Equipment Operator Heavy

**/**** - **/**** ***** Equipment Operator *

Oak Hill Contractor LLC, Ewing, IL

Operator D5 and D6 dozer with TopCon GPS, Operator 336 Cat Excavator and 340 John Deere Excavator, and Volvo 20 Articulated Dump Trucks. 11/2019 - 01/2022 Heavy Equipment Operator 3

Waste Management of Baytown Texas, Baytown, TX

Operate or tend machinery at surface mining site, equipped with scoops, shovels, or buckets to excavate and load loose materials.

04/2017 - 09/2019 Heavy Equipment Operator

santek enviormental waste services, Cleveland, TN

Operate D6T dozer, D6M dozer, 325C excavator, 313C excavator, 826K compactor, 826G compactor, 936 Track loaders, 725C ADT trucks, 730C ADT trucks, skid steers, farm tractors, etc Monitor gas and water wells for H2S and other environmental treats {like leachete}. Move earth, trash C/D materials, and anything of waste quality.

03/2016 - 11/2016 Tire Technician

Tire Depot, TX

Responsible for proper installation of wheels and tires, balancing wheels, checking for correct fit, rotating tires and repairing damaged tires as necessary. Remount wheels onto vehicles. Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools. Place wheels on balancing machines to determine counterweights required to balance wheels. Identify tire size and ply and inflate tires accordingly. Replace valve stems and remove puncturing objects. Hammer required counterweights onto rims of wheels. Reassemble tires onto wheels. Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools. Inspect tire casings for defects, such as holes or tears. Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles. Glue tire patches over ruptures in tire casings, using rubber cement. Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries. Rotate tires to different positions on vehicles, using hand tools. 06/2015 - 03/2016 Groundsman

Enviornmental Tree Service, BEAUMONT, TX

Prepare for upcoming job, prepare equipment for job, assist supervisor and co- workers, remove tree limbs etc. cut down, cut limbs, plant trees and plants, organize tools, secure heavy equipment on trailers, and watch for any possible dangerous treats to self and co-workers. Plant trees, grass, flowers and cut and edge lawns. Gather and remove litter. Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes. Operate vehicles or powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chain-saws, electric CLIFFORD CARTER

503 N. 2, Livingston, TX 77351

Phone: 936-***-****

Email: ***********@*****.***

Objective

Seeking a position utilizing my experience and strong organizational skills. Ability Summary

Employment History

clippers, sod cutters, or pruning saws. Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering cans. Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws. Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders. Care for established lawns by mulching, aerating, weeding, grubbing, removing thatch, or trimming or edging around flower beds, walks, or walls. Follow planned landscaping designs to determine where to lay sod, sow grass, or plant flowers or foliage. Trim or pick flowers and clean flower beds. Attach wires from planted trees to support stakes.

05/2015 - 06/2015 Laborer

Express Temporary Services, BEAUMONT, TX

Restock machine. Fill order list. Dump product in machines. Clean working areas. Set up machines for production. Set up, operate, and tend equipment that cooks, mixes, blends, or processes ingredients in the manufacturing of food products, according to formulas or recipes. Mix or blend ingredients, according to recipes, using a paddle or an agitator, or by controlling vats that heat and mix ingredients. Clean and sterilize vats and factory processing areas. Select and measure or weigh ingredients, using English or metric measures and balance scales. Turn valve controls to start equipment and to adjust operation to maintain product quality. Press switches and turn knobs to start, adjust, and regulate equipment such as beaters, extruders, discharge pipes, and salt pumps. Observe gauges and thermometers to determine if the mixing chamber temperature is within specified limits, and turn valves to control the temperature. Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors. Fill processing or cooking containers, such as kettles, rotating cookers, pressure cookers, or vats, with ingredients, by opening valves, by starting pumps or injectors, or by hand.

07/2010 - 09/2012 Shipping/Labeling

Pilgrims Pride, Lufkin, TX

•Operate machinery used in the production process, or assist machine operators.

•Examine products to verify conformance to quality standards. •Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions. •Lift raw materials, finished products, and packed items, manually or using hoists. •Count finished products to determine if product orders are complete.

•Mark or tag identification on parts. •Load and unload items from machines, conveyors, and conveyances.

08/2009 - 05/2010 General Clerk

Texas Correctional Industry, Huntsville, TX

Maintained and completed inventory stats as needed to account for what was on hand and what was needed to be ordered. •Prepare and maintained invoices for the shipping department for documents to be shipped. •Direct specified departments or units to prepare and ship orders to designated locations. •Check inventory records to determine availability of requested merchandise. •Review orders for completeness according to reporting procedures and forward incomplete orders for further processing. •File copies of orders received, or post orders on records. 02/2009 - 05/2009 Production Tech II

Texas Correctional Industry, Huntsville, TX

•Receive and count stock items, and record data manually or using computer. •Pack and unpack items to be stocked on shelves in stockrooms, warehouses, or storage yards. •Verify inventory computations by comparing them to physical counts of stock, and investigate discrepancies or adjust errors. •Store items in an orderly and accessible manner in warehouses, tool rooms, supply rooms, or other areas. •Mark stock items using identification tags, stamps, electric marking tools, or other labeling equipment. •Clean and maintain supplies, tools, equipment, and storage areas in order to ensure compliance with safety regulations. •Determine proper storage methods, identification, and stock location based on turnover, environmental factors, and physical capabilities of facilities. •Keep records on the use and/or damage of stock or stock handling equipment. •Examine and inspect stock items for wear or defects, reporting any damage to supervisors. •Provide assistance or direction to other stockroom, warehouse, or storage yard workers. 02/2008 - 03/2008 Shipping/Receiving Clerk

Texas Correctional Industry, Huntsville, TX

•Examine shipment contents and compare with records such as manifests, invoices, or orders to verify accuracy. •Record shipment data, such as weight, charges, space availability, damages, or discrepancies for reporting, accounting, or recordkeeping purposes. •Prepare documents, such as work orders, bills of lading, or shipping orders, to route materials. •Confer or correspond with establishment representatives to rectify problems, such as damages, shortages, or nonconformance to specifications. •Pack, seal, label, or affix postage to prepare materials for shipping, using hand tools, power tools, or postage meter. •Contact carrier representatives to make arrangements or to issue instructions for shipping and delivery of materials.

•Deliver or route materials to departments using handtruck, conveyor, or sorting bins.

•Requisition and store shipping materials and supplies to maintain inventory of stock.

•Determine shipping methods, routes, or rates for materials to be shipped. •Compute amounts, such as space available, shipping, storage, or demurrage charges, using computer or price list.

06/2004 - 02/2007 Production Tech I

Texas Correctional Industry, Huntsville, TX

•Receive and count stock items, and record data manually or using computer. •Pack and unpack items to be stocked on shelves in stockrooms, warehouses, or storage yards. •Verify inventory computations by comparing them to physical counts of stock, and investigate discrepancies or adjust errors. •Store items in an orderly and accessible manner in warehouses, tool rooms, supply rooms, or other areas. •Mark stock items using identification tags, stamps, electric marking tools, or other labeling equipment. •Clean and maintain supplies, tools, equipment, and storage areas in order to ensure compliance with safety regulations. •Determine proper storage methods, identification, and stock location based on turnover, environmental factors, and physical capabilities of facilities. •Keep records on the use and/or damage of stock or stock handling equipment. •Examine and inspect stock items for wear or defects, reporting any damage to supervisors. •Provide assistance or direction to other stockroom, warehouse, or storage yard workers. No degree provided

Apple Springs High School,, None Selected

Electronic Telecommunications

No degree provided

Lee College,, None Selected

breakdown computers all the way to the mother board; install and different operating systems; trouble shoot problems and issues; create portfolios in word 2 Years at College or a Technical or Vocational School Lee College,, None Selected

High School Diploma

Windham School District,, None Selected

Education History

Diesel Mech.

No degree provided

Lee College,, None Selected

06/2008 Electronic Telecommunications

Lee College

05/2004 Diesel Mechanic

Lee College

04/1991 Electrical Trades

Trinity Valley Community College

Heavy equipment operator: track hoe, track loader, bulldozer, compactor, ADT off-road trucks, Occupational Licenses, Certificates and Training

Honors & Activities

Additional Information

Detailed References

Contact this candidate