Resume

Venkata Satya Kameshwar Nuti (Kamesh), P.E

****, ********** ****,

Katy, TX-77494-6227

Email: aduyi9@r.postjobfree.com

Phone: 713-***-**** (Cell)

Date of Birth: September 18th, 1970

CIVIL - STRUCTURAL ENGINEER

SUMMARY

More than twenty six years of Structural engineering experience in the analysis and design of various types of foundations and Steel and Concrete structures in different Refinery process units, Gas Processing plants, Hydrogen plants, Fertilizer plants, LNG Plants etc. Comprehensive knowledge of design standards and codes. Demonstrated abilities include involvement in intra departmental activities, dealing and coordinating with clients & vendors and assistance in the preparation of various project proposals. SOFTWARE:

Knowledge of Design packages and Computer skills include proficiency in Staad.Pro, RISA, Foundation 3D, Mat 3D, DS Anchor, RISAFoundation, Smart Plant Review, AutoCAD drafting package, MS Office, Frameworks Plus/Microstation and LFM (Use of Laser scanned modules) for existing plants.

EXPERIENCE – 26 years

05/2013 – Technip Energies, Houston, TX

Senior Principal Engineer, Civil and Structural

EXXONMOBIL – LA BARGE CARBON CAPTURE PROJECT (CCP-1), LA BARGE WYOMING, Collaboration with SAULSBURY for Construction. The Project site has mainly 3 areas :

1. Shute Creek Treating Facility (SCTF)

2. CO2 Sales Area

3. Injection Well Site

Working as Lead for CSA discipline on the Project. The Engineering and Drawing production are being supported by the Technip Bogota, Colombia office. Most of the Piperack Structures are Modules.

Compressor House Structure is by SAULSBURY (sub-contracted) and all Foundations on Drilled Piers are in our scope.

Some small Modules are supported on Existing Piperack Structures for which the adequacy of existing structure was checked.

Resume

SEMPRA - ENERGIA COSTA AZUL PHASE I LNG PROJECT, ECA LNG West Coast of Baja California Norte about 32 km north of Ensenada, Mexico Located in Seismic Design Category “D”.

Analyzed and Designed the Piperack and Process Structures and foundations in the Liquefaction Area.

Analyzed and Designed the PCHE (Pre Cooled Heat Exchanger) Structure – the structure was 159 ft tall and it had platforms at 18 different elevations with access to two vertical vessels supported on foundation.

TechnipFMC, Houston, TX

Principal Engineer, Civil and Structural

BEAUMONT LIGHT ATMOSPHERIC DISTILLATION EXPANSION (BLADE) PROJECT, ExxonMobil, Beaumont Refinery, BEAUMONT, TEXAS Deputy Lead for the Civil and Structural Engineering Activities including preparing SOW, RFQ, MR and SR’s for various packages, Preparing Design Criteria and Project Specs and Standards, Coordinating with TechnipFMC Delhi office regarding foundation and structural design, checking and stamping calculations and drawings. Most of the structures were either Modules or Skids, fabricated offshore and transported by sea to the site.

LAKE CHARLES CHEMICAL PROJECT, CRACKER & EOEG (Ethylene Oxide Ethylene Glycol), SASOL CHEMICALS (USA) LLC., WESTLAKE, LOUISIANA FIELD ENGINEER, WESTLAKE, SASOL CHEMICALS (USA) LLC. : Performing Field Engineering duties including taking care of RFI’s, queries by the contractor, finishing up with misc. supports and numerous other activities. Checking and preparing foundation and structural calculations for equipments and Piperack and Process structures submitted by TP Delhi office for the Process, Storage and Flare Areas.

Coodinating with Technip Delhi on various issues for a smooth & seamless flow of information and issue of documents for construction. Preparing Piling, Concrete and Steel MTO’s, Processing RFI's

USGC PETROCHEMICALS PROJECT, CHEVRON PHILLIPS CHEMICAL CO., OLD OCEAN, TEXAS

Area Lead for the OSBL areas comprising of Vacuum unloading, mPE and ADL Loadout, Hexene and Isobutane offloading, Cooling tower, Hexene and Isobutane storage tanks etc. Coordinating between the Mumbai and the Houston offices. Resume

GAS PHASE R3 PROJECT AT JOFFRE, ALBERTA - CANADA FOR NOVA CHEMICALS CORPORATION

Design of Blender Structure and foundation & Blower foundation. Design of Purge Bin Structure and other miscellaneous pipe supports. 10/2011 – 05/2013 BECHTEL CORPORATION, Houston, TX Senior Structural Engineer

Projects on which I worked are –

SABINE PASS LNG LIQUEFACTION PROJECT (CAMERON PARISH, LOUISIANA) – ISBL Area

Design of Cryo Rack and preparation of STAAD template for finite element analysis for mat foundations

CHEVRON - PASCAGOULA BASE OIL PROJECT – Resid Desulphurization Unit Design of Pipe rack and Valve platform structures and foundations 08/2010 – 09/2011 CB & I, Houston, TX

Senior Civil / Structural Engineer

Projects on which I worked are –

DOMINION TRANSMISSION INC. – Natrium NGL Recovery and Fractionation Facility, West Virginia

The various foundations and structures on which I worked have been listed as follows:

- Design of Pipe rack and Cable Tray Rack Structure and foundations, Deethanizer Structure, Amine Rack & Dehydration Structure and their foundations

- Design of foundations for Towers, Vertical vessels, Exchangers

OCCIDENTAL OF ELK HILLS INC. – Cryogenic Gas Processing Plant, Elk Hills Field, Bakersfield, California

The Elk Hills Gas Processing Facility is a cryogenic gas processing plant equipped with inlet compression, gas treating, dehydration, NGL recovery and liquids fractionation, storage and product pipeline.

The various foundations and structures on which I worked have been listed as follows:

- Design of Pipe rack and Cable Tray Rack Structure and foundations, Deethanizer Structure, Amine Rack & Dehydration Structure and their foundations

- Design of foundations for Towers, Vertical vessels, Exchangers and horizontal vessels, Block foundation for Compressors, Pumps & Skids

Resume

YEMEN LNG – Cryogenic Gas Plant, ALIF CPU Gas Facilities Checking the adequacy of the Modular Structures, Air Cooler structures & Pipe rack structures and their foundations for fireproofing load in RISA 3 and design of MPS and Cable Tray supports.

04/2007 – 11/2009 Technip USA Inc., Houston, TX

Senior Engineering Associate, Civil and Structural Projects on which I worked during my tenure at Technip USA were -

VALERO PORT ARTHUR EXPANSION PROJECT – SATURATED GAS RECOVERY UNIT

Responsible for the design of equipment foundations and process structures and pipe- racks, pipe bridges for the FEED package and Detailed Design Engineering. Designed the foundations for tall columns, Pipe rack modules in the Process areas, Pipe racks in the OSBL area.

Carried out the Study of the support of the Acid Gas Line.

Salina Cruz Refinery Proposal for PEMEX

Worked on the proposal for the Salina Cruz Refinery for PEMEX. 05/2004 – 01/2007 Technip KT India Ltd., Noida, India Principal Engineer, Civil and Structural

Projects on which I worked during my tenure at Technip KTI were -

Oxychem PVC Project, Pasadena, Houston, TX

On deputation to Technip USA, Inc., Houston, TX for six months (from 05/06 to 11/06) for above project.

RN–DHC Project for Total Fina Elf, France

Detailed Design Engineering for SMR unit for Technip Benelux.

BAPCO LSDP Project

Designed convection structure.

Lead Engineer – Worked as a Lead Engineer for the following projects-

ONGC Onshore Processing Terminal, Odalarevu, Andhra Pradesh Designed compressor house,pipe racks & foundations for horizontal / vertical eqp.

CAIRN ENERGY - Onshore Processing Terminal, Ravva, Andhra Pradesh 03/1995 – 05/2004 Projects & Development India Ltd, Noida, India

(PDIL, A Govt. of India Undertaking)

Asst. Project Engineer, Civil and Structural

Resume

Projects on which I worked during my tenure at PDIL were -

Burrup Fertilizer Project, Burrup Peninsula, Western Australia Design of Foundations & Steel Structures; Analysis and design of Technological structures, Platforms, Pipe Racks, etc.

Expansion of Ammonia and Urea Plants at Phulpur, IFFCO Design of Foundations & Steel Structures, Tech. structures, Platforms, Pipe Racks

Gathering Station at Tel Addas

Revamp of Ammonia and Urea Plant at Namrup, for M/s HFCL Design of Foundations & Design of Technological structures, Platforms, Pipe Racks, etc.

Coastal Oil Installation at Paradeep, for M/s BPCL Design of buildings; Analysis and Design of various Plant and Non-Plant buildings e.g. Administrative Buildings, Canteen Building, Sub-Station building, Pump Houses etc.

Parallel Tap-Off Point at Vijayawada, for M/s BPCL

Various LPG Bottling Plants for M/s IOCL

EDUCATION & LICENSES

B.Tech, Civil Engineering, Acharya Nagarjuna University, India, 1993 Passed “Fundamentals of Engineering Exam” – October 2010 Texas Professional Engineering License No. 111611

Louisiana Professional Engineering License No. 41178 Wyoming Professional Engineering License No. 19090 Member AISC

LEGAL STATUS

US Citizen.

Contact this candidate