Page * of *

K. AMIRTHALINGAM

P/**, North Street, Aabatharanapuram, Mobile: - +91-801*******

Vadalur - Post. 607 303 Email – adx8z8@r.postjobfree.com Cuddalore - Dist., adx8z8@r.postjobfree.com

TamilNadu. INDIA. Skype ID – amirtham1978

Career Summary

• Total Experience-16Years - Qatar, Azerbaijan (Russia), Kuwait, India (Onshore & Offshore)

• Electrical and Instrumentation over 15years’ experience in industry, the Emphasis, being in Oil and Gas, LNGOnshore &Offshore, Petrochemical, Powerplants fields based Operation. This experience has lead to a proven track record in the Maintenance Pre - commissioning, commissioning, Construction& Operations of multidiscipline projects. ORGANISATIONAL EXPERIENCE

Since April, 2018 to Until with SUBSEA7 through NEXUS, - as an E & I Engineer. - (Saudi ARAMCO platforms- Offshore) - QATAR

Hook up and Star up Activities in wellhead upstream project Brown Filed and Green filed offshore – .

TOP SIDE MODIFICATION WORK for SFNY 4 DECK (ARAMCO Platforms) – Related Instrument work like Installation, Commissioning, Decommissioning and projects Specification loop check Site Acceptance Test, function Test checking, of all process, control and shutdown instrumentation part of FTR punch list preparation and start up activities of all types of field Electrical & instrumentation and control instrumentation, Responsible of cause and Effects checks, different level of ESD, PSD, USD systems, and function tests of Process activities. Since Oct, 2015 to May 2016 with HYUNDAI HEAVY INDUSTRIES CO, LTD, -Sing as an Instrument Supervisor- (Ras Gas& Qatar gas platforms- Offshore) - QATAR

FAP- TOP SIDE MODIFICATION WORK for MEG (RG & QG Platforms) – Related Instrument work like Installation, Commissioning, Decommissioning and projects Specification loop check Site Acceptance Test, function Test checking, of all process, control and shutdown instrumentation part of FTR punch list preparation and start up activities of all types of field Electrical & instrumentation and control instrumentation, Responsible of cause and Effects checks, different level of ESD, PSD, USD systems, and function tests of Process activities. Since Dec 2013 to Nov- 2014 with Ras Gas Company LtdThroughQatar Kentzas an InstrumentCom. Technician Ras Gas Offshore L.N.G Production Well Head (Barzan offshore Topside)

Commissioning Involving in wellhead upstream project Brown Filed and Green filed offshore hookup activates,

pre-commissioning, Testing and commissioning, carried out on ESD, RTU, HIPS, HPU, F&G, HVAC, Corrosion Inhibitor & Slops System Skid Process Instruments & Valves in accordance with Projects Specification loop checkSite Acceptance Test, function Test checking, of all process, control and shutdown instrumentation part of FTR punch list preparation and start up activities of all types of field Electrical & instrumentation and control instrumentation, Page 2 of 6

Responsible of cause and Effects checks, different level of ESD, PSD, USD systems, and function tests of Process activities and Pre-Commissioning of Wellhead control System’s

Process Instruments Calibration & Instrument Loop Checking: Calibration of Process Instruments like Pressure, Temperature, Level, Flow Transmitters, Pressure, Temperature, Level gauges & Switches, MOVs & ZVs Function Test, Loop Checking of Process Instruments, MOVs & ZVs and related Hookup activities like, Instrument Cable Glanding, Termination, Continuity and IR testing, Instrument Tubing, Pressure test & Leak testing of Instrument Tubing.

IA Compressor package, AHU Unit, Hydrogen Package, UPS, Batteries, Black Strat UPS & DCS in Oil & Gas Field Area (Hazardous & Non Hazardous).Fire& Gas system, de- tronics gas detectors etc. H2S Gas Detectors, Point type IR Gas detectors Open path (LOS) Gas Detectors, Flame UV/IR Detectors, Smoke Detectors VESDA System, Heart Detectors and Hydrogen Detectors Preventive Maintenance of Related all instrument controls system and Well Head Controls system. Well familiar with Plant safety and Fire and gas system and fusible systems.

Calibration of all type of filed process instruments and Control valves, Very well of P&ID and Loop Diagrams. Preparing of PTW (Permit to Work) – HOT & COLD, JSA, Tool Box Task, LUN, Drawings and others

Participates in Task Risk Assessments, incident investigations, safety meetings and toolbox meetings emergency response exercises/drills and Emergency Response organization as required (this may include responsibilities in Search & Rescue and Fire Fighting). Since Jun 2010 to Dec 2013 with CHEMIN Controls and Instrumentation Pvt Ltd (NLC) BHEL Instrument Supervisor (Maintenance and Operations).

• Leading a team consists for maintenance of process control filed instrument Involved in Routine, Corrective, Preventive, Breakdown & Shutdown, and annual maintenance of instruments In, Power Plant (2x250MW). Cabling, Glanding, termination work for all field Instruments from DCS and JBs LIEs, LIRs, IR, Electrical Switch Gears, etc….

• Errection and Commissioning of switches(LS,FS,DPS), transmitters (PT, FT, DPT, LT), thermocouple and RTD

• Loop checking of field instruments from DCS and PLC Panels

• Commissioning of all fans Control valves(Like pneumatic ON/OFF Valve, IGVs, etc..) and motorized valves and dampers

• Commissioning of control signals in LT and HT Switchgear

• Commissioning of turbine monitoring instruments like vibration sensors, speed sensors and shaft expansion

• Commissioning of EWLI system

• Commissioning and charging of DCS panel with ACDBs and UPS.

• Having good knowledge in understanding P&I diagrams, Cable scheduled and interconnection diagram(ICD)

• Co-ordination site activities, planning, Scheduling of day to day activities Since Nov 2007- Jan 2010 with Pearl Qatar through M/S. Arabian air conditioning contacting co (Maintenance and Operations) as an SITE ENGINEER (E & I) Page 3 of 6

• Very well experienced in Installation of Cable trays &Trunking, Electrical MV/LV Panels

(like MCCs, DBs, EDBs, MDBs and ESMDBs) & Isolators. Installation & testing of BUS DUCT& Plug in Unit (1200Amps). Lying of Cables &Glanding, Termination, Jointing and Meggering of cables (up to 300mm2).

• Installation & Commissioning of Lighting, Lighting Control System (Dimming) & power wiring systems, Earthling system, lightening system.

• Installation Commissioning of Central Batteries Systems (Like wiring, CDBs Panels, modules, programming).

• Installation of ELV Systems.

• Fire alarm System (Installation & Commissioning of wiring, Devices Installation, Fire Panels, Interfacing with other services and connections)

• Telecommunication System(Installation of Cabling, Devices and Patch Panels

• Door Intercom system (Installation of Cabling, Devices and DDCP Panels Testing

&commissinongs)

• CCTV & CO Monitoring System (Installation of Cabling, Devices).

• Audio Visual System (Installation of Cabling, Devices, Testing & commissioning)

• Installation & Commissioning of like BMS (Building Management System) like cabling, terminations, DDCP Panels Installations Fcu Control Panels). Installations of EMS (Energy metering Systems & FMS (Flow Metering System)

• Coordination with other services as per RCP layout.

• Preparing of MR, work programs schedule, RIW, RIM & RIF and maintaining the log and attending the minutes of meeting with consultant & Contractors. Since Jun 2007 Sep 2007 with British Petroleum through M/S. Kentz Caspian.as an ELECTRICAL TECHNICIAN (commissioning)Offshore Production Platform Oil & Gas (Azerbaijan) Preparing of PTW (Permit to Work) – HOT & COLD, JSA, Tool Box Task, LUN, Drawings and others.

Pre. Comm. & Commissioning & Testing of HV & LV Switch Boards (Senider), Diesel Generators, Motors, VFD LV Motors, Transformer, IA Compressor package, AHU Unit, Hydrogen Package, UPS, Batteries, Black Strat UPS & DCS in Oil & Gas Field Area (Hazardous & Non Hazardous).

Pre-commissioning and commissioning check Electrical Switch Board 22 kV, 6,6 kV, 660 V Switchgear & Instrumentation” Company (S&I), check wiring diagram, Current Transformers

( CT’s), Voltage Transformers (VT’s), check and install ( if necessary) set-point “Multilin” relay Feeder Manager SR-750, Motor Manager SR-469,check 660 V motor drives cubicles, feeder cubicles.Pre-commissioning & Commissioning checks and tests HV / LV Motor (ABB Company). Power Up, No load run, load run during 4 hours and DATAs Regarded.Pre. Comm.

&comm of LV panel like MCC, DB, SMDB, EDB, MDB, ESMDB, and Lighting (including Emergency lighting) and Power Circuits ( checking of Megger and lope test, RCD Test) Page 4 of 6

• Very well experience on the heat tracing installation, testing and operating

• Very well knowledge of loop checking for all field instruments (like PT, DPT,LT, FT, LS,FS, DPS,RTD and Thermocouples and also all detectors from field JBs, DCS Panels as per loop diagrams.

• Preparation test sheets for FTR and RTP standards, “As Built”, check this documentation for all Commissioning Team

• Preparation HV/LV Isolation ( Lock Out and Tag Out -LOTO ), Electrical Isolation Cert.

(EIC)

• Good experience on electrical international standards like NEC, IEC, IEEE

• Very Well Experienced for using of Instruments like Multimeter, Clamp On Meter, MEGGER, Loop Tester, RCD tester, DUST tester etc…

Since Apr2003 Nov 2006 with Kuwait Oil Company (KOC), (M/S. HEISCO, Formerly KSRC), East / South Kuwait as Snr .Electrical Technician (Maintenance and Operations)

• Corrective, Preventive, Breakdown & Shutdown, and annual maintenance of Maintenance of All Circuit Breakers and fault determined of the Control Circuit. Troubleshooting, analyze Electrical Problems. Very strong background in maintenance & troubleshooting of various electrical equipments used in oil & petrochemical industry (HT & LT Motors, Generators, Transformer, VFDS, PLC, MCC, and etc..)

• Maintenance of batteries chargers for UPS, DCPS, and Fire Alarm System and control system of lighting

• Maintenance of Motor Operated Valve (MOV) like Rotork, Limitork and Auma and also limit settings like manual/remote.

• Good ability to read and understand the electrical schematic diagram and fault findings.

• Good experience on the electrical isolation procedures for LV and HV equipment

• Administers maintenance work in close coordination with the maintenance planning and scheduling processes, Preparing of memos, power consumption scheduled, and shutdown scheduled, work activities, Materials cost Estimation, Collecting of equipment details of all types of electrical items from Site, drawing and catalogues for preparing the data to input in Materials & Maintenance Management System (MMMS) and Log Maintaining and Directs

& submits daily & monthly time sheets and Compiles daily activity report and etc.……

• Perform and/or direct preventive maintenance and/or overhauls defined in the preventive maintenance & survey program. Computer Knowledge in Preparing of Drawings, layout and single line diagram through the AutoCAD

Instruments In, Gathering Centre& Booster Station, Crude Oil desalting plant Condensate Recovery Units, Oil & Gas Separators & Scrubber, Inst. Air Compressor, Liquid Dehydration Units, Heaters, Gas turbine and Fire & Gas systems and Interlock Modifications Installation, pre-commissioning and commissioning of new Oil & Gas Flow Computer Units, Wellhead Electrical & Instruments / Control Panels, Water Treatment Plants, Since Oct 2001- Apr 2003 M/S. Pondi Oxides abdchemicaslLtd . As an Electrical supervisor - Maintenance

Performed Regular Preventive, Breakdown maintenance and, Trouble shooting of Electrical HT

& LT Switch gears, Motors, Starters, Transformers, Diesel Generators, UPS and Batteries, Lightings systems and also all kinds of electrical equipment for Chemical industries. Since Jun 2000- Sep 2001 M/S. .Rakshadent Dental Equipments . As an Instrument Technician Page 5 of 6

Perform daily and monthly preventive maintenance on the different types of field Instrument Carried out daily activities in following Calibration of all type of filed process instruments, Control valves, corrective and break down maintenance activities on instrumentation and control systems in assigned field, covering gas turbine generators & controls, pumps/compressors & controls, vessels, tanks, valves & piping. This includes working on pressure, temperature, level, flow and other measuring and control devices/equipment, protection devices/systems such as vibration, over speed and others, control valves, etc. May assist and participate in complex maintenance and repair activities carried out by specialists as required. Participates in shutdown and major overhaul activities by carrying out shutdown Since Jun 1999- Jun 2000 M/S. Bharath Engineering Works. As an Electrical supervisor Performed Regular Preventive, Breakdown maintenance and, Trouble shooting of Electrical HT

& LT Switch gears, Motors, Starters, Transformers, Diesel Generators, UPS and Batteries, Lightings systems, PLC panels and also all kinds of electrical equipment Maintenance of All Circuit Breakers and fault determined of the Control Circuit. Troubleshooting, analyze Electrical Problems. Very strong background in maintenance & troubleshooting of various electrical equipments used in oil & petrochemical industry (HT & LT Motors, Generators, Transformer, VFDS, PLC, MCC, and etc..). Maintenance of batteries chargers for UPS, DCPS, and Fire Alarm System and control system of lighting for mining Nature of Duties

• Trouble shooting of critical Instrument Loops Alarms and trip Interlock system, Functional test and system alarm test.

• Trouble shooting and maintenance all type of process instrument based on foundation filed bus

• Revamping and Loop checking for Honeywell, Foxboro ABB and Rosemount Emerson Delta V DCS systems

• Familiar with Fisher Rosemount HART communicator 275 & 375,475 SFC Honeywell,

• Various conventional and smart transmitters (pressure, flow, level and temperature) of makes Rosemount, Foxboro, Honeywell, Yokogawa, Magnetrol, Fisher, Masonelian etc.

• Various control valves of Fisher (DVC 2000, 5000 series), ABB Kent Introl, Masoneilan, Valtek, Grooves,

• Fire & Gas detecting instruments: Calibration & Functional checks of Gas detector, H2S, HC, OPEN PATH IR Type, Flame detector UV/IR, smoke sensors, heat detectors, VESDA, CCTV, and Analyzers such as water and Gas..

• ICSS installation and verification of hardware punch-lists. Connection and termination of cables for the DCS marshaling box

• Troubleshoot and Repair Analogue and Digital Controls. SAT and FAT procedure of the new DCS panels

• Produce JSA and operating procedure for critical equipment’s,

• Reporting safety concerns to Field safety dept in day to day activities

• Loop checking of all input/output and system configuration

• Maintain critical spares availability on board by raising to the concern

• PM (preventive maintenance ) and S/D Planning and execution

• Preparation of drawings, ITR’s and as-built

Educational Profile [Academic & Technical]:-

• Diploma in Electrical and Electronics Engineering. Page 6 of 6

Maruthi Polytechnic. - Athur - Tamil Nadu.

April- 1999 1st Class with Honours

• H.Sc.,[Board of Higher secondary Education.Tamilnadu], Group: vocational Electrical Motor Rewinding]

VallalarGurukullam Higher Secondary School – Vadalur - Tamil Nadu April- 1996,

• S.S.L.C [Board of Secondary Education.Tamilnadu.]. Govt.Higher Secondary School - Kurinjipadi - Tamil Nadu. April- 1994

Extra Skills:-

1- MS Excel, MS Word, Outlook, MS Power Point and Windows XP and 2000 2- Auto Cad Drawings

Sys.com.(System solution) Internet Point – Vadalur - Tamil Nadu. Dec-2002 (Three Month) - 1st Class

OFFSHORE CERTIFICATE

SeaMan Book

CDC No. : MT 49866

Issuing By : Belize Agent (code No. 02)

Date of Issue : 15th Oct - 2015

Date of Expiry : 14th Oct – 2020

TBOSIET (OPPITO APROVED)

Date of Issue : 31st Mar - 2018

Date of Expiry : 30th Mar – 2022

H2S/BA

Date of Issue : 28th Mar - 2018

Date of Expiry : 27th Mar – 2020

Personnel Profile:-

Name Fathers : K. Krishnamoorthy

Date of Birth : 20.05.1978

Sex : Male

Marital Status : Married

Nationality : Indian

Languages Known : English, Tamil, Hindi, Malayalam and Arabic Passport Details:-

Passport No : X8724717

Date of Issue : 24/05/2023

Date of Expiry : 23/05/2033

Place of Issue : Chennai

ECNR Status : Not Required

Yours Faithfully,

(K.AMIRTHALINGAM)

Contact this candidate