General Labor Carpenter Helper

Location:

Pensacola, FL

Posted:

July 26, 2022

Contact this candidate

Resume:

**/**** - **/**** *****

Skanska USA Civil Southeast, Pensacola, FL

Lubricate machinery, change parts, or perform other routine machinery maintenance. 04/2020 - 08/2020 Warehouse

Cwr Electronics, Tampa, FL

Manually move freight, stock, or other materials or perform other general labor. Includes all manual laborers not elsewhere classified. 09/2018 - 04/2020 General Laborer

Plant City Housing, Plant City, FL

Help installation, maintenance, and repair workers in maintenance, parts replacement, and repair of vehicles, industrial machinery, and electrical and electronic equipment. Perform duties such as furnishing tools, materials, and supplies to other workers; cleaning work area, machines, and tools; and holding materials or tools for other workers.

05/2011 - 04/2018 Furnace Operator

Gopher Resources 813-***-****, Tampa, FL

Operate machinery used in the production process, or assist machine operators.

Examine products to verify conformance to quality standards. Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.

Lift raw materials, finished products, and packed items, manually or using hoists.

Count finished products to determine if product orders are complete. Mark or tag identification on parts.

Load and unload items from machines, conveyors, and conveyances. Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment.

Clean and lubricate equipment.

Record information such as the number of products tested, meter readings, and dates and times of product production.

08/2007 - 02/2008 Carpenter

AWS Carpenter Contractors 813-***-****, Oldsmar, FL

•Shape or cut materials to specified measurements, using hand tools, machines, or face image WILLIAM LAWSON

2513 SEA ROBIN RD, Pensacola, FL 32526

Phone: 850-***-****

Alt Phone: 850-***-****

Email: ********@*****.***

Objective

A position in the Construction, General Labor, or Warehouse industry, but open to learning new skills Ability Summary

Experience in constructing, erecting, installing, and repairing structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools.Also experienced in driving forklifts and loaders. With computers and scanners also.

Employment History

power saw.

•Follow established safety rules and regulations and maintain a safe and clean environment.

•Measure and mark cutting lines on materials, using ruler, pencil, chalk, and marking gauge.

•Install structures and fixtures, such as cabinets,counter tops, windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.

•Verify trueness of structure, using plumb bob and level.

•Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, and power tools.

•Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue.

•Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.

08/2006 - 08/2007 Carpenter

Paul Kearse Carpentry 802-***-****, Tampa, FL

•Shape or cut materials to specified measurements, using hand tools, machines, or power saw.

•Follow established safety rules and regulations and maintain a safe and clean environment.

•Measure and mark cutting lines on materials, using ruler, pencil, chalk, and marking gauge.

•Install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.

•Verify trueness of structure, using plumb bob and level.

•Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, and power tools.

•Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue.

•Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.

08/2005 - 10/2005 Carpenter

Craftwork Inc. 407-***-****, Sanford, FL

•Shape or cut materials to specified measurements, using hand tools, machines, or power saw.

•Follow established safety rules and regulations and maintain a safe and clean environment.

•Measure and mark cutting lines on materials, using ruler, pencil, chalk, and marking gauge.

•Install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.

•Verify trueness of structure, using plumb bob and level.

•Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, and power tools.

•Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue.

•Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.

09/2002 - 11/2002 Night Manager/Stocker

Kash-N-Karry 813-***-****, Tampa, FL

•Answer customers' questions about merchandise and advise customers on merchandise selection.

•Itemize and total customer merchandise selection at checkout counter, using cash register, and accept cash or charge card for purchases.

•Take inventory or examine merchandise to identify items to be reordered or replenished.

•Pack customer purchases in bags or cartons.

•Stock shelves, racks, cases, bins, and tables with new or transferred merchandise.

•Receive, open, unpack and issue sales floor merchandise.

•Clean display cases, shelves, and aisles.

•Compare merchandise invoices to items actually received to ensure that shipments are correct.

•Requisition merchandise from supplier based on available space, merchandise on hand, customer demand, or advertised specials.

•Transport packages to customers' vehicles.

05/1999 - 07/2002 Night Manager/Stocker

Kash N Karry 813-***-****, Tampa, FL

•Answer customers' questions about merchandise and advise customers on merchandise selection.

•Itemize and total customer merchandise selection at checkout counter, using cash register, and accept cash or charge card for purchases.

•Take inventory or examine merchandise to identify items to be reordered or replenished.

•Pack customer purchases in bags or cartons.

•Stock shelves, racks, cases, bins, and tables with new or transferred merchandise.

•Receive, open, unpack and issue sales floor merchandise.

•Clean display cases, shelves, and aisles.

•Compare merchandise invoices to items actually received to ensure that shipments are correct.

•Requisition merchandise from supplier based on available space, merchandise on hand, customer demand, or advertised specials.

•Transport packages to customers' vehicles.

01/1997 - 04/1999 Carpenter Helper

Frame It All, Tampa, FL

•Shape or cut materials to specified measurements, using hand tools, machines, or power saw.

•Follow established safety rules and regulations and maintain a safe and clean environment.

•Measure and mark cutting lines on materials, using ruler, pencil, chalk, and marking gauge.

•Install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools.

•Verify trueness of structure, using plumb bob and level.

•Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, and power tools.

•Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue.

•Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.

06/1995 General High School Curriculum

High School Diploma

Beggs Educational Center, Pensacola, FL

Education and Training

Occupational Licenses and Certificates

12/2021 Forklift

National Forklift Foundation

12/2015 Forklift/Loader

Gopher Resource

Detailed References