Irfan Shajahan Permanent Address:
Sr. Electrical Engineer Site operations/Technical Available on request Mansoura, Doha, Qatar
Mobile: +974-********-QATAR
: +91-637*******-INDIA
AIRPORT RAILWAYS HIGH-RISE BUILDINGS HOSPITALS HOTELS Email: *******@*****.*** MMUP/UPDA Registered licensed Engineers-20777 Expiry-2025.pdf Electrical Design Certification Course, BMTC Consulting – Qatar. CAREER OBJECTIVE:
14+ years’ experience as a Sr. Electrical Engineer in MEP Project Management & Site Engineering and Technical in Qatar & UAE on various projects with reputed Clients, Contractors, Consultants in the areas of in Design, Quality Assurance/Quality Control, Construction & Testing and Commissioning. CORE COMPETENCIES:
Electrical system design
study of ELV/LV/ MV
VOLTAGE LEVELS.
International standards
IEEE, IEC, NFPA, ANSI,
NEMA.
KAHRAMAA, QCS, FIRE
SAFETY CIVIL DEFENCE
REQUIREMENTS.
TRANSFORMER, SYNC
PANEL, ATS PANEL,
GENERATOR, LV, MV
PANEL, SMDB, MCC, DB,
CBS, UPS, Capacitor Bank.
Grounding and Lightning
Protection system
(Installation, Testing and
Commissioning).
All types of Cables, Wires,
Structured cabling system,
coaxial cables, RF cables,
Fiber Optic Cables.
(Installation, Testing and
Commissioning).
Well-versed with necessary
type of containments
required as per standards
and specifications with
complete knowledge on
Glanding, Dressing,
Termination, Splicing.
Lighting Control DALI
system, LCP control Relay
system (Installation, Testing
and Commissioning).
Fire Alarm system, FM-200
system, Vesda system
(Vesda Piping and Air
Sampling Units), Firefighting
system (Installation, Testing
and Commissioning).
Tunnel Ventilation system,
Smoke Ventilation system
(Installation, Testing and
Commissioning).
SCADA, Fiber-Optic-Comm
system, ECS.ACS, CCS
(Installation & Testing and
Commissioning).
CCTV, MATV, PAS
(Installation & testing and
Commissioning)
Interface knowledge in
Firefighting system, HVAC
system-AHU, Outdoor and
Indoor Unit, FCU and all
necessary Mechanical
System Integration.
Troubleshooting of all type
of electrical & electronic
equipment’s Smoke
detector, Heat detector, Duct
detector, and Manual call
points break glass, Strobes
Speakers, Strobes,
Input/output Modules,
Control Relays, Isolator
modules. Resolving the
problems related to
programming & integration
of Fire Alarm System with
MFACP.
Checking the cause &
effect table for the
reliable operation.
Expedite the testing &
commissioning of total
system for civil defence
inspection & approval.
Performing power switching
operation in the capacity of
PSE for the Project.
VALUE ENGINEERING
Projects Handled:
Project Client Engineer Cost
1. Katara Boutique Hotel
(G+2) & 32 Chalet
CHEDI & GHM Triple A/ KEO / Al Sarh QR 80 million
2. QATAR PETROLEUM
DISTRIC BUILDING
(FITOUT)
QATAR
PETROLEUM
KEO/AEB/MEDGULF QR 83 million
3. New Horse Stable and
VVIP GYM
Mr. Hilal Jeham Al
Kuwari
QDC / ASTAD /PME QR 58 million
4. International School
Sheikh Hamad
Bin Khalid Bin
Hassan A. Al
Thani
CEG / GCG QR 38 million
5. Sheikh Khalifa apartment
and Club House @ Al
Wajba
Sheikh Khalifa Al.
Thani ISQ /PME QR 20 million
6. Union Residential Tower
Sheikh Hassan
Abdullah Md. Al
Thani
MZ & Partner / UCC QR 120 million
7. Palestinian and Sudanese
school
Ashghal (Public
work Authority)
Qatar
AEB / UCC QR 64 million
8. Concourse 3, Dubai
International Airport
Expansion (Phase II)
Department of
Civil Aviation,
Government of
Dubai
DAR Al Handasah ADPi
JV
AED 1.58 Billion
9. Dubai Metro Project
(Station & Tunnel E&M
works for Red Line 27
station & Green Line 20
stations)
RTA(The Roads
Transport and
Authority of
Dubai)
Systra Parsons AED 1.58 Billion
10. Mono-Rail
(Station & Depot )
@ Palm Jumeirah UAE
Nakheel
Properties Nakheel AED 50Million
11. Dubai Duty Free
Warehouse, Building and
external works. UAE
Department of
Civil Aviation,
Government of
Dubai
DAR Al Handasah AED 110 Million
12. Cargo Terminal Building,
Phase 1, Dubai World
Central International
Airport. UAE
Department of
Civil Aviation,
Government of
Dubai
DAR Al Handasah AED 60 Million
CAREER ABSTRACT:
Hands on knowledge for the organization and direction of all Design review, Tender, Budget, Construction, schedule, and planning the requirements of projects. Ensuring materials used & work performed are as per specifications and design approved drawings.
Adept in planning & executing projects involving resource planning, budgeting, progress tracking, negotiations, contractual management and tendering, deft in conducting system/ requirement analysis, preparation of BOM, technical writing and rendering technical support to the project team.
Vast Knowledge in the Execution of Low voltage (LV) distribution system and Extra Low Voltage systems(ELV) of various MEP Projects as per international and Local standards.
Brief acquaint in the Installation of HVAC, Plumbing, Fire Fighting systems and its corresponding equipment’s as per international and Local standards.
Excellent skills in design phase including contract support, Optimization of cost.
Effective logging of suggested changes followed by development of cost estimates and work durations for all supported changes required along with periodic presentations to management and Client to confirm and take approval in time.
Effectively handled project management responsibilities for safety, quality and productivity borne by the individual along with monitoring final design development, supervision of direct reports.
Experience in resolving design conflicts; Construction Lead with supporting Fellow Site Engineers monitoring quality aspects of the construction. Coordinate with Project Controls Engineer in monitoring schedule / initiating trend notices.
Ensure Project personnel lead the way toward consultants’ compliance with all requirements, review project objectives with Subcontractors & Team members as necessary to maintain project schedule and ensure timely documentation in Minutes of Meeting and reporting is produced in accordance with project procedures. Schedule the supervisory personnel, entitled to multiple rotations, to ensure adequate coverage to manage all aspects.
Team player with excellent analytical, interpersonal and coordination skills. PROFESSIONAL EXPERIENCE:
1. M/s. Al Sarh Holding Group 4. M/s. ETA MECHANICAL & ELECTRICAL DIVISION, U.A.E Duration: October 2020 to Present Site Electrical Engineer Designation: Sr. Engineer Electrical Duration: November 2010 to March 2013 2. M/s. QMEP WLL – QATAR 5. M/s. ETA MECHANICAL & ELECTRICAL DIVISION, U.A.E Duration: September 2019 to August 2020 Purchase Executive Designation: Sr. Electrical Engineer Duration: November 2010 to March 2013 3. M/s. POWERMECH ENGINEERING WLL – QATAR
Designation: Project Electrical Engineer
Duration: June 2014 to August 2019
Roles & Responsibilities:
Lead Site Electrical Engineer –The CHEDI KATARA LUXURY BOUTIQUE HOTEL & CHALETS
To review Scope of work, Technical submittal, Drawings and Specifications
Preparation, submission and obtaining approval from consultant for shop drawing and material proposals submittal
Material Takeoff as per site requirement and approved material submittals and providing Technical assistance for the Procurement of materials
Plan the execution of all electrical related work and coordinate the work with mechanical and civil groups as per sequence of Method statement
Ensure the installation work carried out is as per approved shop drawing and within the time frame and progress of the approved construction program
Drawing guide lines and plans for the site engineers for their day to day activities
Liaison with the consultant for resolving technical issues arising in material submittal, Shop drawings and site issues
Coordinating all activities relating to the project from construction stage to completion
Responsible for checking the Single Line Diagram, DB Load Schedule, Cable Selection and the voltage drop cables
Review of shop drawings and detailed layout drawings prepared by the draftsman with reference to the latest Tender/ IFC drawings, Specifications and Guiding draught men to prepare shop Drawings based on Kahramaa/QCDD Regulations and after incorporating all the comments submit to the consultant to get the approval
Solving problems in layouts due to discrepancies of services with architectural, structural, reflected ceiling layouts and making proposals
Coordinate with the other Mechanical Systems for the Desired Electrical Loads of machines (Pumps, Chillers, AHU, and Package Units etc) and checking the design of the required MCC s
Well experience in Operation and Maintenance of Electrical System (LV & ELV), MV Panel, MCC Panel, SMDB, DB, Feeder Pillar for Outdoor Lighting, Street Lighting, Landscape Lighting, High Mast Lighting, Sports Lighting, Well-Known of Fire Alarm System, FM200 System, Building Management System, CCTV & IPTV System, UPS System, Access Control and Public Address System
Experience in invite quotation, evaluation and negotiation on commercial activities
Identification of project variations, claims, acceptance & execution.
Preparation of monthly invoices as per project work progress at site based on BOQ
Raising RFI to the Consultants for the Technical Clarifications
Preparation of As-built drawings and Operational & Maintenance manuals
Responsible to undertake site inspections and liaison with QA/QC
Preparation of Commissioning and Site Acceptance Test Procedures, knowledge in pre-commissioning and startup of electrical installation
M/s. ETA MECHANICAL & ELECTRICAL DIVISION, DUBAI
Site Electrical Engineer
Duration: From November 2010 to March 2013
Roles and responsibilities:
To review Technical Submittals, Schematic Drawings and Specifications for LT/HT installations
Material Quantities take off- from the drawing
To review the MEP co-ordination drawing
Planning, Scheduling and Liaison with direct and sub-contractors with the approved drawings, Instruction and schedule as appropriate
Installation and Testing of LV Panel Boards, HT/LT Switch Gears like ACB, MCCB and MCB
Installation of cable trench cabling systems, Low Voltage and Medium Voltage Power Distribution Network
Installation and Testing of Transformers, DG sets and its protection circuits
Review the work progress and rescheduling to meet target
To review and certify subcontractor payment bills based on work performed and price schedule.
Liaison with QA/QC, Consultant and Client
Preparation of Commissioning and Site Acceptance Test Procedures Purchase Executive
Duration: From Jan 2008 to October 2010
Roles and responsibilities
Responsible for Understanding Contract Scope, Terms & Conditions of the Awarded Contract, Significance of Guarantees, Payment Terms, Insurance and Post & Pre Tender Clarifications.
Quantities take off- from the drawing
Co-ordination with design department for the techno-commercial review
Responsible for material planning, procure and logistics activities
Involved in the review of Contract terms and to prepare/ review import letter of credit as per UCP.
To check and review the Budget out flow
Co-ordination with ongoing project sites with respect to delivery of material from suppliers
Ability to leverage supplier expertise to develop recommendations for production and value engineering to reduce costs and improve efficiencies
ACADEMIC QUALIFICATIONS
B.E., ELECTRICAL AND ELECTRONICS ENGINEERING 2007 Anna University / C. Abdul Hakeem college of Engineering & Technology, India
SUPPLY CHAIN MANAGEMENT 2007
Indian Institute of Material Management, Bangalore/India SOFTWARE COMPETENCE
Project Management : MS Office, MS Project
Design : AutoCAD, Dialux & ETAP
PC Skills:
Computer hardware and networking.
Software installations.
Microsoft office packages.
Working knowledge on Adobe software systems.
Working knowledge on all Operating systems.
Personal details:
Date of Birth: 16th SEPTEMBER 1986
Gender: MALE
Passport: P6212110
Nationality: INDIAN
Languages Known:
English Read Write Speak
Tamil Read Write Speak
Urdu Read Write Speak
Hindi Read Write Speak
Arabic Read Write Speak
REFERENCE AVAILABLE ON REQUEST
I hereby declare that the details furnished above are true and correct to the best of my knowledge and belief. I undertake to inform you of any.
Irfan Shajahan
Date & Signature