Curriculum Vitae

Dattaji K. Shinde, Ph D

Mob: 336-***-****

Email: adwkv3@r.postjobfree.com

Education:

Degree

School /College /University

Month and Year

CGPA/Marks

Postdoc

JSNN, North Carolina A and T State

University USA

1st Jan 2015 to 30

June 2015

NA

Ph.D.

Nanoengineering

North Carolina A and T State

University USA

December 2014

4.0/4.0

M. Tech. Design Engineering

Indian Institute of Technology IIT Delhi

January 2002

7.4/10

B.E. Mechanical Engineering

Government College of Engineering, Dr. B. A. M. University Aurangabad, India

June 2000

64%

M. Tech. Thesis:

Design and fabrication of flapping wing mechanism for Micro Air Vehicle (Prof. Sanjiv Sanghi)

Ph. D. Thesis :

Effect of Electrospun Nanofibers on the Short Beam Strength of Laminated Fiberglass

Composite (Advisor-Prof. Ajit Kelkar)

Principal Research Fields and Expertise in:

Low-Cost Composite Manufacturing (VARTM Processing) and Mechanical Characterization of Materials

Computer Aided Design and Modelling,

Finite Element Modeling and analysis of Composites structures,

Fatigue, Impact Modeling and Testing of Polymeric Composites, Ceramic Composites, and Textile Composites,

3D Printing-Additive, nano and bio manufacturing,

Process Modelling in composites

Industrial and Project Management

Product Design and Development

Functional and Smart Material synthesis

Electrospinning

Design of Mechanical system

Software Skills with 20 Years of Experience

ANSYS workbench 21

Solidwork 2023

AutoCAD 360 fusion

Pro/Engineer wildfire 4.o

Mechanalyzer

MS Office

MS Projects

Primevera

SPSS

J-Octa

LAAMPS

LSDyna

Siemens Teamcenter

Laborigin

MATLAB Simulation

FEAST

Professional Experience: Total 21Years (till date)

Position

Employer

Beginning

Ending

Associate Professor and Head of Production Engineering

Veermata Jijabai Technological Institute (VJTI) Matunga Mumbai, India

01.09.2022

Continuing

Visiting Professor

University of North Carolina Charlotte NC USA

21.05.2019

31.05.2019

Technical Advisor

S V Gas Pvt. Ltd. Mumbai

01.06.2018

Continuing

Associate Professor Production Engineering

Veermata Jijabai Technological Institute (VJTI) Matunga Mumbai, India

18.01.2011

Continuing

Head of Production Engineering

Veermata Jijabai Technological Institute (VJTI) Matunga Mumbai, India

30.06.2016

05.09.2018

Maintenance Intern Engineer

Premiere Fibers Inc. Ansonville NC

20.10.2015

31.01.2016

Post-doctoral Scholar

Gateway Research Park, Joint School of Nanoscience and Nanoengineering North Carolina A and T State University Greensboro NC USA

02.01.2015

30.06.2015

Graduate Research Assistant

Joint School of Nanoscience and Nanoengineering North Carolina A and T

State University Greensboro NC USA

09.08.2011

31.12.2014

Assistant Professor Production Engineering

Veermata Jijabai Technological Institute (VJTI) Matunga Mumbai, India

18.01.2008

09.08.2010

Lecturer Mechanical Engineering

Rajiv Gandhi Institute of Technology, Andheri (west) Mumbai 400069

21.07.2003

17.01.2008

TPI Engineer

Mahanagar Gas Limited Mumbai deputed Through DAT Engineering Mumbai India

13.08.2002

20.07.2003

Lecturer Mechanical Engineering

Saroj Institute of technology and Management Lucknow (UP) India

17.01.2002

31.07.2002

Current Professional Organization Membership

Lifetime Member of ASME (USA), Lifetime Member SAMPE (USA),

Lifetime Member IEOM (USA), Lifetime Member WASET, Lifetime Member SAE India, Lifetime Member ISTE (India), and Lifetime Member AMSI.

Lifetime Member SAVE International USA

Honors and Awards:

Reviewer of International Journal on Interactive Design and Manufacturing -Springer Nature

Reviewer of Journal of Engineering Research (JER) Kuwait University Publication 2020

Reviewer of Elsevier’s the European Polymer Journal from May 2019

Reviewer of Elsevier’s the Journal of the Optics and Laser technology from May 2019

Reviewer of WASET international Journals for Nanocomposite and nanomaterials

Reviewer of Sage’s the Journal of Composite Materials from May 2019

The Best Start-up Award by World Trade Centre Mumbai and Chamber of Commerce and Industry on March 2nd, 2019 in the International Conference on Business and Start-up at D Y Patil University Mumbai

The Best Dronacharya Award for Mentoring Innovation Product for Smart Navigation Band at National level Entrepreneur Competition Organized by Jaro Education Mumbai on 29th of Jan 2019.

Head of Department of Production Engineering from 30 June2016 to 27 August 2018

Recipient of Dr. Wadaran L. Kennedy Scholar Award, North Carolina A and T State University, 2012-13

Recipient of Scholarly Accomplishments and Excellence in Academic Performance Award, Division of Student Affair and International Student and Scholar’s office, North Carolina A and T State University, NC 2012

Assistant Controller of Examination, VJT Mumbai April 20, 2009-July 2011.

Academic Supervisor for M. Sc. (Engineering Business Management), International Manufacturing Centre, University of Warwick, Coventry CV4 7AL, United Kingdom from 2009-2011.

Recipient of Indian Oil Scholarship Award for 1998-2000 for Best Undergraduate Student of Mechanical Engineering at Government college of Engineering Aurangabad.

Service: Holding Additional Portfolio at VJTI Mumbai from Jan. 2016 till date

MHRD’s Institutions Innovation Council President, Start-up and E-Cell Coordinator,

AISHE Convener, ARIIA Nodal officer,

SAMPE International Student VJTI Mumbai Chapter Faculty Advisor

SAMPE International Professional Chapter President

IEOM Society USA Student Chapter VJTI Mumbai Faculty Advisor

Experience in Manufacturing, Design, Analysis, Inspection and Testing for Composite Materials and Products

Industry/Firms

Beginning

Ending

Godrej Boyce Corporation Limited, Mumbai, India

May2008

Continuing

Mukand Steel Limited, Mumbai, India

May 2008

June 2011

Voltas Limited, Mumbai, India

May 2008

June 2011

Siemens Limited, Mumbai, India

May 2008

Continuing

Larsen and Toubro Limited, Mumbai, India

May 2008

Continuing

Mahindra and Mahindra Limited Mumbai, India

May 2008

Continuing

Tata Autocomp System Limited, Pune, India

June 2016

Continuing

Baba Atomic Research Center, Mumbai, India

June 2008

June 2011

Arihant Industrial Corporation limited, Mumbai, India

June 2008

July 2011

Municipal corporation Greater Mumbai

July 20019

Continuing

Everlast Composites LLP Mumbai

July 20019

Continuing

Seera Composite Pvt LTD Mumbai

July 2018

continuing

Trailer design Checking for Transport commissioner

Mumbai

June 2017

Feb 2019

EPP Composite Rajkot Gujarat

October 2019

Continuing

S V Gas Pvt Ltd. Mumbai

June 1st 2018

Continuing

Indian Navy Hospital -ASVINI Mumbai

1st March 2022

Continuing

Deco Metals Pvt. Ltd Vasai Thane

20th March 2021

Continuing

Sanrachan Structural Consulting LLP Thane

June 2022

Continuing

Shri S M Autade Pvt. Ltd.

Feb 2022

Continuing

Teaching Experience: Courses Taught from 2002 to 2022 academic years for even and odd semester of Undergraduate and Graduate Student class of 60 students are Engineering Mechanics, Strength of Materials, Dynamics of Machinery, Strength of Material Lab, Engineering Design, Data Structure, Graphical User Interface and Data base Management, Programming languages C, C++, Finite Element Analysis, Computer Aided Design and Computer Aided Manufacturing, Information Technology for Management, Management Information System, Manufacturing process, Tool Design, Project management, Material Management, Value Engineering, Engineering Machine Drawing, Engineering Design for Machine Elements, Composite Material Processing and Technology, Machine Design, Theory of Machines, Nanomaterial and Nanocomposites,

Universities Visited:

University of North Carolina Charlotte NC from 21-31 May 2019 for research collaboration

Columbia University New York USA from 1-7 June 2019 for research Collaboration.

University of Texas A and M University Texas, USA for Research Collaboration from 1st Nov. 2018.

USA: Through TEQIP –I Attended International Training Programme on Lean Manufacturing at Michigan State University Ann Arbor MI USA (Nov. 2008)

Visited for Collaborative research to Duke University, North Carolina A and T state University NC USA, Georgia State University Atalanta GA, North Carolina State University NC, South Carolina State University SC, USA (Nov. 2008-2014)

Completed Ph D in Nanoengineering from North Carolina A and T state University NC USA in December 2014.

Research and Publications: Total Publications: 74

Patents

04

Research Projects

16

Papers Published in International Journals

44

Papers Published in International Conferences

26

Papers Published in National Conferences

02

Book Chapter

03

Sessions Conducted in FDP/STTP

23

Short Term Courses Attended (1-2 week)

14

Publication List of Dr Dattaji K. Shinde till April 2023

Peer reviewed Journal and Conference publications

1.Nilesh Shahapure, Dattaji Shinde, Ajit Kelkar. Atomistic modeling and molecular dynamic simulation of polymer nanocomposites for thermal and mechanical property characterization: A review[J]. AIMS Materials Science, 2023, 10(2): 249-287. doi: 10.3934/matersci.2023014.

2.Uthale, S., Shinde, D., Shahapure, N., Kulkarni, S., & Nikam, M. (2023). Effect of MWCNTS on mechanical properties of woven fabric hybrid polymeric nanocomposites and finite element analysis of nanocomposite. International Journal on Interactive Design and Manufacturing (IJIDeM), 1-18.

3.Divyanka M Sontakke, Dattaji K Shinde, “Development and Characterization of Electrode using PAN/TiO2 Nanofibers to improve the Battery Capacity” Springer International Conference on Recent Evolutions in Energy, Drives and e-Vehicles -REEDeV-2022, Nagpur, September 16-17, 2022 paper Id-34.

4.Shraddha Chavan, D. K. Shinde, “Development of Scheduling Optimization Tool using Excel VBA and Solver for Productivity Improvement of Slitting Machines for PVC/PVDC film”, The Second Indian International Conference on Industrial Engineering and Operations Management, NITW Warangal, Telangana, India, August 16-18, 2022. ID-35.

5.Rohit Agrawal, D. K. Shinde, “Vehicle allotment and route optimization for transportation services using logistic techniques in supply chain management”, The Second Indian International

Conference on Industrial Engineering and Operations Management, NITW Warangal, Telangana, India, August 16-18, 2022. ID-34.

6.Dattaji K. Shinde Atul V. Karanjkar (2022), Design Simulation of Cam Dynamic Test Rig to Facilitate the Study of Modified Four-Dwell Profile Using Minimum Rubbing Velocity, Journal of Xi'an University of Architecture & Technology Volume XIV, Issue 3, pg. 106-118.

7.Suhas A.Uthale, Dattaji K. Shinde, Nadir Ayrilmis (2021), Experimental Study for Flexural Rigidity and Cost Optimization of the Woven Fabric Glass/Carbon/Basalt and Hybrid Epoxy Composites, Journal of Xi'an University of Architecture & Technology, Volume XIII, Issue 7, pg. 683-695.

8.Suhas A. Uthale, Nitin Dhamal, Dattaji K. Shinde, Ajit D Kelkar (2021), Polymeric hybrid nanocomposites processing and finite element modeling: An overview, Science, Progress 2021, Vol.104(3) 1–44 DOI: 10.1177/00368504211029471.

9.Divyanka Sontakke, Amit D. Kamble, Dattaji K Shinde, Nadir, Ayrilmis (2021), Synthesis and Characterization of PAN/TiO2 Based Carbon Nanofibers for Energy Application, Journal of Xi'an University of Architecture & Technology Volume XIII, Issue 7, Page. 213-225. https://doi.org/10.37896/JXAT13.7/31321

10.Akshay Bogil, D. K. Shinde. (2021). Study and Implementation of Project Management Principles in New Product Development in the Automobile Manufacturing Industry. GRD Journals- Global Research and Development Journal for Engineering, 6(6), 43-53.

11.Aliasgar Bohara1, D. K. Shinde. (2018). Synthesis and Characterization of Graphene based Acrylonitrile Butadiene Styrene Nanocomposite Using Fused Deposition Method. Processing of 4th International Conference on Nanotechnology- Applications, Advances and Innovations NANOCON 2018.

12.Chandak, M., Naik P. A., Shinde D. K., & Raut, D. (2020). Process Parameter Optimization for Laser 2D Barcode Engraving using Taguchi Design of Experiment Technique. International Research Journal of Engineering and Technology, 9(11), 263-267.

13.Dattaji. K. Shinde, S. C. K. (2019). A review on study of polymers and recent development and future challenges in materials for additive manufacturing-3D printing. Additive Manufacturing Journal, 1(3), 53-62.

14.Dipesh Patil, Naik P. N., D. K. Shinde., D N. Raut. (2021). Framework for Implementing Quality Management System for Heavy Construction Equipment Manufacturing Industry. International Journal of Engineering Research & Technology (IJERT), 10(5), 416-421.

15.Divyanka Sontakke, A. T., D. K Shinde, Sujata Parmeshwaran. (2019). Morphological and Electrical Characterization of Polyacrylonitrile Nanofibers Synthesized Using Electrospinning Method for Electrical Application. International Journal of Electrical and Computer Engineering, 13(06), 421-426.

16.Emmanwori, L., Shinde, D. K., & Kelkar, A. D. (2013). Mechanical properties assessment of electrospun TEOS nanofibers with epon 862/w resin system in a fiber glass composite. 45th ISTC - Wichita KS - Oct 21-24 / 2013,

17.Ghorpade, K., Naik, P. A., Shinde, D. K., & Raut, D. (2021). Experimental Investigation of Grit Blasting Parameters on Alpha Case Removal of Forged Alloy Part Ti-6Al-4V used in Aviation Industry. International Research Journal of Engineering and Technology, 10(5), 311-314.

18.Gokhare, V. G., Raut, D., & Shinde, D. K. (2017). A review paper on 3D-Printing aspects and various processes used in the 3D-Printing. Int. J. Eng. Res. Technol, 6, 953-958.

19.Harsh Gyamalani, D. K. Shinde. (2020). Application of Project Management Processes for Construction of Gas Pipeline Projects. International Journal of Innovative Research in Science, Engineering and Technology, 9(11), 103**-*****.

20.Joshi, A. D., Raut, D., & Shinde, D. K. (2017). Study of Simulation Behaviour of Tire and Effect

of Working Conditions on Slipping Behaviour. International Journal of Engineering Science, 14389.

21.Kambli, P. V., & Shinde, D. K. (2020). Project Planning for Installation and Commissioning of Odorization Unit for CGD Projects. International Research Journal of Engineering and Technology, 9(11), 103**-*****.

22.Kausalkumar Patwa, D. K. Shinde, D N Raut. (2018). Comparative study of traditional and agile methodology of Project risk management and application of agile risk tool. The Proceeding of 34th Value Engineering International Conference. - SAVE international 2018 Mumbai,

23.Ketan Ghorpade, Naik P. A., D. K. Shinde., D N. Raut. (2021). Experimental Investigation of Grit Blasting Parameters on Alpha Case Removal of Forged Alloy Part Ti-6Al-4V used in Aviation Industry. International Journal of Engineering Research & Technology (IJERT), 10(5), 311-314.

24.Kothawade, A., D K Shinde. (2019). Improvement of Bottleneck Operations using Facility Planning Techniques in a Major Electric Overhead Travelling Crane Manufacturing Organization. 5th International Conference on Industrial Engineering, Proceeding of ICIE 2019,

25.Kulkarni, S. C., J. S., & Shinde D. K. (2019). Mechanical and Electrical Properties of Carbon Nanotubes Based Acrylonitrile Butadiene Styrene Nanocomposite Fabricated Using Fused Deposition Method. SAMPE 2019,

26.MASAB USMANI, D. K. Shinde., D N Raut. (2018). Design and fabrication Process of Chemical Storage tank of Fiberglass polymeric composite and its failure analysis. The Proceeding of 34th Value Engineering International Conference. -SAVE international 2018 Mumbai,

27.Nagve Vikas, Shinde. D. K., Kulkarni V. (2018). Effective Use of A-GPS for Generating Geographical Coordinates to Locate Natural Gas Utilities in Suburban Area. International Journal of Engineering Research, 7(5), 82-85.

28.Nilesh B. Shahapure, A. D. K., Dattaji. K. Shinde. (2021). Molecular Dynamic Simulation and Experimental Investigation of Short Glass Fiber Reinforced Polymeric Nanocomposites for Mechanical Properties. SAMPE Virtual Conference Proceedings. Long Beach, CA, June 29-July 1, 2021. Society for the Advancement of Material and Process Engineering – North America.,

29.Nishad Nahatkar, J. T., Balaji Paikrao, D. K. Shinde, D N Raut. (2018). Development and Implementation of Project Planning Process to Mitigate the Key Factors Responsible for the Project Failure. The Proceeding of 34th Value Engineering International Conference. -SAVE international 2018 Mumbai,

30.P. V. Gharat and D. K. Shinde, D. N. R. (2019). Design and development of fissure detection and imaging techniques for brown rice kernels to improve quality of rice miller. Journal of Emerging Technologies and Innovative Research (JETIR), 6(2), 40-45.

31.Pillewan, V., Raut, D., Patil, K., & Shinde, D. K. (2017). Carbon Nanotubes Based Porous Framework for Filtration Applications Using Industrial Grinding Waste. International Journal of Materials and Metallurgical Engineering, 11(2), 202-208.

32.Pillewan, V., Raut, D., Patil, K., & Shinde, D. K. (2018). Carbon to Carbon Nanotubes Synthesis Process: An Experimental and Numerical Study. Materials Today: Proceedings, 5(2), 6444-6452.

33.Poonam Tapare, D. K. Shinde. (2017). Zero Base Budgeting in Automotive Part Cost. International Journal of Engineering Science and Computing, 7(7), 137**-*****.

34.Pramod Nehe, D. K. Shinde. (2018). Inventory Accuracy for Switchboard Manufacturing Plant using Cyclic Counting method. International Research Journal of Engineering and Technology, 5(9), 688-695.

35.Pritesh V. Kambli, D. K. Shinde. (2020). Project Planning for Installation and Commissioning of Odorization Unit for CGD Projects. International Journal of Innovative Research in Science, Engineering and Technology, 9(11), 103**-*****.

36.R V Kharampure, R. P. H., Arun Sharma, D K Shinde, B E Narkhede, K P Karunakaran. (2017). 3D Printing of Patternless Sand Molds. Proceeding International Conference on Manufacturing Excellence (ICMAX-2017),

37.Ranjan, S. K., & Shinde, D. K. (2018). Implementing Lean Manufacturing Technique in Fabrication Process Planning–A Case Study. International Research Journal of Engineering and Technology, 5(7), 2600-2606.

38.Ruturaj Bhaskare, D. K. Shinde. (2017). Development of Cold Supply Chain for a Controlled Atmosphere Cold Store for Storage of Apple. International Journal of Engineering Science and Computing, 7(7), 142**-*****.

39.Sachin C. Kulkarni, D. K. Shinde. (2021). Effect of In Fill Patterns on 3D Printed Multi-Wall Carbon Nanotube Based Acrylonitrile Butadiene Styrene Nanocomposite on Mechanical Properties. SAMPE Virtual Conference Proceedings. Long Beach, CA, June 29-July 1, 2021. Society for the Advancement of Material and Process Engineering – North America.,

40.Sachin C. Kulkarni, J. S., Dattaji. K. Shinde. (2019). Mechanical and electrical properties of carbon nanotubes based acrylonitrile butadiene styrene nanocomposite fabricated using fused deposition method. SAMPE Conference Proceedings. Charlotte, NC, May 20-23, 2019. Society for the Advancement of Material and Process Engineering – North America. DOI: https://doi.org/10.33599/nasampe/s.19.1406,

41.Sachin P Ghongade, D. K. Shinde. (2017). Manufacturing Execution System Approach to Achieve Operational Excellence for Pipes and Fitting Manufacturing Industry. Proceeding International Conference on Manufacturing Excellence (ICMAX-2017) Savitribai Phule Pune University during 3-4 March 2017. Nashik India,

42.Sahasrabudhe, O. S., Raut, D., & Shinde, D. K. (2017a). Effect of parameter interactions on hybrid TIG MAG arc welding process. Int J Mech Eng Technol, 8(10), 332-341.

43.Sahasrabudhe, O. S., Raut, D., & Shinde, D. K.(2017b). Particle tracing for metal transfer in hybrid TIG MAG arc welding process of interacting heat sources. International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017),

44.Sahu, S., & Shinde, D. K. (2017). Multiproject Scheduling By Prioritizing Projects of Domestic Piped Natural Gas Using Analytic Hierarchy Process. International Journal & Magazine of Engineering, Technology, Management and Research, 4(6), 588-594.

45.Sarambale, D. S., and D. K. Shinde. (2017). Electro-fusion joint failure polyethylene pipes analysis and its simulation using finite element analysis. International Journal of Mechanical and Production Engineering, 5(11), 51-55.

46.Sawant, P., & Shinde, D. K. (2020). Experimental Study of Process Parameters Influencing Powder Coating of EN8 Steel Shaft used for Manual Squeezer off Tool using Taguchi Approach. International Research Journal of Engineering and Technology, 9(11), 182-186.

47.Sayali Parab, D. K. Shinde., D N Raut. (2018). Standardization of triple constraint in construction industry. The Proceeding of 34th Value Engineering International Conference. -SAVE international 2018 Mumbai,

48.Shaikh, A., Pendam, D., & Shinde, D. (2017). Improving Logistics System by using Lean Manufacturing. International Journal of Engineering Science and Computing, 7(7), 139**-*****.

49.Shinde, D., Kimbro, E., Mohan, R., & Kelkar, A. (2013). Mechanical properties of woven fiberglass Composite interleaved with glass nanofibers. ICCM19,

50.Shinde, D. K. (2014). Effect of Electrospun Nanofibers on the Short Beam Strength of Laminated Fiberglass Composite North Carolina Agricultural and Technical State University.

51.Shinde, D. K., Emmanwori, L., & Kelkar, A. D. (2013). Mechanical Properties Assessment of Electrospun TEOS Nanofibers with EPON 862/W Resin System in a Fiber Glass Composite. 45th ISTC - Wichita KS - Oct 21-24 / 2013,

52.Shinde, D. K., Emmanwori, L., & Kelkar, A. D. (2014). Comparison of mechanical properties of EPON 862/W with and without TEOS electrospun nanofibers in nanocomposite. SAMPE 2014, Seattle WA USA, June 2, 2014,

53.Shinde, D. K., & Kelkar, A. D. (2014). Effect of TEOS electrospun nanofiber modified resin on interlaminar shear strength of glass fiber/epoxy composite. World Acad. Sci. Eng. Technol. Int. J. Mater. Metall. Eng, 8, 54-60.

54.Shinde, D. K., & Kelkar, A. D. (2016). Short Beam Strength of Laminated Fiberglass Composite with and Without Electospun TEOS Nanofibers. SAMPE 2016 - Long Beach CA USA, May 23-26

/ 2016,

55.Shinde, D. K., White, F. T., & Kelkar, A. D. (2014). Flexural behavior of fiberglass polymer composite with and without TEOS electrospun nanofibers. ASME International Mechanical

Engineering Congress and Exposition,

56.Suhas Uthale, D. K. Shinde. (2020). Mechanical characterization of neat epoxy resin and its failure analysis using FEM. International Conference on Functional Materials-2020 (ICFM-2020), Proceeding of the International Conference on Functional Materials-2020 (ICFM-2020) to be held during January 6-8, 2020, at Indian Institute of Technology Kharagpur West Bengal 721302.

57.Suhas Uthale, N. D., Dattaji. K. Shinde. (2021). Comparison of Mechanical Properties of Hybrid Woven Fabric Reinforced Epoxy Composites Fabricated Using of Glass Carbon and Basalt Fibers. SAMPE Virtual Conference Proceedings. Long Beach, CA, June 29-July 1, 2021. Society for the Advancement of Material and Process Engineering– North America.,

58.Tamgadge, V., & Shinde, D. K. (2018). Analysis of Critical Success Factors for Construction Projects. International Research Journal of Engineering and Technology, 5(9), 414-417.

59.Trishala Zende, D. K. Shinde. (2017). Causes of Delay and Cost Overruns in A Domestic and Commercial Natural Gas supplying Company and Its Analysis Using Research Methodology. International Journal of Scientific and Research Publications, 7(6), 173-177.

60.Vicky Pravin Poladia, D. K. Shinde. (2017). A Review on use of Mistake Proof (Poka Yoke) Locating Fixture on Ultra SD Cartridge Assembly Line. International Journal of Advanced Engineering Research and Science, 4(1), 164-167.

61.Viraj R. Ghodke, D. K. Shinde. (2018). Cost optimization in Pharmaceutical Industry through Time Study. International Research Journal of Engineering and Technology, 5(8) pp.62-69.

62.D. K.Shinde, Deshmane P.B. (2009). Identifying and setting safety stock levels. In the proceeding of Ninth Global Conference on Flexible Systems Management November 12-14, 2009, NITIE, Mumbai, India (OM165 pg.1-8).

63.D. K. Shinde, Deshmane P.B. (2009). Optimization of Internal Logistics by Using Different Parameters. In the Proceeding of Ninth Global Conference on Flexible Systems Management, November 12-14, 2009, NITIE, Mumbai, India (OM166 pg. 1-9).

64.Dattaji K. Shinde, Amol Arun Sonawane. (2010), Implementing Lean Manufacturing System on Small Fabrication Shop Using Value Stream Mapping (VSM). In the Proceeding of International Conference on Frontiers in Mechanical Engineering (FIME-2010), 20-22nd May 2010 NIT Surthkal Karnataka, India (MMF-127).

65.Kunal B. Hole, D. K. Shinde (2017). Installation and Commissioning of New Assembly Line (EGR Valve)”, 2nd National Conference on Recent Trends in Mechanical Engineering (NCRTME - 2017), WCE, Sangli, NCRTME – 2017.

66.Snehal Deshmukh, D. K Shinde (2017), Identifying and Analyzing Critical Factors in Laying MDPE Pipeline and GI work, International Journal of Engineering Research & Technology(IJERT) Vol.6 (6), 1047-1051.

67.Amol A. Sonawane, Dattaji K. Shinde, Kunal R Shinde (2010), Utilizing Lean Thinking for Obtaining Waste Reduction in Construction Supply Chain, Proceeding of the National Conference on Recent Trends in Mechanical Engineering RTME2020 MET’s Institute of Engineering Bhujbal Knowledge Park City Nasik 422003 M. S. India. pp.169-174.

68.Ranjeet Yadav, D.V. Pendam, D. K. Shinde(2017), Comparative Thermal and Structural Analysis of High Pressure Gas Turbine Blade using Finite Element Method, International Journal of Innovative Research in Technology, June 2017, IJIRT, Volume 4 Issue 1, ISSN: 2349-6002, page. 231-236.

Book Chapters

1.Bhosle, A., Sah, A., & Shinde, D. K. (2020). Application of Value Analysis and Value Engineering for Cost Reduction of Global Pumping Unit. In Advances in Simulation, Product Design and Development (pp. 663-674). Springer, Singapore.

2.P. V. Gharat, D. K. Shinde., D. N. Raut. (2019). Finite element analysis and three-point bend testing

of Indian rice grains with fissures effects. In Advances in Computational Methods in Manufacturing, Lecture Notes on Multidisciplinary Industrial Engineering. (Vol. 2019, pp. 1059- 1072). Springer, Singapore.

3.Pillewan, V., Raut, D., Patil, K., & Shinde, D. K. (2019). Thermogravimetric/Differential Thermal Analysis (TG–DTA) of Binary Metal Catalyst for Multiwall Carbon Nanotube (MWCNT) Synthesis. Mechanical Engineering for Sustainable Development: State-of-the-Art Research, 105.

, PART II: MATERIALS AND MANUFACTURING (MM) 12. TG-DTA Analysis of a Binary Metal

Catalyst for Multi-Wall Carbon Nanotubes Synthesis (pp. 677). AAP CRC Press book chapters by Talyors & Francis.

Patents Published/Filed

Sr. No.

Title/Name of Patents

Inventors

IP Number

Date of Filed/Published

1

Development Of Hybrid Polymeric Nanocomposite Using glass, Carbon And Basalt Fibers As Reinforcing Elements.

Dr Dattaji K Shinde

202*********

07-07-2022

2

Fabrication Of Polyacrylonitrile/Titanium Oxide-Based nanofibers Battery with Enhanced Electrical Properties

Dr Dattaji K Shinde

202*********

13-07-2022

3

Development Of Nanoengineered ABS-MWCNTs Composite using Fused Deposition Modeling (FDM) 3d Printing Infill patterns

Dr Dattaji K Shinde

202*********

18-07-2022

4

A Microwave Assisted Casting of Metals and Metal Alloys

Dr Dattaji K Shinde

202*********

29-07-2022

National/International Conference Organized:

1.1st International Conference on Recent Advancements in Design and Manufacturing (ICRADM 2020) being jointly organized by VJTI and SVNIT Surat, India during 16th-17th July 2020.

2.National Start-up Networking Conference 2020 organized for faculty student and entrepreneurs during the 14th, 15th and 16th February 2020 in association VJTI Start-up Cell of TEQIP-III, VJTI Alumni Association and MHRD IIC for VJTI at VJTI Mumbai Role as President.

3.National Start-up Networking Conference 2019 organized for faculty student and entrepreneurs during the 2nd and 3rd February 2019 in association VJTI Start-up Cell of TEQIP-III, VJTI Alumni Association and MHRD IIC for VJTI at VJTI Mumbai Role as President.

4.National Start-up Networking Conference 2018 organized for faculty student and entrepreneurs during the 17th and 18th February 2018 in association VJTI E -Cell at VJTI Mumbai Role as President.

Selected Keynote Lectures and workshop presentation: 23

1.Delivered the keynote address at Online FDP & STTP on “NANOTECHNOLOGY: Synthesis, Characterization and Applications of Nanomaterials in Engineering & Science” organized by Department of Mechanical Engineering Under lead College activity Shivaji University, Kolhapur and in association with ISTE, New Delhi on 21 January 2022.

2.Delivered the keynote Address on Industry 4.0 Future & Readiness of India for Manufacturing Growth for “Online Conference on Emerging Technology” DTE Government of Maharashtara Azadi ka Amruta Mohotsav at TCET Mumbai conducted on 26th November 2021.

3.Delivered talk on Role of Nanotechnology in Renewable Energy applications AICTE ATAL Academy FDP Programme on ‘Renewable Energy source during 13-18 Dec. 2021 organized by

Department of Electrical Engineering of St. Vincent Pallotti College of Engineering & Technology, Nagpur-441108

4.Delivered Talk on 3D printing of polymeric nanocomposites prospect and challenges in the FDP on 3D Printing and Design sponsored by AICTE's Training and Learning (ATAL) academy at SPCE Mumbai on 22 September 2021.

5.Delivered Talk on Nanotechnolgy Impact on Development of functional Materials

Contact this candidate