Name: ENGR. DOMINGO B. PUNO JR.
Contact No. 094********
Email Address : *********@*****.***
Date of Birth: July 10,1973
Nationality: Filipino
SPECIALIZATION:
DESIGN CONSULTANT,TESTING and COMMISSIONING,
ELECTRICAL CONSTRUCTION MANAGEMENT &
SUPERVISION, ELECTRICAL DESIGN, PROPRIETOR,
TEACHING ENGINEER
Education:
Master of Engineering in Electronics & Communication Engineering De La Salle University, Philippines-1998-2000
Bachelor of Science in Electrical Engineering
Notre Dame University, Philippines-1990-1995
Professional Registration:
PROFESSIONAL ELECTRICAL ENGINEER
Professional Regulation Commission
Manila Philippines
Registration No.3838
ASEAN ENGINEER REGISTERED
Registration No. 7062
Philippines Technological Council
ASEAN CHARTERED PROFESSIONAL ENGINEER
Registration No. FACPE-0144/EE: ACPE-03502/PH
Philippines Technological Council
UPDA GRADE A
URBAN PLANNING & DEVELOPMENT AUTHORITY, Doha, Qatar Registration No. 12755
REGISTERED ELECTRICAL ENGINEER
Professional Regulation Commission
Manila Philippines
Registration No. 0000642
Professional Membership:
o Institute of Integrated Electrical Engineers (IIEE) State of Qatar Chapter
o Rotary Club International
District 3870- Philippines
PERSONAL SUMMARY:
o Over 28 years relevant experience as an Electrical Design Engineer in the field of electrical testing and commissioning, construction management and supervision, design of electrical system, teaching engineer and proprietorship.
o Supervise in the installation of high rise building, commercial / industrial building, power plant and, high voltage transmission lines.
o Has engage much of my time in the academe by way of teaching electrical engineering subjects and mathematics
o Has trained more on the use of several software’s (ETAP, E-DESIGN, ECODIAL, DIALUX, MATLAB) as a tools for engineering calculations and estimates.
o Has trained on the use of computer based interfacing modules for monitoring, control and supervision of electrical system WORK EXPERIENCE:
D. B. PUNO ENGINEERING SERVICES – 02 BORMAHECO DRIVE RH 4, COTABATO CITY PROPRIETOR – 15 MARCH 2020 to PRESENT
Projects COMPLETED:
1. ROOFTECH PREMIUM STEEL – Pigcawayan, North Cotabato 2. BLUE PAHM RESORT – Libungan, North Cotabato
3. LA PANDAY INCORPORATED – Lambayong, Sultan Kudarat 4. SUPREME COCO VENTURES INC – Tupi, South Cotabato 5. Communications Tower Installation for Multiple Site 6. Electrical Design and Implementations of School Buildings for Multiple Sites.
7. CRMC – MALASAKIT CENTER – Sinsuat Avenue, Cotabato City 8. CONSULTANT – Phase 3B Clarendon Project
Scope of Works and RESPONSIBILITIES:
Design & Supervise of Electrical System for various projects
Preparation of BOQ for bidding and project implementation.
Seal of Electrical System and Implementations
Preparation of as built plan and site supervisions for multiple projects
Q-MEP - DOHA QATAR
SENIOR PROJECT ENGINEER – 01 APRIL 2019 to 11 FEBRUARY 2020 Project Handled:
1. QATAR PETROLEUM DISTRICT
DUTIES and RESPONSIBILITIES:
Re-Design for electrical system as per Qatar Construction System.
Tendering works for special projects.
Preparing as built plan and coordinate with consultant for rectification and variations on the electrical installations.
Prepare BOQ for submittals and documents for hand over to client, to consultant, and to the main contractor.
SPECIALIST INDEPENDENT BUILDING SERVICES - DOHA QATAR COMMISSIONING - ELECTRICAL ENGINEER – 18 AUGUST 2016 – 18 MARCH 2019 Project Handled:
1. NEW PORT PROJECT PACKAGE 0067 – DATA CENTER
2. MUSHERIB PROPERTIES – MULTI-USED COMMERCIAL BUILDING 3. MALL OF QATAR
4. SIDRA MEDICAL & RESEARH CENTER
DUTIES and RESPONSIBILITIES:
Design and Review projects documents as per BS 7671 standards.
Conduct testing and commissioning on both LV and ELV networks of the building.
Prepare test reports and supervise site verifications of the electrical drawings.
Review the contractors shop drawings, method statement and inspections test plans.
THE ARABIAN CONTRACTOR COMPANY - DOHA QATAR
PROJECT MANAGER - ELECTRICAL – 21 DECEMBER 2015 to 05 JULY 2016 Project Handled:
1. AL ASMAKH MIXED USE DEVELOPMENT –Industrial Street, Doha, Qatar DUTIES and RESPONSIBILITIES:
Design of electrical system for project proposal.
Undertaking all site supervision and inspections.
Preparing as built plan and coordinate with consultant for rectification and variations on the electrical installations.
Prepare BOQ for submittals, and documents for hand over to client, to consultant, and to the main contractor.
DIWAN AL EMARA - DOHA QATAR
ELECTRICAL ENGINEER – 21 JULY 2015 – 21 SEPTEMBER 2015 Project Handled:
1. Hilton Double Tree Five-Star Hotel – Al Sadd, Doha, Qatar 2. Hermas Development -Five-Star Hotel - Lusail, Qatar DUTIES and RESPONSIBILITIES:
Design for Electrical System for projects approval as per QCS standards.
Undertaking all site supervision and inspections.
Checking as built plan and coordinate with client for rectification and variations on the electrical installations.
Review documents submittals for project specifications.
RAYMOND NAHRA FOR ELECTRICAL AND MECHANICAL WORKS W.L.L.- DOHA QATAR SENIOR ELECTRICAL ENGINEER – 15 MAY 2014 TO 31 MAY 2015 Project Completed:
1.Installation of HVAC-VRV System for VIP GOLF VILLA,15MAY-15 SEP.2015 2.Installation of HVAC-VRV System for Sheik ABDULLAH BIN NASSER BIN KHALIFA AL THANI- NOVEMBER 5- FEBRUARY 15, 2015
3.Installation of FAHU System for SHERATON HOTEL-05 OCTOBER-5 NOV.2015 4.Design, Supervise, Installation of P.I.A.D. factory - JAN 5-FEB 15, 2015 DUTIES and RESPONSIBILITIES:
Design of Electrical System for consultant’s approval
Undertaking all site supervision and inspections
Preparing as built plan and coordinate with consultant for rectification and variations on the electrical installations.
Prepare BOQ for submittals, and documents for hand over to client, to consultant, and to the main contractor.
Philippine Trade Center Incorporated –Cotabato City ELECTRICAL ENGINEER - MAY 2011 to March 2013
DUTIES and RESPONSIBILITIES:
Design of 3-MW Steam Generating Plant auxiliary system as per PEC standard.
Negotiating with different electrical contractors in testing and commissioning of all electrical equipment’s.
Ensuring the contractor(s) are complying with the standards and specifications of the contract documents through observation, measurements, and testing as well as tracking quality assurance progress.
Undertaking all site supervision and inspections
Notre Dame University - Cotabato City
ELECTRICAL DESIGNER / FACULTY – OCT.2000-2011
DUTIES AND RESPONSIBILITIES:
Teaching Design Procedure as per PEC 1 & 2 standards.
Design Consultant for various electrical projects
Implementation of design software for electrical system, lighting system, motor control system & PLC.
Bulacan Bottling Company Inc. - Meycauayan, Bulacan ELECTRICAL ENGINEER - MARCH 2000 to August 2000
DUTIES AND RESPONSIBILITIES:
Preparation of design calculations & updating the electrical drawings for multiple motor’s loads
Supervise design to design standards as required by the project. Preparing technical specifications and reports.
Supervise engineers and CAD operators in all project related matters.
HAYAMA Industrial Corporation- Novaliches, Quezon City ELECTRICAL ENGINEER - December 1999 to March 2000
DUTIES and RESPONSIBILITIES:
Preparation of design in industrial installation of conveying system.
Assist in the automation of conveying system using conventional and PLC system.
Supervising and managing the preparation of design calculations.
Supervising design according to local rules, regulations and design guides.
Preparing technical specifications and reports.
Responsible for QA and the checking of all design work carried out prior to formal issue.
Coca-Cola Bottlers Philippines Inc. – Manila City ELECTRICAL ENGINEER - September 1999 to December 1999 DUTIES AND RESPONSIBILITIES:
Design & re-design various loads and update the electrical drawings.
Implement appropriate methods to minimize the downtime in their operations.
Monitoring and inspecting Installation of Electrical
Representatives and Element Manager to flag and rectify any issues which may affect the operation or function of any Electrical networks and bottling company lighting components or systems.
Provide reports on the progress of the Electrical networks aspects of the project.
Notre Dame University - Cotabato City
ELECTRICAL DESIGNER / FACULTY – JUNE 1996-1999;
DUTIES AND RESPONSIBILITIES:
Teaching Design Procedure as per PEC 1 & 2 standards.
Teaching mathematics and electrical engineering subjects particular on the design of lighting system and industrial system.
Demonstrate the use of electrical calculating software such as PLC-LOGO
(automation design), AUTOCADD (drawing skills), ETAP (design analysis), ECODIAL (Schneider design software), DIALUX (lux calculations), ESS
(motor control simulation)
Prepare and revise syllabus for the currents trends on technology.
Inspire students in preparations for their professional career with emphasis on passing the board examination.
Linking the academe and industry to gain students with electrical technical skills and apply the basic building blocks learned from the classroom.
Enhance laboratory equipment and software to be able them to equipped with the latest trend in technology
JFS Engineering Services - Davao City
ELECTRICAL ENGINEER- October 1995 to June 1996
DUTIES AND RESPONSIBILITIES:
Design preparations of electrical system for various commercial and industrial projects
Work closely with civil and mechanical contractors to ensure the proper layout of electrical cables and pipes, lighting system and power outlets, motor controls and switchgears.
Responsible for the electrical distribution design (low voltage), grounding, generators, uninterruptible power static, low power and medium voltage motors, power quality, lighting, fire alarm systems and other security affecting buildings or production facilities of our customers.
Performing interdisciplinary coordination, monitoring of budget and schedule, site supervision and communicate directly with the client to understand the expectations, share solutions and communicate the progress of its projects
ACADEMIC QUALIFICATIONS:
Master of ENGINEERING in Electronics & Communication Engineering Dela Salle University, Taft Avenue, Manila, Philippines
Bachelor of Science in Electrical Engineering
Notre Dame University, N.D. Avenue Cotabato City, Philippines AREAS OF EXPERTISE:
Testing and Commissioning of Electrical System
Protection Engineer
Design & Installation for Low Voltage and Medium Voltage Switchgear
Power Quality Monitoring and Testing of Electrical Equipment
Construction of Power Plant, High-Rise Building & Industrial Automation
Teaching Engineer
PROFESSIONAL EXAMINATION:
UPDA GRADE A - QATAR
ACPE/AER Registered Engineer
Professional Electrical Engineer
Registered Electrical Engineer
National Certificate II (Building Wirings and Installation)
Civil Service Sub-Professional Examination
REFERENCE PERSONS:
ENGR. DANILO ARAQUIL
SPTI ELECTRO-MECHANICAL SUPPLIES AND ALLIED SERVICES China Town Purok Satellite Market, Brgy. GPS.,
Koronadal City South Cotabato
E-mail: **********@*****.***
MR. SIMON MARSH
Director- SPECIALIST INDEPENDENT BUILDING SERVICES DOHA, STATE OF QATAR
E-mail: ******@*********.***
ENGR. DANILO C. PADAS
Dean-College of Engineering
Notre Dame University
N.D. Avenue Cotabato City
E-mail: *******@*****.***