Michael Keliiaukai Gregory ***** Garretts Lake Rd, Shawnee OK 74804 US Mobile: 405-***-**** - Ext:
Evening Phone: 405-***-**** - Ext: Email: aduy09@r.postjobfree.com
Availability:
Job Type: Permanent, Temporary, Term, Internships Work Schedule: Full-Time, Part-Time, Shift Work
Desired locations:
United States - OK - Midwest City
Work Experience:
Tinker AFB
Midwest City Oklahoma
WG-10
November 30, 2009 January 20, 2020
Aviation Sheet Metal Mechanic
Worked with pneumatic tools, rivet gun, drill motors, rivet shavers, Cherrymax guns, I worked on the KC 135. I've removed and installed the PDI lights, landing gear lights, changed equipment bay doors hinges, did patch repairs, fabricated skins for wing to body, fabricated ribs for wing to body, fabricated backing boards for fuel tanks, flipper valve repairs, skin damage repairs, belly skin removal and reinstall, P1 and P2 skin removal, picked up rivet holes flat peen edges and reinstalled P1 and P2 skin, all aspects of sheet metal work on the weapon system. I've worked on and repaired pneumatic tools, drill motors, rivet guns, cherrymax guns, rivet shavers, air hoses, and grinders.
Crest Foods
Midwest City, OK United States
07/2009 - Present
Salary: 9.25 USD Per Hour Hours per week: 36
Maintenance Man
Duties, Accomplishments and Related Skills:
Maintenance Man Elec., Mechanical, Pluming, carpentry, repair and welding. Supervisor: Jeff Foliy (4088142)
Okay to contact this Supervisor: Yes
Flintco Construction Solutions Oklahoma City OK, OK United States
02/2007 - 01/2009
Salary: 16.00 USD Per Hour Hours per week: 40
Welder
Duties, Accomplishments and Related Skills: Ironworker
Erecting and welding of heavy steel (red iron) for multiple story commercial buildings, laying down decking, install stairs (metal), hanging bar joist, arc, mig, and some tig welding. oxyacetylene, electrode arc, submerged arc, shielded metal arc welding, gas metal arc welding, gas tungsten arc welding, metal spray arc, and spot and stud welding to join all types of common metals and alloys. Plans and lays out work from blueprints, sketches, drawings, specifications, and work orders. Works independently on the basis of oral and written instruction from supervisors or engineers. Works with light, heavy gauge and hardened metals, i.e., mild steel, carbon alloy steel, stainless steel, copper on brass, brass on stainless steel, cast iron, nickel and bronze. Uses electric, oxyacetylene, oxyhydrogen gas metal arc, gas tungsten arc, and gas carbon arc welding processes to weld metal parts and structures ranging from
.025 inches to very thick metal which requires multiple welding passes. Devises special jigs and fixtures to hold parts to be welded. Positions and clamps work, (Contact Supervisor: Yes, Supervisor's Name: Gary, Supervisor's Phone:
Supervisor: Gary 405-***-****) Okay to contact this Supervisor: Yes
ISEC
Colorado, CO United States
02/2005 - 12/2006
Hours per week: 40
Carpenter Leadman
Duties, Accomplishments and Related Skills:
Working from blue prints and drawing, to layout, install counter tops, bathroom partitions and hardware, wood paneling, (using Cady clips, wood screws), far-out for walls, pony walls, drop ceilings. Wood and metal stud framing. Working from blue prints and drawing, to layout, assemble disassemble, repair and or replace sheet metal components. Inspect components for damage deformity and any irregularity, repair and or replace as needed.
Working with stainless steel, sheet metal, and aircraft grade aluminum. Cutting and welding light and heavy gauge metal, joining, and attaching said metals, operating sky trek lifts, bobcat, and forklift. I worked at the Will Roger World Air Port (wood panels, stainless panels) and River Wind Casino. I ran 3 to 7 man crews I worked as a heavy structures sheet metal mechanic. I inspected ctk’s (crew tool kit’s) for inventory and broken tools; I input the time and attendance information on the computer on the company's website. I made sure all parts and supplies were readily available for the men. I ran the crew in the supervisor’s absence. I made sure all sheet metal work were done according to blue prints. Using hand tools such as drill motors, rivet guns, 45 and 90 degree drill motors, etc. I removed and replaced crown skins both left and right hand sides. I removed and replaced main frames. I worked structural repair and modifications (“mods”) on all major and minor repairs and on the skins, frames, stringers, etc. I ordered parts and kept a ledger and a spreadsheet of all parts ordered and what was in inventory (Contact Supervisor: Yes, Supervisor's Name: Jerry Ashord, Supervisor's Phone: 720-***-****
Supervisor: Jerry Ashord 720-***-****) Okay to contact this Supervisor: Yes
Anderson and House United States
07/2004 - 11/2004
Salary: 16.00 USD Per Year Hours per week: 40
Carpenter/Welder
Duties, Accomplishments and Related Skills:
Concrete form carpenter, setting forms for sidewalks, stem walls, pilasters, tilt ups, using box forms, siemon forms, gang forms, using snap ties, keepers, grass hoppers, walers. And when called upon to do so Welding, Hand rails (Star Spencer High School) Pipe for the Rails at the skateboard park Down Town. Equipment operator (bobcat, back hoe) Ran 2 to 10 man crews
Supervisor: Kyle (405-***-****) Okay to contact this Supervisor: Yes
Carpenter Union United States
06/2003 - 07/2004
Hours per week: 40
Carpenter/Welder/Millwright
Duties, Accomplishments and Related Skills:
All aspects of carpentry from framing walls to installing cabinets, Concrete form work, drywall, cutting in stairs, hanging doors, installing hardware, and when called upon to do so wilding and millwright work. Working off of blue prints and shop drawings. Sheet metal work.
Supervisor: Bill Stacy
Okay to contact this Supervisor: Yes
Van Hoose Construction United States
09/2001 - 06/2003
Salary: 15.00 USD Per Year Hours per week: 40
Carpenter
Duties, Accomplishments and Related Skills:
Aid the sub-Contractors in their needs and insure that the job was going according to guidelines. Document daily reports vie computer.
Supervisor: Jim Van Hoose
Okay to contact this Supervisor: Yes
Concrete Enterprise
United States
06/2000 - 09/2001
Salary: 15.00 USD Per Year Hours per week: 40
Carpenter
Duties, Accomplishments and Related Skills:
Build Concrete forms for tilt up walls, Stem walls pile aster, sidewalks, driveways, building slabs, run jack hammers, core drill, Concrete saw (gas and elec.) chipping gun, bush hammer, wherever a job was falling behind I was sent to get it up to speed or to do the punch list. Ran 2 to 5 man crews
Supervisor: Woody
Okay to contact this Supervisor: Yes
Carpenter Union
United States
02/1988 - 06/2000
Hours per week: 40
Carpenter
Duties, Accomplishments and Related Skills:
Framing Home (track and custom) Commercial Framing, wood and metal stud framing, finch carpenter, demo, remodel. Single wall, open beam and double wall
US Navy
San Diego,
United States
04/1980 - 02/1988
Hours per week: 40
E-5
Duties, Accomplishments and Related Skills:
Graduated from NWTGP (Nuclear Weapons Training Group Pacific) in 1980, training in all phases of Nuclear Weapons maintenance Conventional Weapons, a large percentage of NUWPNTRAGRUPAC's effort is devoted to inspections. Spec. Weapons Tech. maintain, repair Assemble, disassemble, repair and or replace sheet metal components as needed (bulkheads, tail section, fins etc.) using power and pneumatic tools, keeping detailed reports on all maintenance procedures. Also trained on the Tomahawk System, and DST mines. Navy Seabee’s (Builder) held a top secret, secret and confidential clearance and was in the PRP program.
Higa Plumbing NA,
06/1977 - 04/1980
Salary: 8.00 USD Per Hour Hours per week: 0
Plumber Helper
Duties, Accomplishments and Related Skills: Help the plumber with the rough in plumbing
USAF Tinker AFB
Midwest City, OK United States
07/1973 - 06/1977
Hours per week: 40
E-4
Duties, Accomplishments and Related Skills:
Reciprocating engine air craft maintenance, interior, exterior maintenance (bulkheads, structural components, ribs, etc.) Inspect and maintain aircraft skins and components. Repair and or replace sheet metal components as needed. Work with hazardous chemicals/materials, dispose of toxic/hazardous waste, and properly clean up spills in accordance with established procedures. Prepare surface for painting, following military tech orders and guidelines. Construction Equipment Operator, Cranes, back hoes, front end loaders, dozer, runway sweepers, street sweepers, snow plows. Clean, maintain said equipment. Operate crane with clam shell, wrecking ball, concert bucket, to pour concert in close quarters with personal in area. Operated cable as well as hydraulic cranes. Position 25,000 lbs. pumps in tight areas, worked with a spotter. Ran back hoes to dig for water, gas, sewer, and JP-5 lines.
Education:
WAIANAE HIGH Waianae, HI United States High School or equivalent 06/1973
Leadership Management Training San Diego, CA United States Professional
Nuclear Training Group Pacific, San Diego, CA United States Professional
Supervisor & Leadership Training San Diego, CA United States Professional
Heavy Timber Construction Port Hueneme, CA United States
Professional
Navy Seabee’s Builder School Port Hueneme, CA United States Professional
Job Related Training: Microsoft word 7.0 12-11-1997
Introduction to Windows 95 01-06-1998
References:
Name Employer Title Phone Email
Lori Swanson Oklahoma Department of Public Safety 405-***-**** Lisa Whiteman Oklahoma Department of Public Safety 405-***-**** Robert Evans Aperia Medical Supply Driver 405-***-****