Anthony Juliano Paras

Home Address: Ritaj DIP * Dubai, UAE

Mobile phone: +971*********

Email: adv1qw@r.postjobfree.com

CAREER OBJECTIVE

To join an organization where I can use my skills and utilize the knowledge I gain in order to enhance my potentials and abilities to work as professional individual and meet profession. Special Skills and attributes

Familiar with International Standards such as IEC, IEEE, with local authorities such as ADDC, DEWA and Electrical System Design.

Experience in the development of Single Line Diagram, design specifications and data sheet. Has a wide experience in the development of electrical layout like Cable tray, Power, Grounding, Lighting and Substation equipment layout.

Preparation, coordination and control of detailed engineering and design schedule for work category assigned and routes all queries for client, vendor and subcontractor.

Effective leadership and inter-personal skills in handling various concerns in group activities and project. Team-player, goal-oriented and able to work well under pressure

Facilities Management and knowledge in EHS

PROFESSIONAL EXPERIENCE

With Valid UAE Driving License-Lic no. -2396013

Society of Engineers- 2017/47280 member

Dubai Municipality approved Engineer for

1. Electro-mechanical Installation –ITST2015-000937 2. Electrical Fittings-ITST2017-004324

General Electrical Engineer – Project Engineer

Gulf Drug LLC/ Hospinorm Maintenance Management LLC-December 2021 to Present

Check and review Project Specification

Supervise work and installation for Electrical and low voltage system(CCTV, Emergency Lighting, Fire Alarm,)

Facility Management, MEP Operation and Maintenance of Jebel Ali Emergency and Trauma Center

Electrical QA Engineer

Fibrex Contracting LLC – June 2021 to November 2021

Check and review Project Specification

Check and prepare material submittal as per project requirements

Prepare material and work Inspection request.

Supervise work and installation for Electrical and low voltage system(CCTV, Home automation, Fire Alarm)

General Electrical Engineer

Gulf Drug LLC – Al Barsha Dubai, UAE-February 2017-2021

Submission of all shop drawings and coordinate as per Production drawing of Hospital,Modular Operation Theater, Pharmacy and Cleanroom

Submission for the Material approval of system and equipment.

Supervision of Equipment installation, panels, monitors/viewer, surgical and anesthesia pendant Operating light, laminar air flow and all Modular Operation Theatre Equipment.

Coordination with the Main contractor and Consultant as per site condition.

Testing and commissioning for all Medical Equipment.

Operation and Maintenance works for existing/finish projects. Projects

Ruwais Hospital with electrical and HVAC works for IV Room-Ruwais Abu Dhabi

Burjeel Daycare Hospital with electrical and HVAC works for MOT – Al Reem Island, Abu dhabi

Burjeel Royal Hospital with electrical and HVAC works for MOT and IV Rooms– Al Ain, Abu Dhabi

Tawam Hospital for PICU– Al Ain, Abu Dhabi

Dubai Hospital for Medication rooms and Wall cladding- Dubai, UAE

Burjeel Specialty Hospital For MOT – Sharjah, UAE

Jebel Ali Emergency and Trauma Center - Head of Facilities and Management

Shiek Khalifa Hospital- Fujairah

General Electrical Engineer – Dubai Municipality Approved Engineer Tadmor Horizons Contracting LLC

Al Nahda Dubai, UAE- April 2015- January 2017

• Prepare electrical drawings/design and load calculations.

• Coordinated projects with other departments, contractors and consultants.

• Preparation of Bill of quantities and detailed estimates for electrical works systems.

• Manage project schedules and budgets, and obtain permits for operations.

• Make engineering calculations in connection with field and office assignments.

• Preparation and review of material for Consultant Approval for Electrical Power System including Low current systems(CCTV, Structured Cabling, Central Battery/Monitoring System, Fire Alarm, SMTV, Access Control).

• Prepare requests for proposals and evaluate bids. Perform highly specialized design, research, and analysis on a project-by-project basis and advise on code compliance. Projects

• G + 1 + Service Block + Majlis - Al Kawaneej 2, Dubai

• G + 1 + Service Block – Al Warqaa 1

st

Dubai

• G + Mezzanine Sheds ( 22 Units) – Ras Al Khor Dubai

• G + 1 + Service Block – Palm Jumeirah, Dubai

• G + 1 + Drivers Block – Al Barsha 1, Dubai

• Basement + G + 5 + Gym Floor - al Warqaa 1

st

Dubai.

• G + M Warehouse (3 units) –Ras Al Khor Dubai, G + F Warehaouse (22units) –Ras Al Khor Dubai

Electrical Engineer/Consultant

Abdallah Al Saif and Partners for Studies and Engineering Consulting/ Al-Rajhi for

Engineering Consultations. – Taif, Kingdom of Saudi Arabia Ministry of Defence and Aviation – General Directorate of Military Works 2013-Jan 2015

Review and approved all shop drawing based on the given standards and site requirements.

Review and approved equipment and materials based on the specifications, drawing and site requirements. Ensure that all works are done based on standards and safety manner.

Monitor the progress of work based on the time schedule.

Conduct testing and commissioning of installed electrical and mechanical equipment.

Conduct punch list, review as-built plan and Operation and Maintenance before the final turnover of the project.

Project

Girls Secondary School

Armed Forces Rehabilitation Center Hospital

Construction of Gate and Support Services building for the Armed Forces Rehabilitation Center, Gynasium Project.

Extension Al-Hada Military Hospital

Electrical Engineer/Technical General Supervisor-Mutair Al-Fahmi Contracting Corporation at Ministry of Petroleum and Mineral Resources – Riyadh KSA( 2010-2012) – Ministry of Petroleum and Mineral resources.

Supervise for the O and M of all Electrical and Mechanical Equipment.

Supervise for the renovation and construction of expansion Project of the building.

Prepare and ensure that all schedules are done in timely manner.

Resolve all the issues that arise from all of the system. Lead Technician (Electro-Plating, Thermal Bonding and Sputtering Process ) Technical Supervisor/Trainer (Electro-Plating, Thermal Bonding,Sputtering, Electrical Testing/ August 2006–2010

Sunpower Philippines Manufacturing Ltd. Inc

100 East Main Ave. LTI, Binan, Laguna

Electro-Mechanical Engineer

Ignacio-Reyes Contracting and Management Inc.(2004-2006)

B + G + 5 College of Engineering and Technology Building – De La Salle University

34.5kV Transmission Line/Substation - De La Salle University Personal Background

Date of Birth : February 14, 1982

Civil Status : Married

Citizenship : Filipino

Education Background

1998 to 2004 Bulacan State University

Bachelor of Science in Electrical Engineering

1994 to 1998 Pampanga Colleges

High School

Training and Seminars Attended

Training

SPM Ltd. Inc

Coaching 101, The Mark of a Leader: Leadership Dynamics, Motivation and Discipline, Management of Change

Time Management, Effective Customer Management, Opportunity finder,Communication Skills 101

Train the Trainer( Training Cycle), 8D workshop, Accountability – Taking responsibility of your job

Chemical Spill Drill Training, Environmental Management System(ISO 1004-2009)

First Aid Training(PNRC) – Red Cresent counterpart, Basic Life Support(PNRC) – Red Cresent counterpart

Advance Fire Fighting Training – Bureau of Fire Protection, Industrial Safety

Bolts and Nuts, Macromedia Flash, Basic PLC, Advanced PLC, Advanced Electro- Pneumatic

AutoCad 2008

MICROCADD Technology

SM Pampanga

MIRDC Instrumentation and Control Process NC II - Ceritified Technical Education and Skills Development Authority (TESDA)

Contact this candidate