As an I&C Engineer having more than +* yrs. of extensive experience in Construction & Pr-Comm

Oil & Gas, Refineries, Power & Industrial Plants involving Construction, Supervision of all onsite Instrumentation and Electrical work inspection activities.

Looking forward to undertake a challenging role in the field of Electrical and instrumentation with well established & reputed organization, which offers scope for self-development, career advancement and stability where I can utilize my broad training, skills & experience acquired over the past 5 years in relevant field.

Experience in process control & instrumentation. Familiar with various field instrument used in industries, Knowledge about, DCS, and HMI based automation system. Complete

understanding of installation, testing & commissioning of various field instruments like RTD, TC, Flow, Level sensor, pressure sensors, smart Transmitter, digital positioner, control valves, Dampers, solenoid valves, flame Scanner, Igniter, local gauges, electronic switches etc.

SKILLS

Proficient in Computer Microsoft suite and office tools.

Understand the HSE Policy and Permit System.

Able to read and understand Instrument drawing.

ERT (Emergency Rescue Training)

LOTO Training.

Mark-up and As-built drawing.

Walkthrough & Punch list preparation.

Pre-commissioning & Commissioning requirements.

PROJECT INVOLMENT

Instrumentation Construction and Pre-Commissioning.

Electrical Construction Lighting and Grounding.

Fire alarm System Installation.

Water Treatment Plant (Demi Water, WWT Plant).

PROFESSIONAL RESUME

IRFAN ALI

INSTRUMENT AND CONTROL ENGINEER

Mob No: +966- 572581057

Email- adxz8n@r.postjobfree.com

Address in India

Vill-Dilawerpur (Donar)

PO-Mikee choke

PS-Bhadurpur

Dist-Darbhanga (846009)

Bihar.

Contact no: +913*******

Address in KSA-

AL-JUBAIL

IRFAN ALI

P.O Box No: 2425

Al-Jubail pin 31951

Contact no: +966-*********

Personal Data:

Deat of birth : 18/12/1992

Marital Status : Married

Nationality : Indian

Language Know: English.

Hindi & Urdu

Passport Details:

Passport No. : M2285462

Place of Issue : Patna

(Bihar)

Of issue : 22/05/2014

Valid up to : 21/09/2024

PERSONAL PROFILE

CARRIER OBEJECTIVE

+7 YEARS EXPERIENCE AS AN I&C ENGINEER

APPROVED BY ARAMCO INSTRUMENT QUALITY INSPECTOR APPROVAL AT JIGCC PROJECT

;

ORGANISATION : SEPCO III (SHANDONG ELECTRIC POWER CONSTRUCTION CO .LTD (KSA)

POSITION : I&C Engineer

PERIOD : FROM MAY 2020 TO JULY 2022.

PROJECT : PP13 POWER PLANT (DHURMA) RIYADH KSA.

CLIENT : SEC

NATURE OF JOB : Involve in ECC and MCC Package team. MY WORK RESPONSIBILITY ON THIS PROJECT:-

Preparation and review package Erection Completion Certificate (ECC) and Mechanical Completion Certificate (MCC).

Review work scope as per system & sub-system raising RFI related to system and sub-system. Package preparation and verification with construction team and submit to Quality Department. Conduct final walk down with Quality and Client.

Prepare and review punch list for closing punch.

ORGANISATION : SNAMPROGETTI SAUDIA ARABIA LIMITED

POSITION : Instrument Quality Engineer

PERIOD : FROM APRIL 2019 TO MARCH 2020.

PROJECT : JIGCC GASIFICATION PAKG-01&02

CLIENT : SAUDI ARAMCO AND AIR PRODUCT (JAZAN)

NATURE OF JOB : Involve as Quality Inspector for instrument Construction work. MY WORK RESPONSIBILITY ON THIS PROJECT:-

Responsibilities:

Preparing QA/QC Documentation and review project specifications for Instrument construction procedures.

Prepare and submit RFI/NFI/AFI (Request or Notification or Advice for Inspection) by hand and electronic of all completed site works including material receiving.

Check updated revision of all Instrumentation IFC drawing. OVERSEAS EXPERIENCE

Check all Instruments raceways installation including embedded & exposed conduits, duct banks, cable trays and etc.

ORGANISATION : E.TEC Engineering & Construction Ltd POSITION : Instrument Supervisor

PERIOD : FROM MAY 2018 TO DECEMBER 2018

PROJECT : IMC INHANCMENT EXTENSION PROJECT

CLIENT : SIPCHEM (JUBAIL)

NATURE OF JOB : Construction and Pre-Commissioning, Punch Closing. MY WORK RESPONSIBILITY ON THIS PROJECT

Saudi International Petro-Chemical Companies Methanol unit extension construction work

Installation of Sampling and Analyzing System and its Construction work.

Sample line connection to stream as per client requirement

Assist the Analyzer vendor for completion of FAT.

Worked closely with CAE and ABB vendor for smooth completion of the work related to analyzer.

Arranging Access/Permit if required for specific type of job.

Coordinate QC department on all construction issues and maintain good quality.

Carryout construction as per IFC drawings and follow PTS & other relative standards.

Sampling line connection to gas chromatograph and its Commissioning support with vender. ORGANISATION: GAMA Engineering & Construction Ltd

POSITION : I&C Engineer

PERIOD : FROM JAN 2017 TO APRIL 2018

PROJECT : PP13 POWER PLANT (DHURMA)

CLIENT : SEC (RIYADH)

NATURE OF JOB : Construction and Pre-Commissioning in Power Block GE System. MY WORK RESPONSIBILITY ON THIS PROJECT

Worked in latest GE gas turbines 7FA .5 Frame technology. 1. Responsible for all Instruments calibration and installation moreover, providing lab support to Pre- commissioning, Commissioning Startup up & maintenance till reliability test activities. 2. Testing & Commissioning are carried out in accordance with design and commissioning procedures / Contract

Specifications & maintaining appropriate levels of HSE quality on time. 3. Mark red-markups and request for approval if any changes made on site. 4. Update & Maintain records for the entire instruments damaged, swapped, calibrated instruments. ORGANISATION : DAELIM SAUDI ARABIA (LTD.

POSITION : DCS OPERATOR SUPERVISOR

PERIOD : FROM NOV 2014 TO DEC 2016

PROJECT : JUBAIL ELSTROMER PROJRCT KEMYA.

CLIENT : SABIC (JUBAIL)

NATURE OF JOB : Construction and Pre-Commissioning and Punch Closing. MY WORK RESPONSIBILITY ON THIS PROJECT

1. Involve in hot loop check with Client, DCS to Field. 2. Preparation of loop folder as per instrument and I/O list. 3. Lab Calibration of instrument prior to field installation. 4. Hand over loop folder after compilation of loop check for MCC package. 5. Construction all punch closing before start the pre-Commissioning work. 6. Daily walk down with Quality team to find the SOR and its closing. 7. Conduct daily meeting with client to discuss all issues related to our work scope.

Managed the manpower (Direct/In-direct, 50+) with organized manner in order to reach the project milestone.

Assign the targets for completion dates, according to the project priorities.

Technical review for any design issues (for reliability or functionality) and contact vendor to replace.

Mark red-markups and request for approval if any changes made on site.

Update & Maintain records for the entire instruments damaged, swapped, calibrated instruments.

Making always availability of calibrated instruments before the peak time or urgency acquires.

# DUTIES AND RESPONSIBILITIES

Update reports on daily basis with Excel sheet for each Instrument/Signal/Cable tracking of overall. on- going progress and for the same, to analyses and to achieve project target milestones.

Worked/involved in loop checks (Cold, Hot), Functional checks, Logic checks etc,

Assist the Project Manager in the preparation of planning/cost scheduling.

Review all related project specification and document. Check the installation of Instrument as per the drawings.

Redlining the drawings, Termination schedules, Datasheets etc., as per the modifications made on site and takes the approval from the client.

Prepare new Hook up drawings for any modifications and take the approval from the client.

Responsible for all types of instrument installation and its conducting cable pulling or termination. After raise RFI for punch closing.

Responsible for continuity /I-R test.

Pre-commissioning tests of all instrument cables.

Responsible for making the loop folder.

Redlining the drawings, Termination schedules, Datasheets etc., as per the modifications made on site and takes the approval from the client.

DECLARATION:

I hereby state that all the information prouder in my curriculum vita is genuine and correct and I am sure Having given an opportunity to work your organization, I will apply myself certainly for the benefit of Organization and achievement of its overall objectives. Place: Mumbai (INDIA)

Date:

IRFAN ALI

Contact this candidate