Electrical Engineer Petroleum
Resume:
ELECTRICAL ENGINEER
HARIS K A
**********@*****.***
An Electrical Engineer with 8+ Years EPC experience within Oil and Gas, Petroleum & Petrochemical industry that has included exposure to all facts of engineering and construction activities. Possessing knowledge in all aspects of Electrical in designing and detail engineering and site activities.
CAREER OBJECTIVE
To be part of a reputed organization to pursue a career in the field of Electrical Design Engineering, utilize my potential for the growth of the company and always adhering to work ethics. PERSONAL SUMMARY
• Total Experience = 8+ Years
• Experience in detail engineering design (EPC) activities of Electrical system.
• Good Knowledge of Oil & Gas, Petrochemical industries, Water treatment plants etc
• Good knowledge on drawings (Electrical Drawings, co-ordination drawing, layout drawings
& Review of Process Flow diagram, P & ID, isometric drawing & Plot plan).
• Power system study (Load flow) by using E-tap 18.1.1 software.
• Indoor and Outdoor Lighting design calculation using Dialux 4.13 & Evo software.
• 3D Model review by using Navisworks Freedom 2021.
• Bachelor’s degree in Electrical & Electronics Engineering with First Class.
• Excellent communication skills both written and verbal. PROFESSIONAL EXPERIENCE AND ACHIEVEMENTS
FORTUNE ENGINEERING & ENERGY SERVICES FZCO, DUBAI, UAE (MARCH 2021 – PRESENT) Designation: Electrical Engineer
Projects (Handled)
CLIENT : MARI PETROLEUM COMPANY LIMITED(MPCL)
CONTRACTOR : PRESSON DESCON INTERNATIONAL PVT LIMITED (PDIL) PROJECT : SUPPLY OF AMINE SWEETENING UNIT GAS PROCESSING GORU-B FACILITY Projects (On-going)
CLIENT : PETROLEUM DEVELOPMENT OMAN (PDO)
CONTRACTOR : PETROFAC
PROJECT : CONDENSATE STABILISATION & HYDROCARBON DEWPOINTING PACKAGE Duties
• Detailed Engineering Design activities.
• Vendor Document Reviews includes cables, Junction Boxes, Electric Heater, Heat tracing, LV & HV Motors, Catalogues etc.
• Conduct meeting with Vendor for technical clarifications.
• Issued and get approval from Client for all the engineering deliverables before purchase order placed.
WORLEYPARSONS WLL, QATAR (AUGUST 2019 – APRIL 2020) Designation: Electrical Engineer
Projects (Handled)
Duties
• Feed and Detailed Engineering Design and construction support activities.
• Review the Basis of Design (from the Client) with Lead and finalise the feasibility of the Design proceedings.
• Prepare the Detail Engineering Basis as per the Project scope and issue the Document control Register for the client review and approval.
• Preparation of Adequacy checks Report.
• Conduct the site visit for checking the existing system before start the engineering design if required.
• Prepare Electrical system design of assigned projects based on the required standards (IEC, BS, IS, IEEE, shell DEP etc )
• Based on the DEB, Prepare the Datasheets & specification (HV Switchboard, MV Switchboard, LV Switchboard, HT & LT Motors, HV & MV/LV cables, AC & DC UPS, Switchgears, power distribution Board, LDB, MLDB, Motor operated Valves, Ring Main unit, Neutral Grounding Resistor).
• One Line Diagrams, Schematic Drawings, Lighting layouts, Small Power layouts, Cable Ladder/tray layouts, Cable routing layouts, Cable Trench section details and Earthing Layouts.
• Preparation of HV/LV Cable sizing calculations.
• Preparation of Load list, Cable schedule, Material Requisition for electrical systems, Electrical Equipment Schedule, DB schedule, MTO & BOQ.
• Issue all the documents as per DCR to our own Discipline Engineers for IDC and we reviewed and incorporate the valid comments from internal departments.
• Issue the IDC approved documents / drawings to Client for their review and approval.
• Review the Client comments and incorporate the valid comments and justify to Client the about the not valid comments.
• Prepared the cable schedule and issued for procurement / construction.
• Prepare the RFQ (Request for Quotation) with the necessary approved Documents / Datasheets / Drawings and Project Detail Engineering Basis.
• Vendor Document Reviews includes cables, Switch motors, local control station, Junction Boxes, GA Drawings, Panel Termination Drawings, Catalogues, Heat tracing etc.
• Sent RFQ for the Electrical Equipments and get the quotations / prepared the CLIENT : QATAR SHELL GAS TO LIQULD (QSGTL) EPCM PROJECTS PROJECT 1 : SPENT CAUSTIC WINTERISATION PROJECT
PROJECT 2 : FGP SPENT CAUSTIC IMPROVEMENT PROJECT
PROJECT 3 : BASE OIL EXPANSION & FEED PROJECT
PROJECT 4 : CO ANALYSER PROJECT
PROJECT 5 : OFF PLOT NAPHTHA PROJECT
comparative statements and conducted technical discussion and commercial negotiation with various vendors. Select the vendor with the best delivery, within budgetary cost with value added support.
• As per the approved operational philosophy, discussed with the vendor and got the Single Line diagrams for HV, LV, Essential LV, Lighting, Emergency and UPS systems etc.
• Based on the Single line diagrams, finalize the Schematic drawings and GA drawings of the Switch Gears, MCC and Distribution boards.
• 3D Model review by using Navis Works.
• Review of Electrical heat tracing isometric drawing & its calculation.
• Preparation of Vendor Technical Queries.
• Responsible for providing timely communications on significant issues or developments to the team.
• Conduct meeting with Vendor for technical clarifications.
• Inter-disciplinary and Intra-disciplinary Interfaces.
• Final engineering document checking.
• Issue and get approval from Client for all the engineering deliverables before purchase order placed.
• Preparation of CSOW & BOQ activities for construction contractor.
• Providing status reports and feedback of work progress to Lead. PETROCIL ENGINEERS & CONSULTANTS PVT LTD, India (JULY 2016 – JUNE 2019) Designation: Electrical Engineer
Projects Handled
CLIENT : KUWAIT OIL COMPANY (KOC)
CONTRACTOR : SPETCO INTERNATIONAL PETROLEUM COMPANY, KUWAIT PROJECT : WK GSF EXPANSION WORKS - NEW TRAIN
CLIENT : KUWAIT OIL COMPANY (KOC)
CONTRACTOR : SPETCO INTERNATIONAL PETROLEUM COMPANY, KUWAIT PROJECT : JURASSIC PRODUCTION FACILITIES (JPF) AT WEST RAUDHATAIN, NORTH KUWAIT
CLIENT : QATAR FUEL ADDITIVES COMPANY LIMITED
CONTRACTOR : PENINSULAR PETROTECH ENGINEERING W.L.L, QATAR PROJECT : EPC FOR NG FILTER
CLIENT : KUWAIT OIL COMPANY (KOC)
CONTRACTOR : GOFSCO, KUWAIT
PROJECT : HEAVY OIL LONG TERM TESTING FACILITY(HOLTTF), NORTH KUWAIT CLIENT : BASRAH GAS COMPANY
CONTRACTOR : EXTERRAN LLC
PROJECT
: BASRAH NGL PROJECT, IRAQ
CLIENT : KUWAIT OIL COMPANY (KOC)
CONTRACTOR : SPETCO INTERNATIONAL PETROLEUM COMPANY, KUWAIT PROJECT
: KHULUD GAS PLANT
Duties
• Feed and Detailed Engineering Design and construction activities at site.
• Preparation of Electrical Design Basis.
• Preparation of Adequacy checks Report.
• Preparation of Datasheets & specification (Gas turbine Generator, Transformer, HV Switchboard, MV Switchboard, LV Switchboard, HT & LT Motors, HV & MV/LV cables, AC & DC UPS, Switchgears, power distribution Board, LDB, MLDB, Motor operated Valves, Ring Main unit, Neutral Grounding Resistor).
• Prepare Electrical system design of assigned projects based on the required standards (IEC, BS, IS, KOC, IEEE)
• Preparation of Single Line Diagram.
• Preparation of Lighting, Earthing and Cable Routing Layouts (cable trench & cable tray)
• Preparation of Electrical Load list, HV/LV Cable sizing calculations, Cable schedule, Lighting Calculations, AC & DC UPS sizing Calculations, Earthing calculations, Hazardous Area Classification Schedule, Electrical Equipment Schedule, MTO & BOQ.
• Design of Earthing & lightning Protection scheme.
• Selection of Transformer/DG capacity and switchgear Rating.
• System Studies like Load flow study by using ETAP software.
• Preparation of Technical Bid Evaluation Documents & Material Requisitions for Various Electrical Equipments
• In responsible for review of various bid received for electrical equipment and prepare the Technical Bid Evaluation report.
• Ex-Hazardous Area Classification Survey of Electrical Equipment in Onshore facilities.
• Having good experience in the review of Vendor Documents and drawings includes cables, Switchgears, motors, GTG, Transformers, local control station, Junction Boxes, GA Drawings, Panel Termination Drawings, Catalogues, Heat tracing etc.
• 3D Model review by using Navis Works.
• Preparation of Vendor Technical Queries
• Conduct meeting with Vendor for technical clarifications.
• Responsible for giving input to other disciplines for the package scope and clearing CLIENT : KUWAIT OIL COMPANY (KOC)
CONTRACTOR : GOFSCO, KUWAIT
PROJECT
: EFP50 REVAMP-210 MMSCFD CRUDE SECTION
CLIENT : CAIRN OIL & GAS, A VERTICAL OF VEDANTA LIMITED CONTRACTOR : L & T HYDROCARBON ENGINEERING,MUMBAI
PROJECT
: CAIRN MANGALA ASP PROJECT (PRE-BID ENGG)
CLIENT : QAPCO (Qatar)
CONTRACTOR : PENINSULAR PETROTECH ENGINEERING W.L.L PROJECT : WWTP POWER DISTRIBUTION & CONTROL SYSTEM PROJECT CLIENT : SCHLUMBERGER
PROJECT : EARLY PRODUCTION FACILITIES ZOHR PROJECT CLIENT : KUWAIT OIL COMPANY (KOC)
CONTRACTOR : CPE (CHINA PETROLEUM ENGINEEERING & CONSTRUCTION, UAE) PROJECT : TRAIN 3 WARA PRESSURE MAINTENANCES
interdisciplinary checks.
• Preparation of CSOW & BOQ for Construction contractor
• Analyze the contract and to examine the relevant scope of work and interfaces.
• Inter-disciplinary and Intra-disciplinary Interfaces.
• Participating in meetings with Clients to finalize specifications and other requirements.
• Responsible for providing timely communications on significant issues or developments to the team.
• Final engineering document checking.
• Taking initiative for self and department improvement.
• Providing status reports and feedback of work progress to Lead.
• Conducts internal seminars and discussion.
• Able to plan work and meet deadlines, manage priorities and highlight concerns that affect the project's/proposal’s progress.
• Good Communication and management skills.
GULF SITE EXPERIENCE
PROJECT : JURASSIC PRODUCTION FACILITIES (JPF)
• Construction and commissioning activities at site (for SPETCO International Petroleum Company, Kuwait).
• Laying of LV, HV cable and control cables as per cable routing layout and section drawing.
• Installation of proper tagging for all electrical equipment like cable, motor,Generator, Transformer, LV and HV panel etc as per Engineering documents.
• Final checking for cable size & location at both ends as per Inspection Test plan and routing Layout.
• Installation of Lighting pole and light fittings as per ITP, installation drawing and lighting layout.
• Installation of Electrical Motors.
• Testing and commissioning of HV and LV motor, HV and LV panel ( cable continuity test, cable insulation test, Winding resistance Test for motors, Control Wiring checking For LCS and panels)
• Attend walkthrough with commissioning team and prepare punch list. Clear all major and minor punch within a week.
• Attend meetings with Vendor and Sub Contractors. DINU ELECTRICALS ‘A’ GRADE ELECTRICAL CONTRACTORS, COCHIN LTD, India (JUNE 2014- JUNE 2016)
Designation: Electrical Engineer
Projects Handled
• New Fire station Building at Kochi Refinery- Erection of LT panel and its Earthing, DB Fixing and Electrical Wiring.
• Erection and testing of 11kV Switch Gear Panel for FCCU indoor substation at Kochi Refinery
• Various Electrical construction activities of LV and HV cables, LV panels, Motors, Lighting Circuits etc
Duties
• Construction activites at kochi refinery
• Laying of LV, HV cable and control cables as per cable routing layout and section drawing.
• Installation of proper tagging for all electrical equipment like cable, motor,Generator, Transformer, LV and HV panel etc as per Engineering documents.
• Final checking for cable location at both ends as per Inspection Test plan and routing Layout. I • Installation of light pole and light fixture as per light layout and installation detail drawing. ADDRESS
S/o Abdul Kareem K V
Kokkadan House
Near Mount Seenia
Hospital A M Road
Perumbavoor P O
Ernakulam
Kerala, India
Pin: 683542
PASSPORT NUMBER
M1064633
PLACE OF ISSUE
COCHIN
DATE OF ISSUE
19/08/2014
DATE OF EXPIRY
18/08/2024
Nature of Site Experience
Leading a team in Electrical Installation, Cable laying, Glanding, Termination, and Commissioning activities of HV and LV Motors in accordance with AFC Drawings. Conversant with P&ID, Electrical load list, Wiring diagram, Cable Schedules, Layout drawings, Data sheets and Electrical manuals.
COMPUTER LITERACY
• MS Word, MS Excel, Navisworks Freedom 2021, PDMS, AutoCAD 2021, Dialux Evo, E-Tap 18.1.1 (load flow study) & Blue beam.
QUALIFICATION
• B.Tech in Electrical and Electronics Engineering from MG University, Kerala (2014)
(CGPA - 6.93/10)
• Plus Two, Asram Higher Secondary School (2010)
• SSLC, Queen Mary’s EMHS, Mudickal (2008)
CERTIFICATIONS
• Electrical Engineer Supervisor Grade B license, Government of Kerala, 2017
• Diploma in Electrical & Fire Fighting system Design from Taiba Engineering consultants
(2015)
• Public Health Engineering design from Tritech Design Academy(2015)
• AutoCAD Software from Tritech Design Academy(2013) PERSONAL PROFILE
Date of Birth : 29 March 1991
Gender : Male
Father Name : Abdul Kareem K V
Nationality : Indian
Languages Known : English, Tamil and Malayalam
Religion & Caste : Islam & Muslim
Marital Status : Married
REFERENCES
Nagesh Chanale
Senior Electrical Engineer
WORLEYPARSONS WLL, Qatar
Mob: +974-********
Ashok
Lead Electrical Engineer
PETROCIL ENGINEERS AND CONSULTANTS PVT LTD
Mob: +91-984*******
Aby K O
Lead Electrical Engineer
DINU ELECTRICAL ‘A’ GRADE ELECTRICAL CONTRACTOR PVT LTD Mob: +91-974*******
DECLARATION
I hereby declare that the details furnished above are true to my knowledge and belief. HARIS K A
Contact this candidate