum & mineral O&M Project (DAHARAN KHUBAR)

SEDER GROUP (Kingdom of Saudi Arabia)

Electrical ENGINEER, (2015 to 2018)

END USER: Saudi telecom company (STC) Data Centers MSTB Project O&M

DESCON Pakistan

Electrical supervisor, (01 FEB 2015 to 10 Sep 2015)

END USER: Water & Power Development Authority

Detailed work description

low voltage & Control system installation, testing & commission

Provide technical direction or support to installation teams during installation, start-up, testing, system commissioning, or performance monitoring.

Visiting the site in order to check the design implementation according to the approved drawings.

Reviewing of drawing technical submittals for pumps, MCC, DDC, DCS, BMS, CCMS, Low voltage and building electrical layouts.

Recording of contractor’s proposals and designs

Implementation and maintain highly advanced network strategies to meet a broad spectrum of business needs as they relate to industrial controls and RO SCADA networks; Specify and procure items such as PLC’s, SCADA, MCC’s, motors, VFD and Instrumentation. Digital Direct Control, Distributed Control system, Graphical interface Module, Data Gathering panel, Motor control center, Variable frequency Drive, LLID System (Schneider, Honeywell, Siemens, Rockwell, ABB,)

Have a experiences in SCADA and Communication Systems related to protection and control

Have experience of working with a range of DCS systems such as ABB 800xa and knowledge of batch standard ISA 88.

Siemens: Simatic S7-200, S7-300,S7-1200 controller, software somatic manager version 6.3.,

Allen Bradley: Micro Logic 1200 series C, SLC 5/03, software RS logic 500.

Have knowledge of Safety Instrumented Systems (SIS), regulatory requirements such as IEC 61511 and alarm management standards such as IEC 62682/ISA 18.2

Panel build supervision, Programming (Siemens & Rockwell Automation, Honeywell, Alerton), installation supervision, testing and commissioning

Process Automation Systems Division is responsible for providing technical support and guidance to client operating organizations and joint ventures facilitating top performance in the field of process automation, instrumentation, plant security and custody measurement applications

Ensuring the sites compliance with the required operating standards such as alarm management (ISA18.2), Safety Instrumented Systems (IEC61511), Cyber security (IEC 62443).

Evaluate, design, and support the most highly technical and complex aspects of industrial controls and SCADA communications, infrastructures and related real time system, under minimal direction.

UPS Schneider 60 to 120 KVA

Inspection for control panels, protection panels, LLC panels and auxiliary panels.

UPS (Socomec): GP, MP, MX) (10 to 2000 KVA ) 53 Units

Have good command on fault troubleshooting Generator control system/ATS & Electromechanically system

Erection, Calibration and Commissioning of several field Instruments like Pressure Transmitters, Flow Transmitters, Level Transmitters, Temperature Transmitters (FF /Non FF type), Various process indicating Gauges and Hook up / Loop Checking and Maintaining the documents and AS-BUILD drawings.

Involved in Commissioning of RO / WTP/ETP plants.

Pneumatics and Field Instruments (P&FI) Pneumatics - ON/OFF Solenoid valves, Control Valve, Actuator.

Installation & Commissioning Medium voltage

Maintenance and installation, testing commissioning of Transformers Earthling Transformers Reactors (Shunt & Series) SVC Equipment’s

Maintenance and installation testing & commissioning of Switch Gears, Circuit Breakers 3 Phase & 1 Phase, Isolators, Earth switches, Line Earth switches, Double Busbar, Single Busbar, 1 Â Breaker System, Busbar Earth Switches,

V.Ts 1ph, 3 Phase Routine Tests, Current Transformers Routine Tests, GIS Bays, 33kv Switch Boards, 13.8kv Switch Boards,

Terminal Compound-OHL Termination, Underground Cables, Cable Termination, Line Traps, Outdoor V.Ts EMVT & CCVTs

I have good knowledge in High Voltage power and commissioning of transmission project and well conversant with all international standards, IEC, IEEE, DIN, SASO ANSI etc.

Inspection and testing of SF6 Gas insulated substations, rated for voltage from 13.8 KV up to 380 KV and switchgear rated for 69/33/13.8/11 kv.2. Inspection and testing of Cables and overhead line transmission equipment such as cables, conductors, surge arresters, terminations and joints, and related accessories.

Power transformer field (up to 600MVA)

Assist in checking all completed design works are as per Scope of Work

To be an expert in testing, installation and commissioning of protection relays for power transformers, switchgears of voltage levels 220kV, 132kV, 66kV, 11kV and 415KV

Proven experience in operating relay configuration tools such as Siemens DIGSI 5, SEL Accelerator, Micom S1, ABB PCM600, etc

Proven experience in transmission substation protection design, settings study, settings calculation, settings grading, producing settings report, CT/VT sizing and CT saturation check

Demonstrated experience in understanding of high voltage substation control schemes and SCADA interfaces associated with protection schemes

Direct experience coordinating protective relays using Electrocon CAPE software

Support in maintenance activities related to application, thorough knowledge of all Substation equipment testing, maintenance, Fault investigation and repair activities

The “Setting preparation” consist in prepare any configuration file (i.e. SET, PSL, MCL) necessary to fulfill the Protections and Control functionalities requested by the customer

Inspection for Installation of 502 MVA power transformer.

Inspection for installation of 50/67 MVA power transformer.

Inspection for installation HV bushing, Post insulator and Surge arrester.

Conduct the HV Test of all power cables up to 2000 mm2 as per IEC & Client Standard

Inspection for control panels, protection panels, LLC panels and auxiliary panels.

Inspection for earthing, grounding and grounding mesh.

IEC 60076 Distribution and Power transformers, IEC 60137 Bushings for alternating voltages above 1000V.

Operation, Control & Maintenance of small hydroelectric power station (200kW)

Visual Routine Inspection of 132kV Over Head Line feeder and outdoor switchyard in various sub stations

Replaced of 132, 66, 33&11 kV outdoor Switching equipment such as LA, CBs, CT’s, Pts, Support insulators & bus bar etc.

Inspection & Maintenance and Repair of EHV cable (XLPE& Oil Filled) Outer Sheath repair, jointing &cable Sealing End terminations.

Conducting hydraulic& electrical tests like RGP, Oil Flow test & HI-pot test before commissioning the 66&132kv Oil filled cable Feeders

Replacement of 132/66 kV, 92 MVA Transformer with same Ratings New Transformer

Repairs of 11kv Cable terminal box and bushing in power& Distribution transformer

Fault location of pilot, Communication and Optic fibers Cable with its Repairs& required tests

HVAC Work description

Working closely with Clint Energy Manager and Building Services Maintenance Manager to ensure that controls systems maximize the energy efficiency of the assets and environments they control and take an active role in developing a condition-based approach to HVAC maintenance.

Ensure timely delivery and implementation of the BMS system design packages and support the review of design packages specific to the controls scope of work by attending design review meetings to provide feedback from a constructability and coordination perspective and ensure BMS system design packages are aligned with issued contract documentation and meet the required quality expectations

Chiller, Carrier,Trane,York,Zamil (AIR cooled,Water cooled) 200 to 5000 ton have well experiences in control algorithm system & Power Substation including Testing commissioning & Designing of HVAC control systems & Electrical Power Monitoring

Have experience in Air handling system/Air balancing/Water balancing,VAV, FCU, Two & Three-way valve calibration

HVAC PLC (Honeywell, Allen Bradley, ABB,Rockwell and Schneider), Danfoss programming, modification and maintenance of input sensors/Transducer including adaptive controls system.

Perform audit on all HVAC system and collect data and perform periodic evaluation and monitor all log books and manage all change processes and resolve all issues.

Manage all data center/Substation/academic applications and operate various centrifugal chillers and install and maintain dehumidification systems and oversee all maintenance activities for various technicians.

Analyze all load programs and perform required calculations on same and manage all electrical requirements for HVAC equipments and recommend improvements.

Detail Engineering:

Preparation, Inspection & Review of Cable tray & Trench route for cable, Area Lighting, Cable Schedule. Engineering and data review of vendor’s drawings and documentation

Inspection & Review of Detail engineering and technical documentation.

Inspection & Review of BOQ for Electrical as per approved for construction drawings

project management work description

Monitoring of Client Standards for Electrical Activities at Project Site.

Experience in developing and managing client relationships

Preparation of Internal Inspection Reports (IIR).

Preparation and Control of Material Inspection Reports (MIR).

Attending RFI raised by Site Management.

Implementation of quality management system (QMS) at site.

Preparation and submission of quality control documents (method of statement, SOP/PTS, )

Ensuring that all works are carried out as per approved drawings and PTS.

Responsible for the implementation of Project Quality Plan for the Electrical Activities and Project Specifications.

Familiar with KPI (key performance indicator), PDCA (plan do check act) & ISO 9001

Supervised the QA Team for accreditation with ISO 9001, 17025, 14001 & OHSAS 18001

Raising Non-Conformance and Surveillance Reports (NCR) for Electrical Activities and Materials on Site.

Monitoring of the implementations of Corrective and Preventive Actions for NCR’s.

Handling and Storing of Electrical Equipments according to Purchase Orders and Delivery Reports.

Prepare daily QA/QC report regarding inspections, Non-conformances and proactive.

Preparing of QA/QC weekly, monthly reports and audit reports with action plan.

Internships;

1. National Transmission and Dispatch Company

Lahore, Punjab, Pakistan – Intern (20/6/2013 – 23/7/2013)

2. Multan Electric Power Company

ACADEMIC QUALIFICATION

Bachelor of Technology Electrical Engineering (Honours) (First Division) From University of Engineering & Technology Peshawar KPK Pakistan

(Session Annual Sep 2010 to Jan 2015)

Three year Diploma of Associate Engineer Electrical Technology (first Division) Board of Technical Education Peshawar KPK Pakistan.

(Session Annual Sep 2007 to May 2010)

Secondary School Certificate from Board of Intermediate and Secondary Education Dara Ismail Khan KPK Pakistan.

(Session Annual 2006 to July 2007)

Subjects/Skills

Studied a vast array of subjects related to Electrical, Power, Electronics and Control engineering. Subjects include Circuit Analysis, Electric Machinery Fundamentals, Network Analysis, Power System Analysis, Signals and Systems, Analogue and Digital Electronics, Data Structures, Stochastic Processes, Microprocessor Systems, Digital Integrated Circuits, Control Systems, Engineering Management, Power System Operation and Control, Power System Protection, High Voltage Engineering, Power Electronics, Renewable Sources of Energy, Computer Networks, Technical Report Writing and Communication Skills.

Experience on a variety of software’s and programming languages including Mat lab, Proteus, Pspice, Xilinx, Kiel, ETAP, Power World Simulator, Prim, Primavera, Microsoft Project, AutoCAD, MSWord, Excel, C and Assembly.

Proficient in assessing data and formulating solutions.

Effective at time management and prioritizing tasks to achieve deadlines.

Strong team working, leadership and communicational skills.

Computer Knowledge:

Matlab MS. Office (Word, Excel, Power Point), Packet tracer, Keil, Snipping tool, Proteus

Personal Information:

1.Father Name : Khizar Hayat

2.Gender : Male

3.Marital Status : Single

4.Date of Birth : 01 April 1990

5.Nic No : 12101-9984612-3

6.Domicile : D.I.Khan ( KPK )

7.Religion : Islam

8.Nationality : Pakistani

Language Skill:

•Urdu, English, Arabic

Reference:

Available on request

Documents

Bachelor Degree 4-year Electrical

3-year Associate Engineering Diploma Electrical

Employs Cards

Contact this candidate