Jay Matthew Slaughter (Matt)

**** *** **** ** ******, NC 28451

Cell: 910-***-**** Email: advwta@r.postjobfree.com SUMMARY:

EDUCATION:

Experienced Work Planner / Field Engineer in multiple disciplines on nuclear projects. Previous nuclear work in both operating nuclear power plants and nuclear construction projects. Complete understanding of nuclear safety culture and the importance of adhering to all NQA-1 standards. Associate of Applied Science, Nuclear Engineering Technology Cape Fear Community College

GPA 3.9 Graduated: July, 2014

Bachelors of Science, Sport Management/Physical Education Averett University

GPA 3.0 Graduated: May, 2009

EXPERIENCE: Nuclear Work Package Planner - Construction Work Planner Johnson Services Group – Vogtle Nuclear Site Units 3 & 4: 10/30/2017 – Present

• Identified improvement areas for planning team to push quality work packages to the field.

• Initiate Maintenance Work Orders To support Mechanical and Electrical Installation activities

• Updated Planning templates to mitigate errors and streamline processes for our planning team.

• Planning installation of welded supports in Containment and Auxiliary buildings

• Planning Electrical Installation Work Packages per ASME NQA-1 Procedures

• Write Work Instructions for Install of Electrical Equipment, Cable Tray, Supports, Conduit, etc.

• Provide training as needed to fellow electrical planners on specific processes and job duties.

• Utilize Maximo planning software and assist other planners as needed with planning processes.

• Coordinate with Design Engineering, Quality Control, Materials and Welding group.

• Review all Engineering Changes and Modifications affecting Electrical Installation Packages. Nuclear Work Package Planner - Construction Support Specialist Fluor – Vogtle Nuclear Site Units 3 & 4: 10/03/2016 – 10/27/2017

• Electrical Work Package Planning for Containment and Turbine Buildings Units 3 & 4

• Planning Electrical Installation Work Packages per ASME NQA-1 Procedures

• Initiate and develop Material Takeoffs for Nuclear quality commodities per design drawings.

• Write Work Instructions for Install of Electrical Equipment, Cable Tray, Supports, Conduit, etc.

• Provide training as needed to fellow electrical planners on specific processes and job duties.

• Utilize Maximo planning software and assist other planners as needed with planning processes.

• Coordinate with Design Engineering, Quality Control, Materials and Welding group.

• Review all Engineering Change paper and Modifications affecting Electrical Installation Packages. Nuclear Work Package Planner 2 - Construction Field Engineer CB&I MOX Services Department of Energy - Savannah River Site: 03/25/2016 – 09-15-2016

• Work Package Planning for New Nuclear Construction Project

• Build/Design Glovebox Installation Work Packages per ASME NQA-1 Procedures

• SME for Glovebox installation planning while assisting in leading fellow planners

• Provide training as needed to new Glovebox Planners on specific processes and job duties

• Generate and maintain Compare Reports for Glovebox Work Packages

• Coordinate with Quality Control, Design Engineering, Welding, and Materials groups

• Give additional review and oversight to all EC’s related to Glovebox installation modifications

• Schedule and coordinate Pre-Planning Meetings with all necessary work groups and staff

• Assist in designating and scoping locations for new equipment installation work packages

• Verify and Review Peers work packages for correctness according to all codes and standards

• Develop and track the scope for work packages being planned within the group.

• Maintain traceability of all Mechanical Planning Work Orders through Microsoft Access Databases

• Formulate and write installation procedures for civil and mechanical equipment installation Nuclear Work Package Planner 1- Construction Field Engineer CB&I MOX Services Department of Energy - Savannah River Site: 04/13/2015 - 02-12-2016

● Work Package Planning for New Nuclear Facility Construction Project

● Build/Design Glovebox Installation Work Packages per ASME NQA-1 Procedures

● Schedule and coordinate Pre-Planning Meetings with all necessary work groups and staff

● Review/Interpret engineering drawings, specifications and design documents

● Combine necessary Mechanical, Civil, & Electrical drawings to write work procedures

● Perform Scheduled Walk-Downs of As-Found Equipment & Room Locations

● Research and red line all associated ECR & FCR drawing Changes Nuclear Vessel Technician (Refuel Floor)

Granite Services GE: Entergy-River Bend: 03/09/2015 - 03/26/2015

• Assisted Refuel Floor in Reactor Reassembly/Latching & Unlatching of RPV Head

• Installation of Major Components within Reactor Cavity

• Demobilization of Refuel Floor Equipment to Outage Completion Nuclear Control Rod Drive/I&C Technician

Granite Services GE: Entergy-River Bend: 02/15/2015 - 03/26/2015

• CRD Receipt Inspection/Torque/De-torque/Camera & Communications Setup

• LPRM Prep/Drain Can Install & Flushing/LPRM Replacement /PIP Exchange

• Neutron Monitoring System Setup/SRM & IRM Detector Replacement

• Handling of Special Nuclear Material/ Verification & Tagging Under Vessel Nuclear Control Rod Drive Technician

Granite Services GE-Castle Hayne: 10/9/2014 – 03/26/2015

• Verified Correct Location that CRD Uncoupled Appropriately

• Removal/Install of Shoot-Out Steel and assist in drive exchange Under Vessel

• Torqued/De-torqued CRDM Bolts According to Site Procedure

• Performed Drive Inspections as Directed According to GE Procedure Nuclear Steam Generator Nozzle Dam Technician

Radium Incorporated: Southern Company-Vogtle: 9/15/2014 – 10/8/2014

• Nozzle Dam installation and verification in Locked High Rad area of Steam Generator.

• Safely and efficiently performed Nozzle Dam removal in dose rate area of 6.7 Rem/Hour

• Assisted team in platform support while performing nozzle dam work safely and effectively

• Performed camera verification support ensuring diaphragm seal and all bolts fastened correctly

• Decontamination of all nozzle dam equipment safely and effectively. Decon Tech/Facility Maintenance/Roving Fire watch

BHI Energy/Bartlett: Duke Energy-Brunswick: 2/18/2014 - 8/26/2014

• Assist in various maintenance duties around the Brunswick plant

• Dress out properly in PC’s while entering/exiting contaminated areas

• Safely perform hourly watches via NFPA section 805

• Inspect and operate fuel truck within the protected area as directed

• Refueling of all fuel cells and compressors on site during outage NUCLEAR CLASSES

Nuclear Reactor Systems, Nuclear Reactor Theory, Hydraulics, Pneumatic, Mechanisms, Automation & PLC, Instrumentation, Industrial Wiring, Industrial Safety, DC/AC Electrical Theory, Metallurgy, Welding, Quality Control, Physics-Mechanics, Physics-Electrical & Magnetism, Machine Processes, Non-destructive Testing

MANAGEMENT/ BUSINESS CLASSES

Principles of Management, Business Communication, Public Speaking, Human Communication, Principles of Accounting I & II, Microcomputers and Application Software, Business Ethics STRENGTHS: Strong nuclear safety practices, strong mechanical aptitude, basic electrical knowledge, proficient civil and mechanical nuclear planning, organized, accountable, determined, positive attitude, quick learner, strong work ethic and problem-solving abilities, good at multi-tasking, effective communication skills, work well as a team, getting job done safely while driving results. SKILLS: Coordinating and planning nuclear work packages, reviewing and interpreting engineering change documents, navigating various nuclear planning software systems such as: Maximo Planning Software, Asset Suite 8.0, Microsoft office, P6 Scheduling Software, and Smart Plant. Control Rod Drive Maintenance work under vessel, Refuel Floor vessel tech processes, use of impact wrenches, torque wrenches, and Lifting and rigging equipment. Attention to detail while performing all work duties and inspections in or out of the field.

HONORS: Promoted to Nuclear Work Control Planner 2 position at Savannah River Site due to leading abilities within my group to drive further results. Recently acknowledged for multiple safety observations during walk downs of plant equipment. I recently developed a new safety tool to be utilized by all employees on site. The submitted idea is under review with upper management. Other Honors include: Presidents List, Dean’s List, College Athlete, Phi Kappa Theta, Honors Society, Nuclear Tech Club, Academic Honors Student, Averett Baseball All-Academic Team, and Academic Scholarship.

CERTIFICATIONS: Rad Worker Training, Respirator, Delta Suit, fall protection, Confined Space, First-Aid and CPR certified.

Contact this candidate