Michael Schultz

** ****** ****, ***********, ** *7307 609-***-**** adtdoy@r.postjobfree.com

Objective

I would prefer a job with opportunities for advancement, but the immediate need is good, reliable employment.

Over-time is not a problem.

I prefer day shift.

Education

High School 1987 Millville Sr. High, Millville, NJ

Certified by South Jersey Gas Company – Thermal Saddle & Butt type Fusion

Certified and Licensed as a Power Lift Truck operator – Office Depot

Skills & Abilities

Mechanical Maintenance Technician

Preventative maintenance of food processing equipment.

Troubleshooting and repairing food processing machinery.

Mechanical Assembly

As an assembler, I worked directly with engineers.

Help trouble-shoot problems in the assembly of complex machine sub-assemblies.

In my last assembly-related job, I was working on farm-related equipment.

Construction

Experience with various construction disciplines - masonry, carpentry and electrical installation.

A large piece of my experience was related to electrical wiring.

Electrical installation and maintenance experience in industrial, commercial and residential areas.

Small Engine mechanic

Experience with disassembly, reassembly, maintenance and servicing of many types of small gas engines.

I have a focus on motorcycles.

I’m very mechanically inclined.

Self-employment

Worked on my own as a general contractor.

Started a new business related to harvesting of live bait fish for sport fishermen.

Experience

Office Depot Distribution Center, PA – October, 2020 – May, 2021

As an equipment operator/order picker, I operated the order picker to transfer products to the pick module center and to the full-case shipping conveyor center. I become qualified and licensed as a order picker operator while working here.

Columbia Ancillary Services, PA – July, 2020 – September 2020

As a service technician, I delivered, installed, serviced and repaired power wheelchairs, stair lifts and vehicle lifts for disabled veterans.

Schneider Electric/Square D Warehouse, PA – April, 2020 – June 2020

As a Utility Worker, I signed out a Low Level Order Picker Lift Truck for moving bins of cardboard to the baler. Operated baler.

As a Picker/Packer, I signed out a Low Level Order Picker Lift Truck to complete and fill job orders. Operated RF Scanner. Prepared orders for shipping.

Schreiber Foods Inc., PA – July, 2019 to Dec, 2019

As a Maintenance Technician, I was responsible for preventative maintenance, troubleshooting and repairing of machinery used in the food plant.

Specifically, the machines I worked on the most were the cream cheese fillers, case packers and conveyor systems.

Because of the large amount of equipment, we often used books and other documentation to help research problems.

Because this company was in the food processing industry, all work, including preventative maintenance completed on the machines, was documented in the computer system.

Schindler Elevator, Hanover, PA – Feb, 2019 to June, 2019

I was responsible for assembly of the elevator components which are visible to customers, such as doors, entrances, jambs and headers.

Built custom packaging for shipping of completed entrance assemblies.

Used various pneumatic tools such as rivet guns, “riv-nut” thread-insert guns, staplers and nail guns.

Accessed bar-codes from databases so they could be added to the assembled components.

Worked on multiple shifts and optional over-time.

Manitowoc Crane Group, Green Castle, PA – Sept, 2017 to May, 2018

I was responsible for helping to test and calibrate cranes before they were sent to the customer.

The main job duties included: cabling and un-cabling hoists, setting and securing cranes to their test pads, and crane rigging, including multi-load-block pulley systems.

Installed inserts, jibs and stingers using a fork-lift, built large weights, and measured distances to determine the lengths for calibration purposes.

Rotated through other departments to learn other dimensions of the job – such as crane boom assembly, main crane assembly.

Moved large assemblies with the fork lift to support production. - some of these were 32 feet long, not very balanced, and the terrain was rough and icy.

I was also flexible in working on the day and night shifts and some 56-hour work weeks.

GVM Inc., East Berlin, PA – March, 2016 to March, 2017

As a mechanical assembler, I was responsible for major sub-assemblies on large spray coupes.

In this position, I built many large sub-assemblies, primarily chain-cases, front axles, and suspension components.

Prepared many pieces like radiators, front hood supports, hydraulic manifold assemblies, flow meter assemblies, etc.

The smaller assemblies normally fit together according to design parameters, but the large assemblies required custom fitting of many components.

I have a fair amount of experience with measurement tools to achieve accurate tolerances, grinding and polishing.

In many cases, it was necessary to fabricate tools to facilitate assembly and disassembly.

I worked on new production machines as well as prepared parts for warranty work on older machines.

Jobs in New Jersey

Live Bait Fisherman – 2005 to 2015 - Caught live bait-fish and delivered healthy bait fish to marinas, bait-shops and customers for use by off-shore tuna/sport fishermen.

Mechanic – 2005 to 2015 - Race Central Motorcycle Shop. Worked on various small engines for bikes, recreational water craft, outboard and in-board motors and some cars. I possess a deep knowledge of service and tuning of dirt-bikes.

Self Employed General Contractor – 1999 to 2005 - General small projects included electrical work, roof cleaning and sealing, drywall repair and installation, power washing and resealing of exterior siding and decks. Installation of fences, out-buildings and exterior lights and sprinkler systems.

Electrical Assistant – 1999 - Benny Electric. As an electrical assistant, worked primarily on residential wiring.

Laborer – 1997 to 1998 - Frank Masonry LLC. As a general laborer built scaffolding and prepared the jobsite, setup and operated laser transits, mixed mortar, stacked block and helped the masons build structures. Operated various hand tools, mixers, power saws and industrial lifts.

Tile Installer – 1996 – 1997 - Jeff Marcacci Tile Co. As a general laborer prepared surfaces and installed tile flooring and bathroom/kitchen wall treatments.

Painter – 1995 - Hines Painting Co. Scraped, sanded, primed and repainted residential exteriors located in a salt-water environment.

Laborer – 1994 to 1995 - S.W. Downer Construction. Worked in the area of natural gas distribution. Assisted equipment operators in safely digging near underground utilities systems. Also ran jack hammers, prepared trenches and assisted welders. Operated non-directional pneumatic boring machine. Certified by South Jersey Gas Company for thermal fusion of plastic gas delivery systems.

Carpenter – 1994 - Triple C Construction. As a residential home builder, handled all phases of framing, roofing, siding and window installation.

Laborer – 1992 to 1994 - Bryan Page Masonry. As a general laborer, built scaffolding and prepared the jobsite, mixed mortar, stacked block and helped the masons build structures. Operated various hand tools and large wet saws.

Electrical Assistant – 1990 to 1992 - Allen R Pitman Electric. As an electrical assistant, worked on residential and commercial building wiring. Also, worked on refrigeration systems for Wawa buildings and on the Ireland Coffee facility. Did considerable commercial work in older buildings, factories and facilities installing new equipment and upgrading existing systems and making service changes.

Electrical Mechanic – 1987 to 1990 - John Haydak Electrical Inc. As an electrical mechanic worked on residential building wiring. Completed total wiring of at least 100 homes over a three-year period.

Rental Service Technician – 1986 to 1987 – Teps Equipment Rentals – Logged and tracked service tickets and performed maintenance on Honda rental equipment to keep items in rentable condition.

References

·Matt Shaeffer GVM Plant Supervisor 717-***-****

·Bob Gebhardt GVM Assembly Supervisor 717-***-****

·Bryan Page Masonry Business Owner 856-***-****

·John Haydak Electrical Contractor 856-***-****

Contact this candidate