LISA LEMON DESIGNER / DRAFTER & PROJECT COORDINATOR 713-***-**** MOBILE

advvcq@r.postjobfree.com

Houston, TX 77082

Page 1 of 5

** ***** ** * *** Design Drafter with extensive experience in the creation of drawings for pipe supports, piping plans, sections and details for launchers/receivers, gas metering and gas compressor facilities. Additionally, I have prepared drawings for survey, commercial/residential property plats, civil and architectural drawings. I’m a hard-working team player, self-starter who learns quickly with minimal supervision. EDUCATION

Houston Community College

12/2004 Associates in Drafting/Cad Drafting 05/2011 Certificate in Pipe Drafting 08/2009 Certificate in PDMS

COMPUTER SKILLS

• AutoCAD 2004-2018 & AutoCAD 2009 3D

• AutoCAD Map 2008

• AutoCAD Land Development 2007

• MicroStation V8XM & V8i

• Solid Works 2010-2011 CADWorx 2016

• PDMS 11.6 Cadworx 2012-15

• Microsoft Excel AutoCAD Plant 3D

• Microsoft Office TWIC CARD

EMPLOYMENT HISTORY

VMC Group Houston, Texas 01/2022- Present

Engineering Administrator

• Work Closely with the Engineering Manager on projects

• Reception of projects; review project inputs

• Oversee the operations of the Engineering department

• Provide administrative support to the Engineering Manager

• Manage the Engineers

• Communicate with Engineering department to keep everyone on board about any changes

• Create and send out weekly reports on projects

• Provide daily update to Engineering Manager

• Assign projects to Engineers

• Conduct daily meetings with Engineers and Engineering Manager to keep everyone up to date on current projects.

• Create folders and upload projects and information.

• Logging in the project information on sales orders, purchase orders into the Excel spread sheet and engineering dashboard

• Request additional engineering information on current jobs.

• Point of contact for all correspondence between rep and engineer.

• Update data base daily in Excel spread sheet

• Invoice Projects

• Facilitate P.E. and S.E. stamps

• Review and Send out Completed projects

• Field phone calls from customers

Horizon Survey Cypress, Texas 04/2020- 12/2021

Mapping Specialists I

• Create survey plats utilizing Microstation

• Calculate mapmaking information from field notes

• Read calculations

• Create drawings of wells and well pads utilizing Microstation LISA LEMON DESIGNER, DRAFTER, & PROJECT COORDINATOR PAGE 2 OF 5 C E Dahl Magnolia, Texas 06/2018-03/2020

Piping/Mechanical Designer I

• Create pressure vessels utilizing AutoCad

• Revise pressure vessels utilizing AutoCad

• Read calculations

• Create and/or Design Ladders & Platforms utilizing AutoCad Accelerated Process Systems Group, Inc. Tomball, Texas 10/15-06/2018 Piping/Mechanical Designer I

• Created and revised P&ID drawings utilizing CadWorx 2014 &2016

• Created and revised Process flow diagram drawings utilizing CadWorx 2014 & 2016

• Revised drawings to reflect engineering changes utilizing Cadworx 2014 & 2016

• Created AS-Built drawings utilizing Cadworx 2014 & 2016

• Created 3-D model utilizing Cadworx 2014 &2016

• Created mechanical drawing per Project Engineer’s sketches utilizing Cadworx 2016

• Created Sections and Details utilizing Cadworx 2014 & 2016

• Revised piping plans & piping sections on skids & spool drawings utilizing Cadworx 3D 2016

• Revised AS-Built electrical drawings utlilizing Cadworx 2016 Willbros Group, Inc. Katy, Texas 04/2014-09/2015

Piping/Mechanical Designer II

• Create and revise P&ID drawings utilizing CadWorx 2014 & 2015

• Create and revise Process flow diagram drawings utilizing CadWorx 2014 & 2015

• Revised drawings to reflect engineering changes utilizing Cadworx 2014 & 2015

• Create AS-Built drawings utilizing Cadworx 2014 & 2015

• Revise 3-D model utilizing Cadworx 2014 &2015

• Create mechanical drawing per Project Engineer’s sketches utilizing Cadworx 2015

• Create Sections and Details utilizing Cadworx 2014 & 2015

• Revise piping plans & piping sections on meter stations in As-built utilizing Cadworx 3D 2015

• Revise AS-Built electrical drawings utlilizing Cadworx 2015 Axiall (Turner Industries) La Porte, Texas 06/2013-04/2014 Plant Piping Designer/Drafter (Contract)

• Create and revise motor wiring diagrams utilizing AutoCAD 2013

• Create and revise motor schematics utilizing AutoCAD 2013

• Revising P&ID’s utilizing AutoCAD 2013

• Distribute revised P&ID’s to all plant supervisors

• Revising electrical drawings utilizing AutoCAD 2013

• Revising terminal strip for Foxboro I/A system (electrical) utilizing AutoCAD 2013

• Create and revise loop drawings (electrical) utilizing AutoCAD 2013

• Revise Isometric drawings utilizing AutoCAD 2013

• Revise and update all plant area drawings utilizing AutoCAD 2013

• update electronic files and filing cabinet with current drawings

• Update P&ID log sheet and work order log sheet utilizing Excel

• Walk-Downs through the plant; Sketch up drawing on paper and then create iso in autoCAD 2013 LISA LEMON DESIGNER, DRAFTER, & PROJECT COORDINATOR PAGE 3 OF 5 UniversalPegasus International Houston, Texas 01/2013-06/2013 Piping Designer/Drafter (Contract)

• Participating on the Spectra Energy Partners Project underground pipeline in Tennessee, Kentucky, Virginia and West Virginia.

• Revising P&ID’s on Spectra Energy Partners Project utilizing Microstation V8i.

• Creating Sections and Details utilizing Microstation V8i.

• Creating Site Plans using surveys and plot plans utilizing Micorstation and AutoCad.

• Revising Electrical Drawings utilizing Microstation V8i.

• Revising Plot Plans utilizing Microstation V8i.

• Creating Conduit Cable Schedule in Excel spread sheet and inserting into a Microstation Drawing.

• Adding Material Bubbles to Piping Plans and Piping Sections and Detail Drawings utilizing Microstation V8i.

• Changing Plot Plans from a single line drawing to a double line drawing utilizing Microstation V8i.

• Changing Plot Plans from a double line drawing to a single line drawing utilizing Microstation V8i.

• Revising drawings to reflect engineer’s changes utilizing Microstation V8i.

• Revising flow control and meter skid drawings utilizing Microstation V8i.

• Creating bill of material lists in Excel Spread sheet and inserting it in a Microstation drawing. Worley Parsons Houston, Texas 01/2012-01/2013

Piping Designer/Drafter

• Participated on the Mont Belvieu-Shell underground pipeline project.

• Designed P&ID’s on Mont Belvieu Shell Project utilizing Cadworx 2010 P&ID.

• Revised P&ID’s on P-Ranch Shell underground pipeline project utilizing AutoCAD 2007 & 2012.

• Revised Well Pad drawings on P-Ranch Shell Project utilizing AutoCAD LCR.

• Participated in the BP-Junpier off-shore oil rigs project Mohogany A,B,C.

• Revised P & Id’s utilizing AutoCAD 2007.

• Revised drawings to reflect engineering changes utilizing AutoCAD 2007.

• Designed Isometric drawings using AutoCAD 2007.

• Participated in the BEP and Review Phase of the Refineria Del Pacifico (RDP) Project of piping management consultants of the EPC Companies (SKA/Power/U-Biz, Shaw Group, Techno consult, Foster- Wheeler, Sargeant and Lundy, and Linde).

• Created Excel spread sheets to maintain documents utilizing Excel 2010.

• Checked and review Drawings to make sure they have met the standards for this project.

• Commented and mark up drawings if they have not met the standards on this project.

• Maintained Excel spread sheets to reflect current documents received/sent utilizing Excel 2010.

• Downloaded drawings from Project website and upload to WorleyParsons J drive.

• Researched and retrieve any document/drawings needed via SK Project website & WoleyParsons J drive.

• Plotted drawings and give them to the Lead Designers to review.

• Stamped the completed drawings and retrieve Managers signature of approval to send back to client.

• Scanned and e-mail documents/drawings to the client.

• Participated in PDMS training class at WorleyParsons.

• Edit the overall plot plan of the RDP Project utilizing AutoCAD 2007.

• Revised drawings to reflect engineer’s changes.

• Created an excel spread sheet of units completed utilizing Excel 2010.

• Created drawing books for 50 units for the Leads to review.

• Created drawing list utilizing Excel 2010.

LISA LEMON DESIGNER, DRAFTER, & PROJECT COORDINATOR PAGE 4 OF 5 Technipower (Amistco) Houston, Texas 11/2011-12/2011 Mechanical Designer/Drafter (Short-term contract)

• Drafted separation products utilizing Inventor.

• Revised drawings to reflect engineering changes utilizing Inventor.

• Created material take-off drawings for shop utilizing Inventor. Select Staffing (Pro Plus Inc.) Houston, Texas 08/2011-10/2011 Piping Designer/Drafter (Short-term contract)

• Drafted plot plans utilizing AutoCAD.

• Drafted Sections and Details utilizing AutoCAD.

• Created Bill of Materials utilizing AutoCAD.

• Revised Drawings to reflect engineer’s changes utilizing AutoCAD.

• Drafted piping area plans utilizing AutoCAD.

• Drafted Single line piping area plans into two line piping area plans utilizing AutoCAD. Bowden Survey Houston, Texas 07/2010–08/2010

Civil Designer/Drafter (Short-term contract)

• Drafted residential surveys from data provided by field crew sketches using AutoCAD 2004 and Land Development Desktop.

• Drafted property lines and adjoining lots using subdivision plats.

• Set drawings to scale and layers, plan and profiles using model space as well as rotating houses onto property lines.

• Conducted conventional and Computer aided drafting (CAD) as applied to engineering architectural and civil drawing according to field notes created by surveyor.

• Added easements and building lines, power lines according to subdivision plats

• Set rods and adjoiners according to points.

• Created Slab drawings.

• Labeled and hatched surveys using inserts and blocks and showed ties from house/garage to property line.

All- States Technical (WSI) Houston, Texas 09/2009 –10/2009 Civil Designer/Drafter (Short-term contract)

• Drafted a Project in AutoCAD 2009 for WSI to take to Japan to use in a Presentation.

• Drafted/Revised Drawings in AutoCAD 2009 for the planned service center for coiled tubing that was planned for Red Deer, Alberta, Canada.

• Drafted the property and added a Building, a Parking lot and a Drive-way with Main Street.

• Created a 3-D drawing in AutoCAD 2009 of the Warehouse in back of the office Building. Energy Management & Services Co. Houston, Texas 02/2008 –06/2009 Pipe Designer/Drafter

• Drafted detailed P & Id’s for conveying engineering information for construction utilizing AutoCAD.

• Revised P & Id’s

• Utilized X-references to upload into drawings.

• Created Spool Drawings utilizing AutoCAD.

• Created Sections and Details utilizing AutoCAD.

• Created Piping Area Plans using X-references utilizing AutoCAD.

• Revised drawings to reflect engineering changes utilizing AutoCAD.

• Revised the Main Drawing utilizing AutoCAD 2009 3D to reflect Engineers changes. LISA LEMON DESIGNER, DRAFTER, & PROJECT COORDINATOR PAGE 5 OF 5 Piping Technology & Products Houston, Texas 09/2006 – 2/2008 Mechanical Sr. Drafter /Designer and Job Manager/ Coordinator

• Drafted detailed Pipe Support drawings for conveying engineering information for construction utilizing AutoCAD.

• Revised drawing to reflect engineering changes utilizing AutoCAD.

• Created Pipe Supports and expansion joints utilizing Inventor.

• Downloaded and Uploaded drawings via the internet web site.

• Coordinated drawings interface with various engineering disciplines within the company and with project cliental.

• Shipped out pipe supports after manufacturing has been completed.

• Maintained the data base of current project drawing files utilizing excel spread sheets.

• Maintained the weekly schedule ensuring drawings and supports are produced on schedule.

• Interfaced with clients via conference calls to obtain project solutions.

• Created material take-off for pipe supports drawings for shop.

• Revised the main Drawing to reflect the Engineers changes utilizing AutoCAD 2004 3D. Westar Land Surveyors, Inc. Alvin, Texas 06/2006 - 09/2006 Civil Drafter

• Drafted residential surveys from data provided by field crew sketches using AutoCAD 2004 and Land Development Desktop.

• Drafted property lines and adjoining lots using subdivision plats.

• Set drawing scale, layers, plan, & profiles using model space and rotating houses onto property lines.

• Conducted conventional and Computer aided drafting (CAD) as applied to engineering architectural and civil drawing according to field notes created by surveyor.

• Added easements and building lines, power lines according to subdivision plats

• Set rods and adjoiners according to points.

• Plotted and labeled rods (scale to fit).

• Labeled & hatched surveys using inserts and blocks and showed ties from house/garage to property line. Weisser Engineering Katy, Texas 03/2006 - 06/2006

Civil Drafter

• Drafted commercial surveys and telephone easements for phone and cable (SBC) lines using AutoCAD and Land Development Desktop.

• Researched and prepared residential and commercial deeds. AKA Staffing (Tri-Tech Surveying Co.) Houston, Texas 10/2005 - 03/2006 Contract Civil Drafter

• Drafted residential surveys from provided by field crew sketches using AutoCAD 2004 and Vizisoft.

• Drafted Slab Elevation Exhibits from field crew notes using AutoCAD 2004 and Vizisoft. Precision Surveyors, Inc. Houston, Texas 4/2005 - 7/2005 Civil Drafter

• Produced residential surveys from field crew notes using AutoCAD 2004 and Land development desktop.

• Researched and prepared residential and commercial deeds.

• Drafted property lines and adjoining lots using subdivision plats.

• Set drawings to scale and layers, plan and profiles using model space.

• Conducted conventional and Computer aided drafting (CAD) as applied to engineering architectural and civil drawing according to field notes created by surveyor.

• Added easements and building lines, power lines according to subdivision plats.

• Set rods and adjoiners according to points.

Contact this candidate