Onofrio R. Nizza N.J. P.E.

*** **** **

Newfoundland, PA 18445

1-570-***-**** (cell)

E-mail adut2k@r.postjobfree.com

PROFESSIONAL OBJECTIVE: Structural Engineering

Analysis, design, construction drawings and shop drawings for new/renovation of high-end residential/townhouses, commercial, retail and industrial buildings. Which are constructed of concrete, steel, timber and masonry.

Structural software-mult=frame and enercalc.

Civil works involving site planning, permits, topographic surveys, field inspections and sanitary/storm/water systems.

Environmental compliance of various EPA (ust, edda, eis) and NJDEPE (dpcc/dcr) laws.

PROFESSIONAL ENGINEER. NJ (24GE02955100)

EDUCATION:

NJ Institute of Technology 27crs. of 30crs. in MSCE

Manhattan College BCE

Queensboro Community College AS

MILITARY SERVICE: US Army- Honorable Discharge

EMPLOYMENT HISTORY:

Structural Solutions (Toms River N.J.)

Engineer (1-17/8-19)

Review design drawings for house lifting building on jersey shore.

Donly Engineering (Bergen Co. N.J.)

Project Engineer (3-15/8-16)

Review design drawings for building concrete foundations and steel frame drawings.

Triple B Fabricating (61 Willett St. Paterson NJ)

Project Engineer (9-13/12-13)

Review design drawings for material take-off for biding.

Design of connections and sign/seal erection/fabrication drawings.

Mgr. Danica Ivanoski 973-***-**** ex(302)

e-mail:adut2k@r.postjobfree.com

McGimpsey & Associates

Project Engineer (1-2013/12-2015)

Part time design on waste water projects.

Savin Engineers (3 campus dr Pleasantville NY )

Temporary Structural Engineer (04-12-10/01-15-11)

Duties involved were analysis, design, and drawings ( Process Control Building, Pump Station and UV Building at Westchester waste water project) including slabs on grade, columns, composite steel beams, roof deck and a multi-story steel/concrete frame.HR:Karen Ricci, Mgr Str: Hussein Elzoghby 914-***-**** e-mail: adut2k@r.postjobfree.com

Maitra Associates PC (27 worlds fair dr. Somerset, NJ)

Sr. Structural Engineer (04-21-07/08-24-09)

Duties involving analysis, design, drawings and construction phase duties for commercial, industrial buildings, schools and hospitals (checking live load on varies floors and garage roof.)HS pool building, LIRR Islip police station and USAR maintance bldg.

( i.e.).Bearing/non bearing light gage metal studs, open web joists, retaining walls and helical piles.

Supervisor: HR Theo Emenuga, Str Mgr Andy Revera 732-***-****

e-mail: adut2k@r.postjobfree.com

Dominick R. Pilla Associates PC (Nyack,NY)

Structural Engineer (12-11-06/03-09-07)

Duties involved were analysis, design, and drawings for rehab/retrofit of residential buildings. Also property assessment condition reports for residential buildings.

Supervisor: Dominick Pilla 845-***-****

TAI (Tourgee Associate Inc (Owings Mills,MD) (contract-ATSI)

Structural Engineer (09-05-06/11-17-06)

Duties involved were analysis, design, and drawings for 7 crowns $50 million expansion. (ie Carbis (fall prevention equipment)for trucks and rail road cars, also spill containment system, pipe supports and tank foundations)

Supervisor:Gleen Reeder (410)356-3108x214

Bay State Design, Inc (Self-contract)(Mahwah,NJ)

Project Engineer(05/01/06-06/30/06)

Duties involved were analysis, design, and drawings for Cell phone Plant Works. (ie field visits, developed sites and interact with clients)

Hanington Engineering Consultants- (Flanders, NJ)

Structural Project Engineer 08/00-02/06

Duties involved were analysis, design, and drawings for new/renovation of high-end residential/townhouses, rehab/restoration, commercial, retail and industrial buildings constructed of concrete, steel, timber and masonry. Also aluminum and plastic materials. Designed bearing/non bearing light gage metal studs, open web joists. Retaining walls,helical piles, damage appraisals, S&V Parking garage, Machine shop building and auto shop building.

Various projects.-solar panels structural system with assistance of Architect for schools/churches/commercial/residential buildings. At JFK,Airline maintenance building/garage and Phila. schools maintenance projects.REF. 973-***-**** ext.Ed Hanington 12 owner

Paphian Enterprises, Inc.(Ocean City, NJ)

Project Manager-04/00-08/00

Duties involved were as a project manager for the construction of four ongoing projects. This included the Newark fire house with a communications center, the Princeton Township Center, the science building for the College of New Jersey and the addition for the South Brunswick Middle School.

Port Authority of NY&NJ-(WTC)(contract-CDI)

Project Engineer -02/97-01/00

Duties involved were as a project engineer for the Port Authority's School soundproofing program. This included over 30 active schools at a cost of over $80 million on an on-going program. Responsibilities included: selection of schools, preparing budget authorizations, identifying priorities with school officials and selected design firms, review process of schools, track construction phase, and interact

with FAA on eligible funded work.

Atometrics -Principal Engineer-(West Nyack, NY) 04/96-02/97

Duties involved were the review and preparation of plans, specifications and cost estimates in civil, architectural and structural of various projects. This included the rehabilitation design of NYC; Dept. of Sanitation, solid waste marine transfer

stations including HVAC structural supports, tipping floor, foundation failures, access road and rolling barge doors. Also structural inspector on TBTA HVAC projects at nine bridges/tunnels including HVAC structural supports, welding inspection and vent shaft relining. Working with SEPTA for preparation of the Annual Construction Plan document.

Raytheon/Holmes & Narver- Sr. Civil Engineer

09/93-04/96 Federal Building JFK Airport (contract-CGS)

Duties involved were the review and preparation of plans, specifications and cost estimates in civil, architectural, structural, mechanical and electrical for the expansion of the Leesburg Va. Flight Service Station. Survey site locations for Direction Finder (DF-type of Rx antenna) and preparation of construction plans. Radar Radome Replacement-environmental compliance through various state and local planning boards. Federal environmental law pertaining to new, existing and closings of FAA Sites.

Port Authority of NY&NJ (Port Newark, NJ)

Construction Inspector-06/93-09/93 (contract-Volt)

Duties involved were as a construction inspector to administer plans, specifications, schedule and permit compliance for removal of underground fuel storage tanks per NJDEPE Regulations at Port Newark.

Benjamin Moore & Co. - Project Engineer -05/92-01/93

Duties involved were design, specifications, shop drawings and field construction management of foundations, structural steel, exterior paneling and plumbing for administration building in Flanders, N.J. Plus design, cost estimate and construction

management for compliance of hazardous material containment(dpcc/dcr-spill control) for two N.J. plants. In addition to various projects in paint plant.

New York Power Authority -Civil Engineer

(05/91-12/91)(contract-HEPCO)

Duties involved were design, specifications and drawings of a comfort station (first aid, rest room, info center-which involved foundations, masonry walls and wood roof framing), hiking trail, trail bridge, bridge abutments, road paving, sanitary system and a steel pier. Computer program: AutoCAD.

Morrison Knudson Corp. -Design Engineer -06/90-03/91

(NYC,NYS)

Duties involved were design/analysis, specification, budgeting and construction drawings for the Advanced Automation System Lab (AASL) and Aviation security lab(including slabs on grade, columns, composite steel beams, roof deck and a multi-story steel frame building w/progressive collapse and blast resistance analysis.) for the FAA Technical Center at Atlantic City. Advanced Automation System Lab (AASL)was three buildings-a core building of eight stories with two elevators-a two story building for computers ( 100 ft. x 150 ft.) The third building, triangle shape, used as an entrance, lunch room and conf. rooms. This had a foot print of 125 ft x 125 ft and got smaller once it got to the top. Computer program: Staad3: Frame analysis. AutoCAD-2D.

Federal Electric Corp. - Civil Engineer -08/81-12/89

Duties involved were design, specifications and construction drawings for new/rehab residential, industrial and commercial buildings made of concrete, steel, timber and masonry. Civil works involving site inspections, topographic surveys, site plans, road paving and sanitary sewer/storm systems. Project management including scheduling, budgeting and estimating for various projects. Projects: NSF-Antarctic bases (Building design-pre cast foundations and pre engineered buildings)Saudi Arabia-Loran C-Locate Tx towers. Site design-Tower grounding system. Halon fire suppression system and mirco-wave towers. Saudi Arabia-Peace Shield Communication System-Locate mult. Tx/Rx towers and cell phone towers at RSAF Bases. Peremier secuity system comprised of sensors, fence, rader plus entrance guard at varous Army chemical sites. Computer program: Lotus 123, Dbase IV, Primavera and MC-2. Codes used ACI 301,350. AISC, BOCA, UCC.

Federal Aviation Administration -Civil Engineer

07/75-08/81

J.F.K. International Airport (Civil Engineer

02/80-08/81) (GS-0801-12)

Newark International Airport (General Engineer

07/75-02/80) (GS-0801-7, 9, 11)

Duties involved were survey of equipment locations, developing Civil/structural/ electrical/mechanical design, construction drawings and specifications fornew and relocated airport navigational aids (ils, als, vasi, dme, vortac, asr, asde).

Worked on taxiway/ runway/apron under radio control from control tower.

Contact this candidate