Justin Bush

Lanark, IL

advln0@r.postjobfree.com

563-***-****

Authorized to work in the US for any employer

Work Experience

Line Leader/Machine Operator

Maclean-fogg component solutions

March 2018 to Present

As a line lead I was in charge of a row of machines. My main objectives we're to keep machines running

quality parts to meet customer and operator needs. I would arrive at work and receive a pass down

from the previous shift of any issues that needed addressed and how the line ran overall. Throughout

the night I would respond to operators issues when I had the opportunity to do so. My job was to fix

issues in. A timely manner. I would fix what I could fix before calling set up or maintenance to assist

me. I also worked with the engineering staff to fix issues that required their attention. Accomplishments

I learned a large amount about machine functionality, adjusted sensors and switches got certified to

reset circuit breakers on Hoppers, stacker tables, coolant pumps and any other applicable situations.

I replaced hopper belts, and chains and learned to adjust them properly. I helped replace cylinders

adjusted dead stops replaced tool bars and taught them off the part. I removed Collets and locators

and cleaned them and put them back on the machine. I earned a certificate in a fanuc robot class to fix

issues with the robot how to write programs and troubleshoot issues with the robot and overall basic

robot functionality.

CNC Operator/Machinist

MacLean-Fogg - Savanna, IL

November 2014 to March 2018

Responsibilities

Each day I would arrive at work at 2:45 for a meeting for my assignment for the day. I would then

head to my machine and do all necessary checks to make sure machine was in good working/running

condition. I would do checks such as, fluid levels (hydraulic, waylube, coolant) I would make sure that

all safety guarding was in place and the hopper was full of the correct parts for the job I was running,

I would also ensure that all paperwork at the machine and the hopper matched. I would fill out my

inspection sheet for each part dimension to make sure the dimensions were being cut properly. if the

dimensions were incorrect I would shut machine down and fix whatever issue there may have been,

throw out all the non conforming parts and restart the machine. At the end of shift I would make sure

the parts in specification of the blue print top of all the fluids and give the pass down to the incoming

operator.

Grain cart driver

Fink family farm - Lanark, IL

November 2013 to November 2013

Responsibilities

Each morning i would come to work and start the tractor if needed and let it warm up for about 30

minutes. I spent the majority of the time following the combine around while it picked corn. When

the combine was full i pulled along side and he dumped his load on me. When my grain cart was full i

proceeded to dump it into a semi trailer

Accomplishments

i helped the farmer get his crops out of the field in a timely manner Skills Used

i demonstrated following orders and driving a tractor Grain BIn Manufacturer

Meador's Ag Service - Lanark, IL

August 2013 to November 2013

Responsibilities

Each morning upon arrival i would help make sure the work truck was loaded with all the materials we

needed for the job. When i arrived at the job site i would help get the equipment unloaded and ready

to start working. I pushed bolts through corrugated steel sheets that made up the shell of the grain

bin. I went around with a wrench and helped tighten all the bolts up. I hung ladder sections on the

outside and inside of the bin. I hung air piping along the top and side of the bin. I used a torch to cut

holes and trim items to fit in their correct spots. I put air vents in the roof. I helped put anchor bolts

in the cement base to keep the bin centered on the pad. I cleaned up the work area after the job was

completed

Accomplishments

I helped the company get the bin built by the deadline. I helped keep people motivated to finish the

job. I learned a new trade and engineered some items to make them workI Skills Used

I worked well with others. I took orders from my supervisor. I worked a lot with my hands. i used common

sense to help finish the job with minimal problems Laborer

CS EXCAVATING - Chadwick, IL

March 2013 to July 2013

Responsibilities

When I arrived at work I would help load the truck with the equipment we needed. I did minor dirt

moving using an excavator. I occasionally used a level rod and laser to keep grade while the excavator

operator dug and smoothed out the holes we dug for swimming pools, house burial, silo tear down

and the start of putting drainage tile in the ground. I fed drainage tile into the tile plow and made sure

that it was the correct depth in the ground. I put end caps on to keep the dirt out. I helped install stand

pipes at the end of the tile line for the moisture to easily sink into the ground and drain out the tile. I

helped load and unload the heavy equipment for the start and end of the job Accomplishments

My presence made it so the Bulldozer or excavator operator could concentrate on only one aspect

while i helped direct him and keep him moving to get the job done Skills Used

I used hand tools such as shovels, pliers, utility knives and some ingenuity to accomplish the task. I

operated an excavator to help dig dirt. I took orders and worked alongside other people Instrument Man

Compass Land Surveying - Aurora, IL

April 2012 to November 2012

Responsibilities

I loaded the truck each morning with supplies and equipment that we needed to start or continue the

job. When we arrived in the morning I would set up the robotic laser so we could begin. I would do a

check after each set up to make sure that the laser was working correctly and that we had the correct

elevations and height measurements. I located points on a grid using an electronic level rod to draw a

geographical map of city streets, rock quarries, county and state roads, corn fields. I located property

corners and boundary markers so we could find where one property started and the next began. On

construction sites i pounded lath bored in the ground to mark the location of new structures such as

sewer manholes, gas piping, electric lines, light poles, sidewalks, grade marks so that they were all

built to correct dimensions. I put metal pipes in the ground to mark where the building corners were

supposed to be. we came back in after everything was built and checked it to make sure we did our

jobs correctly and that the construction company did the same Accomplishments

I learned a new trade. I took orders well i worked with a couple different people and couple different

styles of working. you get to see how different people do the same job differently. Skills Used

I read tape measures. i worked with my hands and used a lot of people skills i read maps and took

notes on what had been done that day

Painter/Prep

Sewer Equipment Company of America - Chadwick, IL

December 2007 to March 2012

Responsibilities

when i arrived in the morning i would learn from my supervisor the work that needed to be done for the day or the week. I then talked amongst the other employees and figured out who was going

to do which tasks. i washed parts with soap water and an acid that etched the metal so the paint would adhere to the metal better. i hung parts on racks so they would be easier to wash prep and

paint. I used a dual action sander to remove metal burrs and any other perfections for better paint

appearance. I used an epoxy metal filler to fix anything that I couldn't get with the sander. i loaded

and unloaded parts painted and unpainted off of shelves and delivered them to the desired locations

throughout the company using a forklift and wagon. i painted truck and trailer frames along with the

parts on the racks. I did a little bit of welding and some electrical wiring. i helped build and repair some

of the machines.

Accomplishments

I learned to paint and take pride in my work. i worked with many different employees and worked as

as well as I could with them. i motivated people to get their work as well as motivating myself Skills Used

I worked with my hands a lot. i used power tools i drove forklift i read tape measures i use a power

washer and used a lot of self respect to make sure i did what i had to do and that it was done right

Education

Diploma

Milledgeville High school - Milledgeville, IL

2003 to 2007

●

Contact this candidate