Mohammed Tauseef Raza,UPDA Certified Mechanical Engineer [HVAC]

Profile

I am pragmatic, self-motivated, and enthusiastic Mechanical Engineer excelled from NBA accredited Engineering College, UPDA/MMUP (Qatar) approved Engineer with 7+ years of experience in HVAC Project Execution, TAB/T&C & Operation and Management of HVAC System in Facility Management, Sports Facility Management, Lusail Iconic Stadium, Oil & Gas and Cement Industry. Well versed with Design standards of ASHRAE, ISHARAE, SMACNA and Commissioning standards of AABC & NEBB. Having basic understanding of BMS. NSDC Certified in MEP Design and Draughting. I can comfortably operate AutoCAD, Revit. Skilled in scheduling, updating and managing projects with Primavera P6.

Educational Profile

Bachelor of Engineering (2012-2016) in Mechanical Engineering from REVA Institute of Technology

& Management, Bengaluru (NBA Accredited WEF:2012-2015) affiliated to Visveswaraya Technological University.

Professional Experience

Mosanada FMS Qatar (September 2021-Till Now) Worked in Lusail Iconic Stadium for FIFA World Cup Qatar 2022TM under Supreme Committee Project:

Operation and Management of HVAC Air Side and Water side systems like AHU, Heat Ex-changer, FCU, VRF, Ecology Unit, SPF, LPF, KEF etc.

T&C of HVAC systems like AHU, Heat Ex-changer, FCU, VRF, Ecology Unit, SPF, LPF, KEF etc.

Hand over and Take Over of AHU, Heat Ex-changer, FCU, VRF, Ecology Unit, SPF, LPF, KEF etc.

Snagging and De-Snagging of Facility Services and Venue.

Accredited member of FIFA Arab Cup 2021TM as MEP crew.

Working on FIFA World Cup 2022TM Stadium as HVAC Engineer. Molden Technical and Consulting Projects Co. W.L.L. Kuwait (December2019- August 2021 Worked on Projects of Al-Jahra Hospital, Hawally Court, KNPC:

Reviewing of Shop Drawing for Pre-measurement & Balancing.

Preparing Tab Progress report &Tab final report.

: aduuki@r.postjobfree.com

` :+974-********, +91-797*******

: https://www.linkedin.com/in/mohammed-tauseef-raza-9624656b

: P3540885(valid up to 14-07-2026)

DOB: 21-08-1993

Address: 32K, Jalchakki Road, Kankroli, Rajsamand, Rajsthan-313324 Nationality: Indian

Measuring of Air pressure of HVAC System, Rotational speed measurement, Electrical components measurement.

Duct Traverse by Log-Tchebycheff Method.

Anemometer Coil Traverse. Performance test of HVAC System.

Testing of Duct Systems with several methods using Vaneometer, Micromanometer, Pitot tube, Tachometer, Capture Hood etc.

Air Balance Preparation and Air balancing.

Water Balancing of Hot water system & Chilled -water system. Fluid line Group (November 2018-October 2019):

Handled Ram Bagh Chiller Plant Project of 175 Tr X 3, Cooling Tower 200 Tr X 3, Its piping fittings with Ductable Indoor units, Erection of AHU of various CFM and TFA.

Handling of Piping structure work, Isometric P&ID Drafting for CHWS and CHWR.

Handled WELLS FARGO IT Project of 6TR Outdoor and Indoor unit (Cassette) and it’s piping.

Handled Vamshiram Builders VRV projects of 36 HP Outdoor units it’s piping, fittings like refnets and various Indoor units like FCU it’s ducting and Cassette unit.

Handled Erection of AHU of 20 TR,5000 CFM for Century Hospital. Wonder Cement Limited. (WCL), Rajasthan from (December 2016 - Oct 2018):

Worked with WCL Rajasthan, as a HVAC Mechanical Engineer in Projects, Job involved Estimation, Design, Ducting, Piping, Erection and Installation of Equipment. Monitoring of Projects Stages.

Heat Load Calculation of CCR, installation of its Outdoor and Indoor unit.

Design and Drafted chillers capacity of 57 TR it’s piping and installation of various Indoor units like FCU, AHU of Capacity of 44 TR CFM of 15000.

Handled Chiller Plant Project of 200 Tr X 3, Cooling Tower 300 Tr X 3, Its piping fittings with Duct able indoor units, Erection of AHU of distinguished CFM.

Design, Erection and Project Handling of 24 HP VRF Out door unit, its copper Piping and Fittings.

WHRS waste heat Utilization for Refrigerant Absorption Chillers.

Piping works of Cooling tower of 150 TR Raw Mill.

Piping of Cooling Tower of 150 TR Coal Mill.

Piping works of Selective Non-Catalytic Reaction system for liquified ammonia to reduce NOx reaction.

Erection and commissioning of Rack and pinion Ali kraft lift of 20-ton Weight bearing capacity for 30 mtr. height.

Welding Inspection and quality check of various sections of Primary and Secondary Pump Piping, Flanges, Valves, Nipples etc.

Worked with Wonder Cement Grinding unit at Nardana, Dhule, Maharashtra

Worked as Project Engineer. Worked involved erection of Cooling Tower of Cement Mill of 150TR and its Piping. Handled Piping of HAG (Hot Air Generation) System for Cement mill MS oval Duct of 800 mm dia.

Software Skills

PMIS: Primavera P6, Word, Excel, Power Point etc.

Design Tools: AutoCAD, Autodesk Design Review, Revit HVAC, Navisworks Professional Skills

HVAC Design and Drafting

Plumbing Design and Fire Fighting

Electrical Design and Drafting

Project Management with Primavera P6

Revit-HVAC

Experience Summary

Certified in MEP Design and Drafting of Residential and Commercial Building from NSDC with 6+ years of experience in MEP Projects of Cement Industry, Oil &Gas, Sport Facility Management and Building Services. More than 5 Vocational Internship in various Mechanical Industries.

Undertaken HVAC Project of G+5 Commercial and Residential building.

Testing Adjusting and Balancing of Air and Water System of Al-Jahra Hospital Kuwait.

Testing Adjusting and Balancing of Air and Water System of Hawally Court Kuwait.

Testing Adjusting and Balancing of Air and Water System and Performance Test of Warehouse and Admin Building of KNPC Kuwait.

Design and Drafted chillers capacity of 57 TR it’s piping and installation of various Indoor units like FCU, AHU of Capacity of 44 TR CFM of 15000.

Handled Ram Bagh Chiller Plant Project of 175 Tr X 3, Cooling Tower 200 Tr X 3, Its piping fittings with Duct able indoor units, Erection of AHU of various CFM and ERU/HRU.

Handled Vamshiram Builders VRV projects of 36 HP Outdoor units it’s piping, fittings like refnets and various Indoor units like FCU it’s ducting and Cassette unit.

Handled WELLS FARGO IT Project of 6TR Outdoor and Indoor unit (Cassette) and it’s piping.

Handled Erection of AHU of 20 TR for Century Hospital.

Handled P&ID Isometric Drafting of CHWS and CHWR.

Reviewing of Shop Drawing for Pre-measurement & Balancing.

Preparing Tab Progress report &Tab final report.

Measuring of Air pressure of HVAC System, Rotational speed measurement, Electrical components measurement.

Testing of Duct Systems with several methods using Vaneometer, Micromanometer etc.

Air Balance Preparation.

Performance test of HVAC System.

Possess the knowledge of REVIT MEP software for HVAC ducting and Piping work.

Managed team for Height work at 120 m in structural welding of various section like beam, channels, angles etc.

Experienced in taking Daily Tool talks for Project team.

Participated in “Safety in Material Handling “, nominated by Wonder Cement Ltd.

Experienced in Handling Rigging work of Equipment and MS Duct.

Involved in various project stages of Alikraft Rack and Pinion Elevator.

Proficient in various Calculation of Piping structural members like Beams, Channels, Angle and different Structural members etc.

Hands on experience in pipe line works of HAG.

Involved in welding works quality check of structural members of various section of Chiller plant.

Experience in rigging monitoring of equipment and materials from 80ton TIL Crane.

20 days Industrial training in L&T Construction Equipment at field on different model of L&T excavator and its trouble shooting from 05-07-2015 to 25-07-2015 as a vocational trainee.

27 days Industrial training in Lee Boy in Study of Assembly Process from 01-01-2015 to 27- 01-2015 as a vocational trainee.

21 days Summer Training in WONDER CEMENT from 07-07-2014 to 28-07-2014 as a vocational trainee.

20 days Industrial Training in Cummins for Practical training on different model of Cummins engine from 07-01-2014 to 27-01-2014 as a vocational trainee.

13 days Industrial Training in R.K. MARBLE PVT. LTD. for Trouble Shooting of Heavy Earth Moving Machinery & Tyre Mounted Machinery from 15-07-2013 to 28-07-2013 as a vocational trainee.

Worked on software like AutoCAD, Autodesk Design Review, Revit-HVAC, Primavera P6.

Experience in Man-hour estimation for various sizes of projects.

Good communication, organizational skills and leadership quality with the will and determination. Hobbies

Singing

Social Work

Extra-Curricular Activities

Worked with Rotary club as a Student President at Rajsamand

Organizing member of World Bio-Fuel Day 2015

Worked as Captain, Vice-president and President during Schooling. Achievements

Secured 1st place in Indian National Congress science 2010 Rajsamand region.

Secured 1st place in Group discussion at intra- school competition 2010.

Secured 2nd place in Debate at intra- school competition 2010. Declaration

I hereby declare that the information furnished above is true to the best of my knowledge and subject to verification.

Place: Doha,Qatar Mohammed Tauseef Raza

Date: 02nd Jan 2022 Mechanical Engineer

Contact this candidate