Machine Operator Mechanical Assembler

Objective: Seeking a long reliable job that requires me to utilize many of my useful skills and to be part of a fast growing company.

Experience: PCC Structurals, Inc. (09/2013-05/2023)

***** ** *4th Ave., Clackamas, OR 97015

Contact: Kym Dressell 503-***-****

Job Title: Trainer & Rework Grinder

Duties/Skills: Trained 15 employees simultaneously throughout the day. Training includes showing employees how to grind, review tech cards, and how to perform quality control manuals in order for them to successfully pass their tests and modules to help them achieve their certifications in order for them to perform their job duties. Daily interactions with Team Leaders, Visual Dimension Specialists, Welders, Engineers, Analysts, and Straighteners. Assigned project parts and special projects for rework grinding. Reviewed paperwork. Able to read, interpret, and follow specifications on tech cards and process control procedures. Follow sequence for routers and tech cards. Grind and blend defect areas on castings and also blend welds to blueprint tolerance. Review x-rays/inspection paperwork, sketches and blueprints to determine grinding requirements. Perform quality control on parts. Experience in using one-ton and two-ton hoist, electric pallet jack, pneumatic tools, grinding tools, profile gauge, calipers, dyers, magna-mike, UTT, snap gauge, filler gauge, blackout gauge, go and no-go gauges. Also experience in handling chemicals (acetone, developer, and penetrant) for part defects.

Reason for Leaving: Resigned

Altech Services, Inc. (02/13-09/13)

1160 Parsippany Blvd, Parsippany, NJ 07054 (Corporate Office)

Contact: Kevin Isaac 973-***-****

Job Title: Mechanical Technician

Duties/Skills: Assembled/Installed/Maintenance/Troubleshoot. Read drawings and schematic drawings. Assembled & built cable harness for control box and panels. QC and inspected parts. Installed cable harness for rooftop, cleats on roof, grounding roof, high voltage/low voltage jump box, HVAC boxes, pantograph, surge arrest, knife switch, HSCB, traction inverter, brake resistor, distribution box, and APSE boxes. Also installed fire panel, fiber glass insulation, stainless steel, couplers, bogie, bellow, headlights, windows, seats, sandboxes, holding rails, side markers, handicap signs, speaker box, cameras, sliding doors, door tracks, hydraulic pumps, brakes, floor panels, cable wiring, and sika fire seal. Applied V-damp to inside car cab for noise resistance. Sandblast brackets and panels. Paint/prime panels and brackets.

Also experience with contract jobs/work. Built street cars for City of Portland and other states.

Tools/Equipment: Pneumatic tools, power tools, electric tools, drill press, band saw, pipe cutter, creepers, cutting tools, crimpers, wire stripper, metric and standard tools, grinder, deburr tools, cable cutting tools, hole punching tools, ribbit guns, clecko tools, sandblast equipments, painting equipments, cocking guns, taps, wrenches, ali wrench, socket wrenches, and measuring tools (in/mm).

Reason for Leaving: End of Contract

ESCO, Inc. (6/11-2/13)

2141 NW 25th Ave, Portland, OR 97210

Contact: Andy S. 971-***-****

Job Title: Grinder/Fitter

Duties/Skills: Grind on digging lips and cutter heads and other castings that goes onto the digging lips (i.e.: shrouds, cheek plates, rope sockets, chain links), and other general construction (i.e.: buckets, liners, and dozers). Handled/worked with castings weighing in 500-5,600 lbs. Utilized MII for instruction to work on castings. Rigged up castings with chains and straps. Inspected the castings for cracks and other defects (QC). Used gauges and templates to fit castings and checked for gap tolerance in case of over grinding.

Tools/Equipments: 90 angle grinder, Chicago grinder, high speed grinder, burr, chipping gun, ali wrench, wrenches, band crimper, tape measurements, filler gauges, gauges and templates, half ton to two ton jig cranes, chains and straps, and electric hyster.

Reason for Leaving: Laid Off

Brooks Automation (2/10-4/11)

18870 NE Riverside Parkway, Portland, Oregon 97230

Contact: Marlena 503-***-****

Job Title: Mechanical Assembler III/ Cable Router/ Machine Operator

Duties/Skills: Mechanical Assembler, Material Inspection, Trouble Shoot Wafer Tools, Installed robots tracks and robots, controller, driver, load port, pdu boxes, inner lock boxes, and computer monitors. Assemble tools to make wafers in clean room. Cable wiring, assemble parts for wafer tools, sterilize parts, building fan filter unit and particle testing on fan filter unit. Read and interpret engineering and schematics drawings to assemble parts and wiring. Memorize screw size to assemble parts. Lay gasket and punch hole in gasket, tough up paint, tube fitting, labeling assembled parts. Observed inspections on robot and wafer carriers.

Tools Used: Digital leveler, wafer leveler, wafer measuring tools, ali wrench, drill tools, torque wrench, heat gun, particle test equipment, tap tools, wire cutter, wire crimper, and quality check.

Reason for Leaving: End of contract

J’s Super Cleaning (10/06-12/09)

12608 SE Alder Street, Portland, OR 97233

Contact: Manh Saechao (Co-Owner) 503-***-****

Job Title: Supervisor/Pressure Washer

Duties: Troubleshoot pressure washer equipment, handled hazardous materials, assembled and performed maintenance of the pressure wash machine, steam cleaned kitchen grease of stainless steel appliances, performed maintenance and cleaning of duck vent/fan, steam cleaned filters, installed fan belt, assembled pressure washer hose, and re-installed fan.

Reason for Leaving: Laid Off

Carlton Chainsaw Co. (07/05-09/06)

3901 SE Naef Road, Milwaukie, OR 97267

Contact: Curtis (Supervisor) 503-***-****

Job Title: Machine Operator/Parts Cleaner/Materials Handler

Duties: Troubleshoot and cleaned parts and machine daily. Operate chainsaw part cleaning machine; applied hazardous material onto cleaning machine, placed back into bucket after cleaning, placed new parts onto oil spinning machine to clean off oil, and assembled chainsaw parts.

Reason for Leaving: Resigned

Gunderson (08/04-7/05)

4350 NW Naito Parkway, Portland, OR

Contact/Supervisor: Chuck 503-***-****

Job Title: Welder/Grinder/Deck Helper/Materials Handler/Assembler

Duties: Assembled train deck frame, read blue prints, mig weld around frame, grind parts for train frame, torch cutting, and assembled hucking bolts.

Reason for Leaving: Laid-Off

Skills: Trained 15 employees simultaneously, Mechanical Assembler, Heat Treat Machine, Oil Spin Machine, Degreasing Machine, Harborizer Machine, Supervising, Janitorial Work, Worked with Hazardous Materials, Painting Experience, Oder Puller, Experience in Assembly Line, Warehouse Experience, Experience with Pressure Washing, Machine, Grinding, Machine Operator, Cleaning Parts, Excellent Communication Skills, Heavy Lifting (50+lbs), Pallet Jack, and Able to Mulitask.

Education: High School Diploma

Certification: Lean Six Sigma White Belt

References: Andy Samontry, Former Coworker, 971-***-****

Chris, Former, Coworker, 971-***-****

Manh, Former Co-Owner, 503-***-****

Contact this candidate