**/**** - **/**** ****** Tech

Turn * Specialty Company, Baytown, TX

I performed safety meeting an went over JLA with employees to make sure the understood there work step an how to do it safely. An i went over permitts to make sure the had the proper PPE they needed the the job 09/2022 - 12/2022 QC/ Safety

PTC liberty tubular, Liberty, TX

i inspected pipe for weld damage, an face damage. I also was on there safety team 05/2022 - 09/2022 Technition

Clean Combustion Inc, Dayton, TX

I ran pipe from my Flare to the connection point an then flared the product off. So the company could do there job safely.

03/2022 - 04/2022 Stand by Rescue, Fire fighter

Safe Rescue, Crosby, TX

Stand by rescue, first responder, high angle rescue, low angle rescue 09/2021 - 02/2022 Maintenance

Vector contractor, winnie, TX

i did bolt up, an torqueing, hydro

04/2020 - 01/2022 Hunting Guide

Triple R Kennels, Hull, TX

i did guided hunts

TERRY ROUNTREE

PO BOX 85, BATSON, TX 77519-0085

Phone: 936-***-****

Alt Phone: 936-***-****

Email: adx864@r.postjobfree.com

Objective

A position in the construction industry as a site laborer or trade helper. Ability Summary

Environmental spill clean up

Environmental Safety

Pipeline Maintenance

Employment History

05/2019 - 05/2020 Pipe Inspector

Boomerang Tube LLC, Liberty, TX

Inspect, test, sort, sample, or weigh nonagricultural raw materials or processed, machined, fabricated, or assembled parts or products for defects, wear, and deviations from specifications. May use precision measuring instruments and complex test equipment.

02/2019 - 05/2019 Fitter

Dragon Products, Liberty, TX

Welder fitter, bolt up and built tank and operated a forklift. 09/2018 - 02/2019 Maintenance Foreman

Tucker Midstream, Beaumont, TX

Mowing, pulling blinds, flanges, Running forklift an back hoe, tarquing, hydro an pigging

04/2017 - 03/2018 Pipeline Maintenance

Primoris, ROSHARON, TX

Run equipment such as forklift, backhoe. I was foreman over a maintenance crew. we pulled motors an pumps at the substations, we also did repairs on the pipe line, hydro an torqued flanges an valves.

09/2016 - 04/2017 Pipeline Maintenance

J Rollins Construction, Dayton, TX

Pulled vavles an changed out gasket. Changed filters an pigs. Launched pigs down the lines and ran a forklift an equipment, hydro pipe an torqued flanges. 03/2015 - 09/2016 Pipe fitter

Cleaver Brooks, BEAUMONT, TX

fitt pipe run a thread machine, an bolt up, hydroed pipe an spool pieces an torqued flanges an valves.

01/2015 - 03/2015 Bolt Up Fitter

Signature Industrial, Fannet, TX

Bolt up flanges, bolt up spool pieces, torqued flanges an hydro spool pieces an pipe 09/2014 - 01/2015 Pipe Fitter

Coastal Field Service, Fannet, TX

Bolt up flanges an valves, cut an fit pipe, rig up valves an spool pieces, torqued flanges an valves, hydroed spool pieces an pipe

03/2014 - 09/2014 Torque an hydro technition

Stranco, MONT BELVIEW, TX

I torque flanges, an performed hydro test on pipe an spool pieces. 02/2014 - 03/2014 Pipefitter

Cajun Industrial Design, Houston, TX

Cut pipe, threaded pipe, laid out, measured, and assembled pipe, i also torqued flanges an valves an performed hydros on pipe .

03/2013 - 12/2013 Pipefitter/Inspector/Threaded pipe Cajun Contractors, Beaumont, TX

Fitted an prepped pipe for the welders. Threaded pipe and inspected the pipe to be put on the rack. also performed hydros an torqued flanges an valves 11/2012 - 03/2013 Maintenance

SWAT Construction, Beaumont, TX

Fitted pipe, mowed pipelines, welded, used pressure washer, laid flare lines and put in flow lines Ran back hoe, washed mud tanks, and did rig washes, i also performed hydros an torqued flanges an valves

04/2011 - 10/2012 Pipefitter/Rigger/Hydro

CB & I Contractors, Beaumont, TX

Cut pipe, threaded pipe, helped pipefitter with the fitting of pipe. Assisted in the layout, measurement, and assembly of pipe. Was responsible for the hydroing of the pipe.

05/2008 - 04/2011 Floor Hand

Premiere Casing, Winnie, TX

Stabber, ran backup tones, pulled slips and washed floors. Helped on laydown machine.

01/2008 - 06/2009 Pipefitter/Bolt Up/Hydro/Rigger

Austin Industrial, LaPorte, TX

Prepped pipe to be flew in the rack. Rigged the pipe up an flew the pipe in the rack. Put in all the flanges an valves in an prepared it so we could hydro it. Operated a grinder, torch, plasma cutter, welded on guides, stops, and plugs. 02/2007 - 05/2008 Pipefitter - Helper

Becon Construction, Houston, TX

Cut pipe, threaded pipe, helped pipefitter with the fitting of pipe. Assisted in the layout, measurement, and assembly of pipe an performed hydros an torqued flanges.

12/2005 - 02/2007 Pipefitter/Bolt Up/Hydro

Performance Contractor, Houston, TX

Tested equipment and rigged pipe to fly in rack. Fitted pipe, ran grinder, torch, welded on guides an supports. I run a plasma cutter, welded pipe an cut pipe. Bolt up flanges, an put blindes in. I also hydro the pipe. 04/2001 - 11/2005 Floor Hand

Doucet Olifield Service, BATSON, TX

Worked floors,drifted pipe, washed pipe, took thread protectors off, washed mudtanks, floors and derricks.

High School Diploma

West Hardin High School,, None Selected

10/2021 OSHA 40 HAZWOPPER

OSHA

09/2021 OSHA 10

OSHA

09/2021 Certificate

ISTC Safety Council

07/2021 CPR AED Life Support

American Heart Association

Education History

Occupational Licenses, Certificates and Training

07/2021 License

TWIC

01/2019 Vol Fire Fighter/First Responder

Batson Fire Department

Volunteer Firefighter and First Responder for the Batson Fire Department since 01/2019. Hazmat Spills and Environmental Clean Up experience 3 years. Additional Information

Contact this candidate