NDT Coordinator / NDT Inspector / DRT Inspector

CURRICULUM VITAE

NDT Supervisor /NDT Planner

CHARLES STEPHAN: Tel. No.: +91-463*-****** E-mail: ste_charles @ yahoo .co. in

Cell No.: +91-944******* ste_charles @rediffmail.com

Permanent Address,

6/46, Bungalow Street,

Vadakangulam,

Tirunelvelidist,

Tamilnadu,

India

Pin-627116

Date of Birth - 11/06/1970

Passport Number - Z5447239

Expired Date - 09/07/2029

CARRIER HIGH LIGHTS:

My resume covers 22 plus years of experience including 15 years of gulf experience. Having good experience in Radiographic testing, Ultrasonic testing, Magnetic particle testing, Dye penetrant testing, and Radiographic film interpretation, Welding Quality Control. Worked in tanks, pressure vessels, piping, pipe lines, castings, boilers, heat exchangers, and oilfield structures in onshore and offshore jobs. Have sufficient exposure with the relevant codes and specifications.

EDUCATIONAL QUALIFICATION: SSLC

BA

TECHNICAL QUALIFICATION:

PCN Level 2 3.1 & 3.2 in Ultrasonic Testing.( No-323345)

In-house Certification program of Silver Wing Level - II in Floormap MFL Scanning,Rapid Motion Scanner,Didital Radiography Scanner from RBG Middleeast Certification, Doha,Qatar.

ASNT Level - II Radiographic Testing, Ultrasonic Testing, Magnetic Particle Testing, Dye Penetrant Testing & RP2X.

In-house recertification program of ASNT Level - II in RT, UT, MPT, DPT from Al Hoty Stranger Certification, Saudi Arabia

In-house recertification program of ASNT Level - II in UT, MPT, DPT from H.A.H Conam

Inspection Certification, Muscat, Oman.

In-house recertification program of ASNT Level -II in UT, MPT, DPT from Al Khaja PIH Certification Dubai,UAE.

In-house recertification program of ASNT level -II in UT, MPT, PT from Emirates Industrial Laboratory certification Dubai, UAE.

SAFETY PROGRAMES AND TRAININGS:

Health, Safety & Environment( HSE) course from National Training Institute, Petroleum development, Oman

H2S Awareness & Escape course from National Training Institute, Petroleum development, Oman

Permit to Work holders course from National Training Institute, Petroleum development, Oman

Radiation Health and Safety course, Saudi Aramco, Saudi Arabia.

Health,Safety & Environment,H2S Awreness & Escape course, Confined Space Entry & Permit to work holders course from Rasgas, Doha,Qatar.

T-HUET OPITO Approved course from SMTC Global, Ghana. Valid until 03rd May 2023.

OGUK Offshore Medical Valid until 23rd April 2021.

IMIST Certificate Valid until 24th April 2023.

FAMILIAR EQUIPMENT’S

Ultrasonic Equipment Krautkramer - USK7B, USM 33 & DM4DL

Panametrics - Epoch4Plus, LT & XT

Nova - TG400

MPI Equipment Magnaflux Prod type

RSL Mini-E-Mag Yoke y6

DigiRad Film Scanner GE PegasusTM CR50P & CR25P

Hardness Equipment Krutkramer Mic20

COMPUTER SKILLS:

MS-Office 2007

Merridium

Coabis

Rhythm Radiography (GE) (Advance Image Acquisition Software for X-Ray & Gamma Ray)

Rhythm Review (GE) (Advanced image review tools and data management for all types of inspections)

PROFESSIONAL EXPERIENCE:

May 2019 to Till Date : NDT Coordinator /NDT Planner in Global Energy Ventures (GEV), Ivory Coast on MV10 Boabab FPSO Modec.

Duties: - Involved in Corrosion Monitoring, PPM activities, Reporting using Amos,Coabis, Preparation of work packs for Shutdown, Discuss safety Toolbox Talk.

Nov 2009 to Jan 2019 : NDTInspector/NDT Planner in PRETECT (RBG Middle East),Qatar on Gas Processing plant, RASGAS, Raslffan, Qatar.

Projects:- RASGAS LNG (Qatar Gas) Company, Qatar (secondment from RBG) Onshore and Offshore.

Shutdowns Involved: Train-5 April2010, Train 1&2 May2010, Train 6 June2010, AKG 1 Feb 2011, Train 3&4 May 2011,AKG 1& 2 Feb 2017,Train 6 & 7 March 2018.

Duties: - Involved in Corrosion Monitoring, PPM activities, Reporting using Meridium, Preparation of work packs for Shutdown, Discuss safety Toolbox Talk

Duties in On shore: -Jobs involved Conventional Ultrasonic Testing (Corrosion Survey, HIC Scanning and weld Flaw detection) Radiography Testing (Profile radiography and digital radiography on existing pipelines) Magnetic particle testing and Penetrant Testing on existing welds on columns, vessels and fired equipment during shutdowns, Internal rotating inspection system (IRIS) Assistant for exchanger tube bundles.

Duties in Offshore: -Actively involved Conventional Ultrasonic Flaw detection using Shear wave TKY joints Weld inspection on Wellheads, Riser Platforms and Production Platforms & Conventional Ultrasonic Testing for Corrosion survey on Inlet facility Pressure piping, Vessels & Heat exchangers, Magnetic particle testing on Safety Swing rope Lifting Lugs Manway davits & Internal welds on vessels during Shutdown

March 2009 to July 2009 ; NDT Inspector in Teknica Uk Ltd, Libya, on Oil & Gas Plant,Zutina Oil Compay,Libya.

Worked as NDT Inspector / UT Technician in Teknica UK Ltd,Libya.

My Responsibility was corrosion monitoring on piping and plant equipments using ultrasonic flow detection. Conducted Magnetic Particle testing, Dye Penetrant testing on during their shutdown.

June 2008 to Feb-2009: NDT/ Welding QC/ Maintenance Inspector. Indian offshore rigs and platforms of ONGC.

Review sub-contractor quality systems documentation, such as NDT procedures, witness and conduct acceptance inspections on behalf of the project, active in implementation of the project's quality management system, review all welding procedures (WPS) and procedure qualification records (PQR) for acceptance, welders qualifications for compliance with project requirements, welding materials control.

NDT reporting, QC documentation works, Co-ordination to obtain the work permits and reporting the progress of maintenance works to my superior.

Dec 2007 to May 2008 : NDT Inspector in Links Middle east Technical Services, Abu Dhabi, UAE

Worked as NDT Inspector in Links Middleeast Technical services on Ruwais Refinery (TAKREER), Ruwais, Abu Dhabi

My Responsibility was corrosion monitoring on piping and plant equipments using ultrasonic flow detection. Conducted Magnetic Particle testing, Dye Penetrant testing on during there Hydro Cracker and Hydro Skimmer shutdown.

March 2007 to Sep 2007 : NDT/ Welding QC Inspector with Emirates Industrial Laboratory,

Dubai, U.A.E

Worked as NDT/ Welding Inspector in “AKER KAVERNER’’ Semi Submersible Drilling Rig (World Largest Drilling Rig) at Dubai Dry Dock.

Responsible of sub-contractor’s welding quality to follow the approved procedure and specification, to plan, co-ordinate, control and perform NDT inspection, Radiographic Film Interpretation, monitoring welder’s ability to control the rework percentage etc.

Well influenced on TKY joints’ UT inspection to the satisfaction of code and project specification.

Sep 2005 to Feb 2007 : NDT/ Welding QC/ Maintenance Inspector. Indian offshore rigs and platforms of ONGC.

Review sub-contractor quality systems documentation, such as NDT procedures, witness and conduct acceptance inspections on behalf of the project, active in implementation of the project's quality management system, review all welding procedures (WPS) and procedure qualification records (PQR) for acceptance, welders qualifications for compliance with project requirements, welding materials control.

Visual and UT inspection on welds and welded components to assess and locate the extent and nature of suspected defects, co-ordinate with the maintenance team to attend the reworks, stage inspection like dye penetrant check, magnetic particle inspection, UT lam check to help the maintenance team in order to minimize the rework.

NDT reporting, QC documentation works, Co-ordination to obtain the work permits and reporting the progress of maintenance works to my superior.

Aug 97 to Aug2005 : NDT / Welding QC Inspector with AL KHAJA PIH LTD, UAE & OMAN

Some of the prestigious Projects Worked:

C.C.C NEB Project Hameem, Abu Dhabi Worked us Welding Inspector at North East Bab Project.(ADCO)

Alba Expansion project, Equatorial Guinea, (West Africa) worked as NDT Inspector at Marathon EG Production Ltd.

Welding QC/ NDT Inspector in Technip-Al Japer JV 64”&24”water pipe line project Fujairah under the supervision of Bearue Verites.

UT Technician in Petrochemical project for Bechtel-Borouge in Ruwais, Abu Dhabi

UT Inspector in Nexen (Canadian Oxidental Petroleum Yemen), Canoxy, Yemen. My main activity was to monitoring of Corrosion on Plot piping and Plant Equipment using Ultrasonic Flaw detection.

OGD-I & II Habshan, Abu Dhabi Worked as NDT Inspector at CCIC-OGD – Phase I & II.

GPC/ NOELL IMAC, Abu Dhabi. Carrying out UT & MPI on welds of Pipes, Pressure vessels, Heat exchangers, Storage tanks etc.

MIS-Sharjah Jetty. UT & MPI Carried on rigs and platforms.

UT inspection of pressure vessels, Storage tanks, Heat Exchangers, columns on plot and off plot pipelines etc for Petroleum Development Oman Service, also well conversant with locations of all gathering stations, remote manifolds, production wells etc in south and north Oman.

UT Technician on Saipem CCC-JV 48” LNG upstream Gas Pipeline, Oman.

Dec 96 to Aug 1997 : NDT Inspector in CONAM Inspection on Oil & Gas Processing plant, PDO (Petroleum Development Oman), Oman, Muscat.

Responsible to plan, co-ordinate, control and perform NDT inspection, Radiographic Film Interpretation, monitoring and control welder’s ability. Also responsible for Corrosion monitoring on plot piping and plant equipment of Petroleum Development Oman (North and South Oman) Stations using ultrasonic flaw detection.

Feb 95 to Dec 1996 : Multi Discipline NDT Inspector with Al -Hoty Stranger Ltd, Saudi Arabia

Conducted magnetic particle testing, film interpretation, Ultrasonic testing of pressure vessels, boilers, heat exchangers, Columns, Structural, and projects and plants like Petrochemical, Chemical plant, Refineries, Offshore etc. Involved in dimensional checks of fabricated items, site Hardness checks and Project documentation etc.

Prestigious projects during my service hear are expansion project of SADAF Petrochemical, maintenance works on SABIC Petrochemicals, Saudi Arabia.

Yours truly,

Charles Stephan

Contact this candidate