EDMAR VERDERA DE LEMOS

Email Address: adst37@r.postjobfree.com

Date of Birth: April 9, 1981

Qatar Address: Bldg. 23, Street 12, Zone 55, Al Waab, Doha Home Country: Unit 9342 Fountain Breeze, Paranaque City Contact No: 33023928 / 33669052

Passport No: P7407432B

Profession: Civil Engineer with MMUP Reg. No.#23005 Visa Status: Working Visa with NOC

PROFILE SUMMARY

Edmar is a Civil Engineer with more than 17 years of experience in Construction Industry

(including 14 years in Qatar) as AutoCAD Draftsman, Site Engineer, Quantity Surveyor, Design Coordinator and presently QA/QC Engineer for various projects such as residential and commercial buildings, roads and infrastructures and other such government projects. Edmar is well versed in implementing quality control procedures and project supervision in conducting day to day operation, tests, inspection of materials, site works and documentation and has a very strong background in reviewing technical documents, specifications and drawings.

Over the years, Edmar has gained the experience of working within multi-cultural/multi- discipline teams and clearly understands the philosophy of the “Single-Team Concept” as is proven by his dedication to assisting the sub-contractor both on and off site, achieving their goals and target delivery dates.

EDUCATIONAL ATTAINMENT

Degree Course: Bachelor of Science in Civil Engineering, BSCE University Attended: University of the East – Caloocan City, Philippines Government Exam: Registered Civil Engineer (PRC Certified - Reg. No: 0100431) KEY QUALIFICATION

Performs precise coordination among client, contractor and sub-contractors with regards to project construction to ensure that work implementation meets project requirements.

Implements the project quality plan to ensure adherence with the quality standards, specifications, manuals, and engineering and construction execution.

Experienced in preparing method statement, inspection & test plan (ITP), material submittals and as-built drawings for Civil, Structural & Architectural works.

Competent of reviewing technical submittals (materials, pre-qualification, samples and shop drawings) from suppliers to conform with the approved specifications and project requirements before submitting to client.

Coordinates all the quality inspections through the site QC inspectors and control all non- conformance reports and undertake corrective actions.

Ensure that all inspection requests submitted are accurate and all the attached documents are in updated status.

Performs material inspections for materials delivered at site for its compliance with project requirements and prepare material inspection request (MIR) for consultant’s approval.

Monitors test report records such as concrete test, soil test, steel bar test, and other tests required to ensure compliance as per project requirements.

Experience in QA / QC and Safety Procedure implementation.

Familiar in Quantity Take-off both Pre and Post Tender Preparation.

Knowledgeable in MS Office and Adobe Acrobat, AutoCAD, Primavera, etc. EXPERIENCE RECORD

Excellent both in written and in verbal communication skills.

A fast learner and capable to work on various task simultaneously.

Other Skills: Sanitary/Plumbing and Fire Fighting Works Company: Tedeschia Construction Enterprises Ltd. (Doha-Qatar) Office No.1 10th Floor, Al Gassar Tower, West Bay

Project Name: Package Z-105-01 AUAB Accommodation & Support Facilities Al Udeid Air Base

Designation: QA/QC Engineer

July 14, 2019 – Present

Job Responsibilities:

Assist QA/QC Manager in overall Quality Control of the site and in the implementation of Project Quality Plan.

Prepare Method Statement, Inspection & Test Plan and other related documents as per Approved Drawing and Project Specification requirements.

Correct implementation of Construction Drawings, Method Statement and Inspection & Test Plan during construction work.

Implement all the Quality Control documents on site, assuring that all the inspections are fully implemented as per Project Specification and Standards.

Monitor quality control testing and procedures for conformance to the Project Specification and specified Codes and Standards.

Witness all required tests on site and in the laboratory to ensure conformity of material and works according to the contract specification.

In process and Final Inspection of all civil, infrastructure, roads, hardscape and landscape works carried out at site in coordination with Client/End-User and Third-Party Inspector.

Perform any other duties deemed necessary by the QA/QC Manager. Company: Delma Middle East Enterprises WLL / ICM S.P.A. (Doha-Qatar) Bldg. 186 Al Jazeera Tower, 19th Floor Unit 1903, West Bay Tendering Department

Designation: Technical/Senior QA/QC Engineer

November 27, 2017 – March 18, 2019

Tender Projects: Qatar Petroleum District (5 Packages); Client: QP National Health Laboratories; Client: Ashgal

Transport Education Center; Client: Qatar Rail

Doha Marriott Gulf Hotel, Client; Katara Hospitality Shield 1 & 5, Client; Leonardo

Falcon 1 & Modifications; Client: Qatar Armed Forces Other Tender Projects in GCC Country

Job Responsibilities:

Preparation of company pre-qualification and other related documents.

Review of tender documents on receipt to ensure its completeness.

Ensure that technical tender schedules are complete and accurate.

Responsible for review/preparation of technical documents before submissions.

Ensure that technical submissions are fully complied with all the requirements.

Assist to verify detailed quantity take-off from tender documentations. EXPERIENCE RECORD (CONT)

Company: Delma Middle East Enterprises WLL / ICM S.P.A. (Doha-Qatar) Al Markhya Street N 380, Doha Qatar

Project Name: Package Z-105-27 Strategic Military Facilities Al Udeid Air Base

Project Name: Package Z-105-27A Simulator Complex & Related Infrastructures Al Udeid Air Base

Designation: Senior QA/QC Engineer

March 05, 2013 – November 26, 2017

Job Responsibilities:

Assist QA/QC Manager in implementation of Project Quality Plan.

Prepare QA/QC documents such as, method statement, inspection and test plan and other submittals for approval.

Review quality documents prepared by the sub-contractors.

Monitor quality control testing and procedures for conformance to the Project Specification and specified Codes and Standards.

Witness all required tests on site and in the laboratory to ensure conformity of material and works according to the contract specification.

Ensure that contractor and sub-contractors comply with works' specifications.

Perform any other duties deemed necessary by the QA/QC Manager.

Review documentation from site inspection for project quality compliance. Company: National Waterproofing & Restoration (Doha-Qatar) Al Waab City Building D1-205, 2nd Floor, Salwa Road Project Name: National Museum of Qatar

Al Salata near Corniche

Designation: Design Coordinator

Jul. 16, 2012 – Feb. 28, 2013

Job Responsibilities:

Responsible in attending weekly design coordination and workshop meetings.

Responsible in preparation of all shop drawings and 3D modeling in coordination with other sub-contractors.

Ensure that all shop drawings are conformed to the project specification for the approval of the Designer.

Ensure proper coordination with other sub- contractor’s from time to time to avoid conflict to their own works.

Oversee and monitors all the design and technical works from time to time. Company: National Waterproofing & Restoration (Doha-Qatar) Al Waab City Building D1-205, 2nd Floor, Salwa Road Project Includes: Barwa City Amenities

Industrial Area near Mesaimeer

Piazza Foxhills Lusail

Lusail City near Pearl Qatar

Designation: Site Engineer/AutoCAD Draftsman

Jun. 01, 2011 – Jul. 15, 2012

Job Responsibilities:

Responsible in attending weekly operational, technical and safety management meeting. EXPERIENCE RECORD (CONT)

Responsible in implementing the works and ensure that all approved shop drawings, method statement and specification are strictly followed on site.

Prepares daily work activities, weekly accomplishment, progress monthly billing, variation order and request for information if needed on site.

Prepares material quantity take-off and two weeks look-ahead schedule to maintain the ample stock on site.

Coordinate with other nominated sub-contractor to avoid conflict prior to installation of their own works.

Responsible in attending weekly technical coordination meeting prior to any technical and shop drawing issues.

Prepares all required shop drawings for approval before any execution of works.

Ensure proper distribution of all approved shop drawings for site execution and implementation.

Give immediate information to other Engineers if there is revised drawing to avoid any extra works.

Responsible in all shop drawings required on site from time to time to meet the given schedule on time.

Prepares as-built drawings required for final turn-over of the project. Company: PCSI Global Group of Companies, W.L.L. (Doha-Qatar) Era Building, Bin Omran Street

Project Name: Barwa Commercial Avenue

Mesaimeer, Industrial Area Road

Designation: Design Coordinator/QC Engineer

Jul. 17, 2009 – May 31, 2011

Job Responsibilities:

Responsible in attending weekly design coordination and workshop meetings.

Responsible in preparation of all shop drawings and 3D modeling in coordination with other sub-contractors.

Ensure that all shop drawings are conformed to the project specification for the approval of the Designer.

Ensure proper coordination with other sub- contractor’s from time to time to avoid conflict to their own works.

Oversee and monitors all the design and technical works from time to time.

Ensure that all approved shop drawing; method statement and specification are strictly followed on site.

Prepares material submittal, inspection request and material inspection request on site.

Inspect the work progress prior to any installation and concrete pouring to assure that the works are properly executed.

Oversee the quality of works, inspections and all other related activities from time to time. Company: PCSI Global Group of Companies, W.L.L. (Doha-Qatar) Era Building, Bin Omran Street

Project Name: Qatar Rydges Hotel

Al Sadd near Millennium Hotel

Designation: Site Engineer/AutoCAD Draftsman

Aug. 22, 2008 – Jul. 16, 2009

Job Responsibilities:

Responsible in attending weekly operational, technical and safety management meeting. EXPERIENCE RECORD (CONT)

Responsible in implementing the works and ensure that all approved shop drawings, method statement and specification are strictly followed on site.

Prepares daily work activities, weekly accomplishment, progress monthly billing, variation order and request for information if needed on site.

Prepares material quantity take-off and two weeks look-ahead schedule to maintain the ample stock on site.

Coordinate with other nominated sub-contractor to avoid conflict prior to installation of their own works.

Responsible in attending weekly technical coordination meeting prior to any technical and shop drawing issues.

Prepares all required shop drawings for approval before any execution of works.

Ensure proper distribution of all approved shop drawings for site execution and implementation.

Give immediate information to other Engineers if there is revised drawing to avoid any extra works.

Responsible in all shop drawings required on site from time to time to meet the given schedule on time.

Prepares as-built drawings required for final turn-over of the project. Company: Makati Development Corporation (Manila-Philippines) Alabang, Muntinlupa City

Project Name: UP North Science & Technology Park

UP Diliman, Quezon City

Designation: QA/QC Coordinator

Feb. 03, 2008 - Aug. 21, 2008

Job Responsibilities:

Proper coordination with the Designer, Project Manager and Engineer for the implementation of the construction plan.

Ensure that the required test and inspection are performed, documented and reported, and that reports are maintained for present and future reference.

Ensure and certifies that all materials and equipment to the jobsite comply with the approved request and submittals.

Review and evaluate monthly progress billing of sub-contractors and submit recommendation for approval.

Prepare Request for Information and Site Instruction if there is discrepancy found in the construction drawings.

Inspect the work progress to assure that the works is in accordance with the approved shop drawings and specifications.

Prepare non-conformance report to the Sub-contractor’s Project in Charge and assist in developing corrective actions.

Coordinate with the customer’s QC Inspector from time to time. Company: Agchem Construction & Development Corporation (Philippines) Better Living Subdivision, Paranaque City

Project Name: GMA Network Center Annex

EDSA Kamuning, Quezon City

Designation: Site Engineer/Quantity Surveyor

Mar. 01, 2005 – Jan. 31, 2008

EXPERIENCE RECORD (CONT)

Job Responsibilities:

Responsible in attending weekly operational, technical and safety management meeting.

Responsible in implementing the works and ensure that all approved shop drawings, method statement and specification are strictly followed on site.

Prepares daily work activities, weekly accomplishment, progress monthly billing, variation order and request for information if needed on site.

Prepares material quantity take-off and two weeks look-ahead schedule to maintain the ample stock on site.

Coordinate with other nominated sub-contractor to avoid conflict prior to installation of their own works.

Prepare material quantity take-off and bid proposal and submit to the Consultant/Owner for approval.

Coordinates with the suppliers regarding the cost and availability of the materials to be submit for approval.

Prepare material submittal form of all materials to be use on site for approval of the Consultant.

Prepare material cost comparison for the alternative materials to be use and submit for the approval.

I hereby certify that the above information is true and correct to the best of my knowledge and ability.

Signature:

Contact this candidate