Piping Engineer Qc Inspector
Resume:
AMMAR JUANDA, ST
Mobile Phone : 081*********
E-mail Address : *********@*****.***
PERSONALITY
Sex : Male
Nationality : Indonesian
Address : Jl. Depati Galang Negeri RT 08 Desa Kumun Hilir, Kec-Kumun Debai, Kota
Sungai Penuh – Kerinci – Jambi (South Sumatra)
EDUCATION BACKGROUND
1998 – 2003 (5 Years) : Bachelor Degree of Mechanical Engineering, Faculty of Engineering UNTAG 45 Surabaya GPA 3.03 0f 4.00 point scale.
TRAVEL DOCUMENT
Passport no. : A 5056785
COURSE AMD TRAINING
-AUTO-CAD 2 D&3 D at Vicom Computer Surabaya (Certified)
-English course “Easy speak” Surabaya-Indonesia(Certified)
-Automotive Training at “PT. ASTRA 2000“ Surabaya
-Authorized Entrant and Standby Person for confined space at NIOSH Sarawak-Malaysia
SKILLS
Experience in Piping, QA/QC Inspector, testing and commissioning for Construction of Petrochemical Plants, Geothermal Oil & Gas Industries, Power Plant And Refinery (Onshore) in the field of Engineering, Fabrication, Installation, Testing, Maintenance, Preservation, Pre-commissioning.
Well familiar in the preparation of Technical Reports, MTO (Material Take Off), Estimate quantities and Progress reports, Testing Procedures, Punch-list and Documentation. Capable of Co-ordination, Supervision, Motivating personnel and doing physical work and other duties the Company may require.
LANGUAGE : Able to communicate in English, both oral & written
COMPUTER : (Word, ability to work with excel spreadsheets, Project)
PROFESSIONAL WORKING EXPERIENCE
Total Experiences : 14 Years Mechanical & Piping Engineer
From current Company to Previous Company
1. PT. GLOBAL PROJECT GROUP (SINARMAS)
(Power Plan and Chemical Plan)
Period : 15 November 2021To Current
Position : Exspert Mechanical & Piping Engineer
Location : Jakarta - Indonesia
Job description:
Prepare BOQ Base of P& ID Drawing, 3D Drawing, Isometric Drawing And GA Drawing for Purchase.
Review vendor Doc., ReviewTechnical Bidder Evaluation for Contractor Tender, reviewTBE Materia purchase.
Estimate Dia-inche, Weight of Pipe and support base of Isometric drawing and GA Drawing.
Follow the development of execution schedule ensuring both timing and sequencing are correct
Ensure and monitoring fabrication (Fit-Up and welding) spool pipe at workshop as per production drawing issue.
Investigating problems and diagnosis/repairing faults
Writing report, documentation, providing techSeniornical support and ensuring safe working condition.
Prepare weekly and monthly piping progress report.
To lead and activities supervise a team of piping supervisor and sub-contractors.
To perform any other duty as assigned by Head of Department from time to time.
Job in progress :
Power Plan and Chemical Plan
2. PT. RAPP_PROJECT (RGE GROUP)
(Power Plan And Chemical Plan)
Period : 3 october 2020 To 2 october 2021
Position : Senior Piping Engineer
Location : Pangkalan Kerinci - Pekanbaru - Indonesia
Job description:
Prepare BOQ Base of P& ID Drawing, 3D Drawing, Isometric Drawing And GA Drawing for Purchase.
Review Vendor Doc, 3D Drawing, isometric drawing base of P&ID drawing
Estimate Dia-inche, Weight of Pipe base of Isometric drawing.
Follow the development of execution schedule ensuring both timing and sequencing are correct
Ensure and monitoring fabrication (Fit-Up and welding) spool pipe at workshop as per production drawing issue.
Investigating problems and diagnosis/repairing faults
Writing report, documentation, providing techSeniornical support and ensuring safe working condition.
Prepare weekly and monthly piping progress report.
To lead and activities supervise a team of piping supervisor and sub-contractors.
To perform any other duty as assigned by Head of Department from time to time.
Job in progress :
Power Plan
3. PT. TPL - PROJECT (RGE GROUP)
(Power Plan And Chemical Plan)
Period : 10 April 2017 To 9 April 2019
Position : Senior Piping Engineer
Location : Porsea - Medan - Indonesia
Job description:
Prepare BOQ Base of P& ID Drawing, 3D Drawing, Isometric Drawing And GA Drawing for Purchase.
Review isometric drawing base of P&ID drawing
Estimate Dia-inche, Weight of Pipe base of Isometric drawing.
Follow the development of execution schedule ensuring both timing and sequencing are correct
Ensure and monitoring fabrication (Fit-Up and welding) spool pipe at workshop as per production drawing issue.
Investigating problems and diagnosis/repairing faults
Writing report, documentation, providing technical support and ensuring safe working condition.
Prepare weekly and monthly piping progress report.
To lead and activities supervise a team of piping supervisor and sub-contractors.
To perform any other duty as assigned by Head of Department from time to time.
Job in Complete :
Power plan
4. PT. OKI MILL PROJECT ( SINARMAS GROUP )
(Power Plan and Chemical Plan)
Period : 10 August 2015 T 9 Februari 2017
Position : Field Piping Engineer
Location : Palembang - Indonesia
Job description:
Prepare MTO Base of P& ID Drawing, Isometric Drawing And Key Plan Drawing for Purchase.
Review isometric drawing base of P&ID drawing
Estimate Dia-inche, Weight of Pipe base of Isometric drawing.
Follow the development of execution schedule ensuring both timing and sequencing are correct
Ensure and monitoring fabrication (Fit-Up and welding) spool pipe at workshop as per production drawing issue.
Investigating problems and diagnosis/repairing faults
Writing report, documentation, providing technical support and ensuring safe working condition.
Prepare weekly and monthly piping progress report.
To lead and activities supervise a team of piping supervisor and sub-contractors.
To perform any other duty as assigned by Head of Department from time to time.
Job in progress:
-Cooling Tower (AG) Above Ground 6 Cell For Chemical Plant (CLO2-SO2-PAC)
-Cooling Tower (UG) Under Ground 20 Cell for Power Plant
( Evaporator, Turbine Generator, Power Boiler, Recovery Boiler, Air Compressor, Etc)
- HVAC And Chiller Freezer for All Area.
5. Sealink Engineering & Slip way SDN BHD, Miri–Serawak-Malaysia.
(Oil And Gas)
Period : July 2014 – July 2015
Position : Field Piping Engineer
Location : Serawak–Malaysia.
Job description:
Control all materials piping as per drawing.
Make sure installation position line pipe in vessel.
Prepares Material Take-Off (MTO) for Material Piping & Equipment.
Issuing Material under Project as per planning.
Assure that all pipe support is properly installed of correct type and material.
Plan, control and supervision of mechanical piping pre-fabrication and installation work activities.
Follow -up and monitoring delivery material according target.
Prepare monthly progress report and defect list for each vessel.
To lead and activities supervise a team of piping supervisor and sub-contractors.
Review Completed project documentation for completeness responsibilities.
Make sure all the pipe system at vessel has to hydro testing and Air test (Pneumatic).
Check all piping system on Vessel
Familiar with all piping fitting and components including piping material and pressure
Job in progress:
SS 139 (67 M, Multi Purpose Tug/Supply Vessel)
SSS 162 (61.2 m ( Supply Vessel )
SSS 131 (111 m Accomodation Crane Barge 300 Persons)
SSS 167 (78 M, Landing Craft / Utility Vessel)
6. Piasau Slip Way SDN, BHD. ( Shinyang Group) Miri–Serawak-Malaysia.
(Oil And Gas)
Period : April 2012 TO April 2014
Position : Piping Engineer
Location : Sarawak–Malaysia.
Job description
Prepare MTO for Purchase as per P&ID Drawing, Isometric Drawing And Key Plan Drawing
Review P&ID Drawing And Isometric Drawing
Follow up Surveyor Comment per P&ID drawing
Prepare Engine Room arrangement base of designer drawing and approve by owner
Prepare and make sure production drawing with 3D drafter engineer as per schematic drawing
Issuing correct Material under Project as per planning and according with production drawing issue
Control and monitoring fabrication spool pipe at workshop as per production drawing issue
Control and monitoring under water spool pipe for send galvanized and after galvanized before install on board
Control and monitoring flushing and chemical clean for Hydraulic pipe and fuel oil pipe before install on
Supervise and coordinate pressure test for pipe line system.
Running commissioning for pipe line system.
Follow -up and monitoring delivery material according target.
Prepare piping monthly progress report.
To lead and activities supervise a team of piping supervisor and sub-contractors.
Project Completed:
-YD 385 (54.4 M, SEISMIC SUPPORT VESSEL)
-Owner: ALMARIN (Main port Singapore)
-Class : ABS
Job in progress:
-YD 386 (54.4 M, SEISMIC SUPPORT VESSEL)
-Owner: ALMARIN (Main port Singapore)
-Class : ABS
7. Sealink Engineering & Slip way SDN BHD, Miri–Serawak-Malaysia.
(Oil And Gas)
Period : November 2008 – March 2012
Position : Assistant Piping Superintendent
Location : Serawak–Malaysia.
Job description:
Control all materials piping as per drawing.
Make sure installation position line pipe in vessel.
Prepares Material Take-Off (MTO) for Material Piping & Equipment.
Issuing Material under Project as per planning.
Assure that all pipe support is properly installed of correct type and material.
Plan, control and supervision of mechanical piping pre-fabrication and installation work activities.
Follow -up and monitoring delivery material according target.
Prepare monthly progress report and defect list for each vessel.
To lead and activities supervise a team of piping supervisor and sub-contractors.
Review Completed project documentation for completeness responsibilities.
Make sure all the pipe system at vessel has to hydro testing and Air test (Pneumatic).
Check all piping system on Vessel
Familiar with all piping fitting and components including piping material and pressure
Project Completed:
-Maria-G, (53 M, Multi Purpose Deck Ship )
-Owner : O.M.S ( AUSTRALIA )
-Mariska-G, (53 M, Multi Purpose Deck Ship)
-Owner : Sea link Engineering, Sdn. Bhd
-Cassandra-G, (53 M, Multi Purpose Deck Ship)
-Owner : O.M.S (AUSTRALIA)
-Roxxane-42,(58 M, Multi Purpose/Offshore Support Vessel)
-Owner : Bravo Topaz
-Roxxane-43,(58 M, Multi Purpose/Offshore Support Vessel)
-Owner : Sea link Engineering Sdn. Bhd
-DuyongSatu,(58 M, Multi Purpose/Offshore Support Vessel)
-Owner : Malaysian Oil Field
-PIMIS-3308, (67 M, Multi Purpose Tug/Supply Vessel)
-Owner : PIMIS
-HALUL-38, (61.2 M, Supply Vessel)
-Owner: HALUL Offshore.
8. PT. Dry Dock World Graha, Batam
(Oil And Gas)
Period : June 2007 - October 2008
Position : Piping Inspector
Location : Batam - Indonesia
Job description:
Monitor Contractor activities daily to ensure that they meet the requirement of the Project Quality Plan.
Review Contractor radiographs and NDT Report to ensure acceptability specification.
Review material certification for project material to ensure it meets specify and check that it’s corresponds to actual material supplied.
Conduct any quality control investigation as deemed necessary or as request by Project Team Leader of the QC/QA Coordinator.
Provide QC Information for quality reports as required by the Project Team Leader.
Ensure that Contractor quality records are being maintained on a regular basis.
Review Completed project documentation for completeness responsibilities.
Make sure all the pipe system at vessel have to hydro test and air test.
Prepare and done of welder test.
Inspection Welding damage for Piping after fabrication
Project involved:
-Four Projects Jack Up Rig, Owner Standard Drilling AS
-Two Projects Service Jack, Owner Master Marine AS
-Class: ABS
9. PT. Jaya Asiatic Shipyard, Batam (Jaya holdings Ltd. Singapore)
(Oil And Gas)
Period : May 2006 - May 2007
Position : Piping Supervisor
Location : TanjungUncang, Batam –Indonesia
Job description:
Make sure, checked and control fabrication of pipe spool and ensure its nicely and good performance before install on ship
Verification of in process inspection, final inspection and welding.
Responsible for material control & updating including take-off, procurement support, etc.
Conduct Assist in preparation of purchase requests for shop and field material.
Make sure all piping job must be complete in schedule.
Make sure all piping job on ships and vessel according with international standard.
Prepared field instruction and problem solved in piping job.
Coordinator and Supervise for Commissioning.
Develop material, insulation & coatings specifications, identify & list special piping components.
Responsible for material control & updating including take-offs, procurement support, etc.
Communicate and interface with other project design and engineering disciplines for release the project
On assignment to the field, support construction in drawing and specification interpretations, design modifications, scheduling, system checkout and test packages.
Project Completed:
- Support Service (Crane Barge) Jaya Installer (Singapore)
Class: ABS
REFFERENCE:
1.MOHAMAD ASRI BIN MATNOR
SURVEYOR /ABS MIRI-MALAYSIA
Lot 800 2nd floor
Bintang Jaya Commercial Centre Jalan Bintang
Miri 9800
Phone, +601********
E-mail, *******@*****.***
2.MR. WAHYU SUSILO
Project Manager
SEALINK ENGINEERING AND SLPWAY SDN, BHD. MIRI-MALAYSIA
Phone: +601********
Best Regards,
Ammar Juanda, ST
PH: 081*********
Contact this candidate