Mohammad Omar AlAhmad(ADDC & AADC Certified Approved Engineer,

Engineering Registration Card & Good Knowledge in DEWA Regulation) Dubai - UAE

Mobile: +971-********* (Primary) / +971-*********

E-mail: adrwf5@r.postjobfree.com

Professional Summery

Over 10 years of rich experience in Designing, Construction, MEP and Oil and Gas Electrical Engineering Field in UAE.

Objective

Behaving as per organization requirement and serve the company utilizing my professional skills by gain experience to achieve target with high regards to quality and safety. Education

Bachelor of Science Degree in Electrical Engineering, May-2011,

(Al-Balqa' Applied University/ Faculty of Engineering Technology, Amman, Jordan)

Secondary School Certificate Khalifa Secondary School 2006/2005, (Al-Ain, UAE) Work Experience

Company: United Engineering and Electromechanical Contracting L.L.C -Abu Dhabi/UAE June- 2020 –till present (Till now)

Position: Electrical Project, Site &General Engineer Projects:

1- Al Shams tower B2+B1+G+14 –Abu Dhabi.

2- LULAT AL RAHA building B3+B2+B1 +G+8+RF –Abu Dhabi. 3-(P1+P2+P3+ G+25+RF) Dream Tower Project –Dubai.

Job Responsibility

Supply,installation,testing and commissioning of ELV System, Security system as the CCTV

,Gate barrier and access control system and Fire system fire alarm and voice evacuation and central battery system and structure cabling as the telephone and SMATV and Electrical System as the lighting and power .

Coordinate with other departments, e.g. Civil Engineers, Structural Engineers etc. to avoid any conflict.

Coordination with consultants for inspections to get approval for RFI, MR,IR,NCR,T&C Inspection,TQ/FCRSs

Takeoff the Quantities for all Electrical System such as (Light,Power,Fire alarm,Voice Evacuation, SMATV,Telephone,Lv cable,Lv Switch Gear MDB,SMDB,FDB and cable tray

….etc….)

Supervision the site activity and solve all the electrical problems.

Review the drawings and coordinate with consultant and send RFI to the consultant in case any conflict between the services.

Preparing, scheduling, coordinating and monitoring the assigned engineering projects

Prepare and control and follow the MEP Variation, Cost Analysis and value Engineering with the Supplier.

Control & Monitor the Engineering work.(Material Submittal, Shop Drawing, R.F.I as per the baseline diagram) with Consultant and Supplier

Design and submit the Shop drawing as per the agreed logs

Design and develop Electrical System Same the calculation of breaker size, Cable size, Single line diagram and load schedule For LV Switch gear, SMDB and FDB.

Design and calculation for the Bus bar Riser in terms of voltage drop and no’s of tap off

Design and calculation for the induction motor by starters, Soft starter, VFD, Star delta and DOL.

Design and calculation for the capacitor bank,UPS,ATS,changeover switch and bus coupler.

Control the site team and daily discussion with managements the site progress and daily report and prepare the plan for next day

Follow Up the Manpower distribution at site and monitor all Site member to achieve the target of the progress

Follow up with draughtsman regarding MEP coordination drawings RCP and all drawings

Follow up with the supplier regarding the Materials delivery, Material submittal and specialist drawings.

Weekly Meeting with Client,Consultant, Main Contractor and site staff regarding the updates points and important things at site in terms of progress and planning and Engineering Work,

Follow up with procurement department regarding the LPO and Prepare the material order and follow up the inquires with Procurement department.

Prepare the comparison sheets between quotations Company: Best Contracting Company L.L.C-Dubai/UAE Jan- 2017 –till May- 2020 Position: Electrical Project Engineer (Coordinator)& Site Engineer Projects:

1-(B1+ G+19) Noor Tower Project –Dubai.

2- Liwa TOWER B+G+25 –Abu Dhabi.

Job Responsibility

Supply,installation,testing and commissioning of Electrical System: Fire alarm System, Emergency light system, Lighting, Power, SMATV, Telephone, LV Switch gear, SMDB & FDB,Earthing & Lightning protection system,LPG System and access control system Home automation, GRMS and lighting control system

Coordinate with other departments, e.g. Civil Engineers, Structural Engineers etc. to avoid any conflict in the site and drawings

Control & Monitor the Engineering work.(Material Submittal, Shop Drawing, R.F.I as per the baseline diagram) with Consultant and Supplier

Design and submit the Shop drawing as per the agreed logs

Design and develop Electrical System Same the calculation of breaker size, Cable size, Single line diagram and load schedule For LV Switch gear, SMDB and FDB.

Design and calculation for the Bus bar Riser in terms of voltage drop and no’s of tap off

Design and calculation for the induction motor by starters, Soft starter, VFD, Star delta and DOL.

Follow up the to collect the NOC Design drawings from Consultant

Prepare the shop drawing and follow up the same with consultant and draughtsman department and supplier up to collect the NOC construction

Reply to consultant and authority comment on the Materials submittal and shop drawings and follow up the same with consultant and supplier

Handle over works to Authority up the Completion certificate from Municipality

Prepare the As built drawings and operation and maintenance.

Follow up the snag works.

Follow up the Materials and shop drawings log sheer with DC and take action against any objection with supplier or consultant

Follow up the Work inspection materials inspection Log sheet and with QAQC and take any action against and objection with supplier or consultant

Follow up the meeting with client and consultant and main contractors and invite the sup[lier to attend the same and follow all related points which is under MEP scope at minutes of meetings

Company: MAG International Contracting Company L.L.C – Dubai/UAE Dec 2014 –till Dec 2016

Position: Electrical Project Engineer & Site Engineer Project:

1-My City Center project in Al Barsha South / Dubai 2-Maoism tower B3+B2+B1+GF+32 floors in JLT/Dubai

3-150 Villa Palm Jumairah

Job Responsibility

Supply,installation,testing and commissioning of Electrical System: Fire alarm System, Emergency light system, Lighting, Power, SMATV, Telephone, LV Switch gear, SMDB & FDB,Earthing system,LPG System and access control system Home automation, GRMS and lighting control system

Complete the testing and commissioning tasks at project as per project progress.

Ensure compliance to all relevant QHSE procedures and controls across Engineering function to guarantee employee safety, Health, Legislative compliance, Delivery of high quality products / Service and a responsible environmental attitude.

Maintain all QA and QC documents legible (e.g. complete, Updated and approved).

Discus the payments with Engineer and Managements

Good knowledge with DEWA,AADC,SEWA Regulation.

Follow with EMAAR and DAMAC to collect the Design and Construction NOC

Supervision for the solar system on Grid and off Grid system

Follow up with Estimation Department and QS Regarding the tender Quantities,IFC and shop drawing Quantities

Follow up the all the Tender Documents and IFC Drawings and Project Specification.

Prepare the BOQ as Required.

Prepare the Proposal and disuse with Consultant to take Approval.

Monitor project progress to ensure schedule and budget targets

Prepare quotations and continue following up and supporting the tender team post tender submission as required

Planning the engineering work in the project (Take off, the man power histogram, material order).

Ensure that MEP site instruction/NCR are closed out

Release the clearance for the Mani contractor to resumption his activity and the concert, Plaster ceiling and waterproof.

Follow Up the safety (HSE,PPR) Instruction at the site.

Coordination with consultant for the engineering work submission, site inspection & material inspection.

Dealing with authority/ DEWA, Civil Defense, Du & Etisalat for construction NOC.

Assist the construction manager to establish project objectives, procedures, data collection methods, and performance standards within boundaries of corporate policy

Manage compliance, quality control, and quality assurance standards and specifications

Supervise and ensure adherence to QA/QC and HSE policies to ensure quality and guarantee safe& healthy work place.

Hand over as-built drawings, operation and manuals, Method of statement and method of installation and Snag works.

Coordinate with ADDC,DEWA,Civil Defens,DU,Etisalat,Abu Dhabi and Dubai Police in terms of Getting the Inspection and NOC and completion Certificate.

Follow up with Electrical Authority to getting the KWHR Meters by Connection Department .

Traking The ADDC,DEWA Application or shut down and Energize our Substation.

Receive snag lists from consultants, arrange sub-contractors for various works, and monitor all jobs for timely completion, including timely attendance during defect liability period..

Follow up the materials stock report with the store Keperand all the Materials requirements at site.

fully responsible for creating the test reports based on cabling, terminations, power management, DB Schedule list assigning to the MEP providers, Shop Drawing updating based on site amendment, corrections phase, inspection and final certification activities, also training the PE on the type of formats used for reporting and the procedure of dimensioning and designing on the drawing proposed layouts.

Supports pre-sales engineers on new design,Components, or Material suggestions, site amendment design, BOQ variation adding devices or replacement with full spec/data sheets, review pre-qualification of the different products and proceed to procurement Oversees emergency breakdowns rectification and intervention based on expertise of the system.

Produce equipements&builder- work scope Schedule for all MEP equipment detailing construction and maintenance requirement for equipment’s

Review of method statements from MEP contractor with respect to installation work sand logistics for equipment positioning"

assist internally QS and Planning department for update MEP system progress"

provide technical advice to construction team.

oversee MEP service installation under civil contractor scope of works.

Close inspection for MEP contractor installation works."

Carry out site walks and inspection for service installation, identifying poor quality elements and advise construction team and MEP Manager.

Carry out inspection for MEP Contractor material along with QA/QC and Consultant."

inspect concealed MEP service installation prior to closure of void /riser etc inconjunction with QA/QC and obtaining consultant sign off"

"Ensure that Company HSE policies are implemented at site in coordination with HSEdepartment"

I am Ready to take any approval for DEWA,AADC,SEWA Exams

Company: Nael Bin Harmal Hydro Export – Envicon Emirates, Abu Dhabi-UAE, 2011 June till Dec 2014

Position: Electrical Site Engineer

Projects:

60 Villas Complex Residential - Abu Samra - Al Ain

Al Rasheed Tower project – Abu Dhabi

Infrastructure (HV + LV cable laying + substation 33/11KV + 11KV/400V+ 132kv/22kv + 22kv/400volt )

+ feeder pillar + services turrent +street lighting pole )

Street Lighting Poles Installations - Al Daher – Al Ain

Development and upgrade of treatment plant(electrical and instrumentation) (pump station) – Madeenat Zayed – Abu Dhabi (Oil and Gas)

Development and upgrade of treatment plant (electrical and instrumentation ) (pump station) – Ghayathi – Abu Dhabi(Oil and Gas)

Patching Plant – Al Ain

Infrastructure for installation of street lighting poles, feeder pillars, cable laying & substations. Yas Island (Oil and Gas)

Job Responsibility

Supervision the installation of Electrical System: Fire alarm System, Emergency light system, Lighting, Power, SMATV, Telephone, LV Switch gear, SMDB & FDB,Earthing system,LPG System and access control system .

Reports to the SPM of the team he belongs to, on project progress and on any required intervention to resolve problems with suppliers, contractors and/or client

various types of subcontractors, etc.

Responsible to ensure correct implementation of the project quality plan, procedures and productivity/scheduling targets related to all MEP works in accordance with project schedule.

Review MEP contractor shop drawing prior to submittal for service co-ordination and co-ordination with other construction elements

"To advice on any impact on services caused by Architectural changes and raise Query to MEP

Review material/equipment’s technical submittals from MEP contractor for specification compliance"

Installation for the transformer Step up Step Down.

TRM and QRM Installation

Prepare the Works and Materials Inspection and follow up with Consultant.

Road crossing work sleeves and rope.

Manhole installation for sleeves and rope.

Plans, coordinates and prioritizes assigned work to meet changing project needs / requirements.

Execution and Delivery - Monitors work to ensure project is built on schedule as per the contractual program.

Directs / coordinates installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, local codes, and customer requirements.

Taking responsibility for Electrical design and documentation.

Developing reports, calculations, maps, drawings, tests scripts, and other data to plan and design systems, components and sequence of operations.

Manpower - Ensure optimal utilization and demobilization of labor

Effective utilization of vehicles, plant and tools.

Relationship Building - Effective co-ordination with the Client, Consultant and other contractors

Holds broad knowledge of principles and practices of related technical areas.

Make the official letter and reply to Engineer and Client .

Reply for all Relevant Emails and letters for the MEP Works as proper. Qualifications & Certificates

SCADA ( Supervisory Control and Data Acquisition) 01/01/2009 till 01/05/2009

Basic Fire Fighting (Certificate As Per ADCO Requirements)

Basic First Aid (Certificate As Per ADCO Requirements)

ADCO Permit to work system (Certificate As Per ADCO Requirements)

PLC (Programmable Logic Controller) 12/02/2011 till 12/03/2011

CNC (Computer Numerical Control) background (Self Studying).

Programming with MATLAB 11/4/2009 till 17/6/2009

C++, Assembly (Basic).

AutoCAD 2015/2014.

Skills

Good communication skills and logical thinking.

I Have Good Knowledge with DEWA,ADDC,SEWA,AADC

Able to adapt with rapid changes

Hard worker and good team player

Self-motivated and approach to work.

Able to trace the way of problems & troubleshoot shortly.

Microsoft Office Word, Excel 2015, Windows 8, 7.

Languages

Arabic (Native)

English (Very Good in Speaking, Listening, Reading & Writing) Personal Information

Marital State – Single

Nationality – Jordanian

Date of Birth – 10thJanuary 1988

Language:Arabic(Native &English)

Driving License – UAE, Jordanian, & International Driving License.

VISA Status – Residency Visa & able to transfer.

Membership in JEA (Jordan Engineers Association) 2011 References: Available upon request.

Contact this candidate