RESUME: Sher Asif Khan Last Updated: September, **22 1 of 4

OBJECTIVE

I Want to achieve a commendable position in field of QA/QC with gallantry. Professional Education

Master of Science in Mechanical Engineering

University Of Engineering and Technology Taxila

Bachelor Of Science (Mechanical Engineering)

University Of Wah, Wah Cantt, Pakistan

Technical Certification

Welding Inspection

CSWIP 3.1 WELDING INSPECTOR

Customer ID: 771354

Result: Pass

Nondestructive Testing

(NDT)

ASNT NDT Level II Liquid Penetrant Testing

As per Requirement of Recommended Practice No. SNT-TC-1A Personnel Qualification and Certification in Non Destructive Testing ASNT NDT Level II Magnetic Particle Testing

As per Requirement of Recommended Practice No. SNT-TC-1A Personnel Qualification and Certification in Non Destructive Testing ASNT NDT Level II Radiographic Testing

As per Requirement of Recommended Practice No. SNT-TC-1A Personnel Qualification and Certification in Non Destructive Testing ASNT NDT Level II Ultrasonic Testing

As per Requirement of Recommended Practice No. SNT-TC-1A Personnel Qualification and Certification in Non Destructive Testing Codes & Standards Knowledge

American Society of

Mechanical Engineers

(ASME)

ASME B & PVC Section IX Welding and Brazing Qualifications. ASME B 31.3 Process Piping

SHER ASIF KHAN

QC WELDING INSPECTOR/ MECHANICAL ENGINEER

FROM:- Punjab, Pakistan

CELL:- +974********

E-MAIL:- adtaxa@r.postjobfree.com

RESUME: Sher Asif Khan Last Updated: September, 2022 2 of 4 Certificate Of Completion QCON LMS Online Training QSGTL MTA 3 Certificate of Dropped Objects Prevention on December 29, 2021. Certificate of General Quality_DFL on December 29, 2021. Certificate of General Quality_SSP on December 29, 2021. Certificate of line of Fire Awareness on December 29, 2021. Certificate of TA Expectations on December 29, 2021. Certificate of We Care Coach on December 29, 2021. Certificate of We Care Observation on December 29, 2021. Certificate of QSGTL Asset and Area Induction + LSR on December 31, 2021. Professional Experience

Over all five year of progressive career in Pakistan and Qatar with highly reputed companies like Pakistan Ordnance Factories Rawalpindi, OGDCL Pakistan, Agritech Limited formerly Pak American Fertilizer Pakistan and QATAR SHELL GTL MTA-3 with SGS QATAR.

Experience Details

Company : QATAR SHELL GTL MTA-3 WITH SGS QATAR in Ras Laffan Designation : Welding Inspector

Period : 02nd January 2022 to 31st May 2022

Company : Descon Engineering

Designation : Welding Inspector

Period : 15th August 2019 to 29th July 2021

Company : Agritech Limited formerly Pak American Fertilizer Designation : Welding Inspector

Period : 1st July 2017 to 29th June 2018

Responsibilities and Activities

Inspect material and equipment as applicable to ensure compliance with project requirements and for proper Handling, storage and protection at facilities/construction sites.

Preparation of material traceability reports.

Review of Contractor Welding related documents (WPS, PQR).

Witnessing Welder Qualification test as per ASME IX.

Monitoring of daily welding consumables record.

Quality Control of welding parameters as per Welding Procedures.

Ensure that all operations are carried out in complete compliance with safety legislation.

Visual inspection of welding (before, during & after) as per approved WPSs

Steel structure fabrication inspection and documentation. RESUME: Sher Asif Khan Last Updated: September, 2022 3 of 4 Projects:

• Research Project for Master’s thesis in MSc Mechanical Engineering was related with ‘Energy Consumption, CO2 Emission, Socio Economic analysis and Cost analysis with Different scenarios’ and title of thesis was Pakistan Transport Outlook: Post Analysis of Electric Cars”.

• FYP in BSc Mechanical Engineering was related with “GPS/GSM BASED VEHICLEIGNITION SYSTEM”.

Publications and Achievements as 1st Author/Presenter:

Modeling the penetration of Electric Vehicles as an alternative mode of road transport in Pakistan.

To carryout daily fit-up and weld visual inspection, and dimensional inspection according to the applicable Project specifications, approved drawings and International codes and Standards.

Perform "Hold", "Witness" and "Surveillance", inspections and tests at facilities/construction sites to ensure Compliance with Project Specifications.

Raising CARS against non conformances found at site.

Preparation of all inspection reports.

Coordination with NDE Company to conduct RT, MT and PT.

Arranging NDT (RT, MPI and DPT) as per ASME code section V and witness of MPI and DPT.

Identify and mark repairs as per NDT reports.

Preparation of QA/QC packages as per the project inspection requirement.

Punch list preparation.

Witness of hydro test activities at site.

Witnessing & verifying Post Weld Heat Treatment as per specifications.

Coordinating with respective clients and vendors throughout Inspection process period.

Ensure quality work at site.

Commissioning of MHI multistage Centrifugal compressor and steam Turbines under Supervision of MHIs VSM.

Supervision of staff and maintenance workers under command.

Inspection, maintenance and diagnostic of stationary equipment: Pressure Vessels, Tanks,

Condensers, Valves, heat exchangers.

Rotor Replacement and complete lubrication circuit’s Oil Flushing of 11.5 MW Steam

Turbine at Power Generation Plant of Pak-American Fertilizers Ltd.

Reactive and Preventive Maintenance during plant operation.

Overhauling of Steam Turbines of both Single stage and Multi stage.

Preparation of maintenance and overhauling reports after job conclusion

General maintenance of Centrifugal Pumps and Lube Oil Coolers & Gland Condensers.

Coordinate with mechanical, scaffolding, carnage and insulation supervisors for major

Maintenance shutdowns activities.

Planning, Scheduling and Budgeting for Maintenance and Inspection Sections. RESUME: Sher Asif Khan Last Updated: September, 2022 4 of 4 ICME/Jan 2022.

As co author

Dependence of Bioenergy Production on Chemical Composition and Crop Phonology of Biomass Feedstock.

Energy generation potential through utilization of piezoelectric materials in smart Motorway system (SMS) in Pakistan ICEEST 2019.

Transformation of gasoline two-wheeler to electric two-wheeler; Energy and Environment Perspective. International Conference on Mechanical Engineering. Computer Skills

MS OFFICE (Word, Excel and Power point)

Linguistic Skills

Fluent in English, Urdu, Hindi and Punjabi

Documents

Documents will be provided on request.

Personal Information

Father’s Name:- Sher Khan

Nationality :- Pakistani

Residency Permit:- 295********

Passport:- VA4131672

Date of Issue:- 21 Jun 2021

Date of Expiry:- 20 Jun 2026

Marital Status:- Single

NOTE:

I AM IN QATAR ON WORK VISA HAVING VALID AND Transfer QID, AVAILABLE TO JOIN IMMEDIATELY.

Contact this candidate