Technician Maintenance William Beaumont

Luis Aguirre ***** Hazy Ct. EL Paso, TX ***** ****.*********@*****.*** Cell: 915-***-**** Work Experience :

Valiant Integrated Services

EL Paso TX. FortBliss

(William Beaumont Replacement Hospital)

March 01 of 2022 - June 10 of 2022

Dedicated in electronics Technician maintenance in the Hospital, East Clinic, West Clinic, Administration, Central of Investigation Biological Building

Attending calls from Staff or by Supervisor to repair low voltage electronic devices such as automatic double doors, access controls, nurse call, infant protection system, pneumatic tube system, Wattstopper, electric blinds, Isolation monitors, public announcement system, fire alarm system, elevator service, door alarms, cctv cameras, coiling rolling doors, trans vac sys (waist disposal and linen), and electrical equipment, lighting system 277 vlt, normal power 120 vlt, outlets,GFCI receptacles, troubleshooting with electrical equipment, low voltage and medium voltage.

Performing the preventing maintenance of the systems, monthly and annual, describing on paper work all task and safety steps by government requirements., practicing fire drills by fallowing safety procedures as ISLM of the hospital guide lines and protocols, verify work performance of contractors and supervise the right paperwork of the equipment., comply with all requirement of the government work order and maintain clean and operational all equipment of the buildings and walk through to find deficiencies. Keep up with information to supervisor with material and equipment to be replaced., get all the specs of AHA on every task

Apply a pre-task form to evaluate the task performance and explan the hazards and how to prevent them.

EMCOR Government Services

EL Paso TX. FortBliss

(William Beaumont Replacement Hospital)

March 09 of 2020 - March 01 of 2022

Dedicated in electronics Technician maintenance in the Hospital, East Clinic, West Clinic, Administration, Central of Investigation Biological Building

Attending calls from Staff or by Supervisor to repair low voltage electronic devices such as automatic double doors, access controls, nurse call, infant protection system, pneumatic tube system, Wattstopper, electric blinds, Isolation monitors, public announcement system, fire alarm system, elevator service, door alarms, cctv cameras, coiling rolling doors, trans vac sys (waist disposal and linen), and electrical equipment, lighting system 277 vlt, normal power 120 vlt, outlets,GFCI receptacles, troubleshooting with electrical equipment, low voltage and medium voltage.

Performing the preventing maintenance of the systems, monthly and annual, describing on paper work all task and safety steps by government requirements., practicing fire drills by fallowing safety procedures as ISLM of the hospital guide lines and protocols, verify work performance of contractors and supervise the right paperwork of the equipment., comply with all requirement of the government work order and maintain clean and operational all equipment of the buildings and walk through to find deficiencies. Keep up with information to supervisor with material and equipment to be replaced., get all the specs of AHA on every task

Apply a pre-task form to evaluate the task performance and explan the hazards and how to prevent them.

KT Black Services

VA-Electric in Ruidoso NM

Preformed as commercial hospital facility

Under ground, trouble shoot with power and lighting circuits, installation of J.B., boxes in wall and rough in conduit for different systems hospital code., wire in devices and landing CircuitColors into panels fallowing safety procedures Logout Tagout.

Berg / Helix Joint Venture Fort Bliss, EL Paso TX. March 2015 - March 2019 Lead man in Fire Alarm System, Layout, Blueprints, training, in charge of 4-6 Co-workers, manage material of 7 floors on a new Hospital complex. Worked on different tasks; temp power, lighting, transformers,208/120 vlt, distribution panels,, home runs,spider boxes, S.O.Cords etc., rough in P.V.C.Conduit, Underground, R.M.C, E.M.T, over head work, Wiring, pulling, color coding, trimming, testing. Safety paper work as well practice on the field and receive training on new equipment and identify hazards to work safe and help others with integrity by communicate and prevent incidents or any minor accident. Funk & Company. EL Paso TX. June 2013 - February 2015 Apprentice Electrician Experience with underground installation, blueprints interpretation, inventory of the material and tools, pulling wire, installing transformers,Switch Gears, sub Panels, panel boards, disconnects, water pumps, A/C units, rough in electrical equipment in Schools, warehouses, commercial and industrial buildings. I.E.S Corp. El Paso, TX. February 27, 2012 - August 31, 2012 Apprentice Electrician working under ground, installing conduit, rigid, emt,imc etc., installing electrical panels, pulling wire from 12 awg to 600mcm, wiring lighting fixtures, water pumps, heaters, ac units, installing disconnects, installing temporary power, switch gears, transformers...

B & M Machinery, El Paso, TX. July 2011 - January 2012. Apprentice Electrician Running P.V.C. rigid conduit 6", I.M.C, E.M.T., Rigid liquid tight, etc. installing cable tray for 13.8v, pulling wire, experience with transformers,Switch Gears, sub Panels, panel boards, disconnects, fire watch, hole watch, handling PVC coded in rigid, read blue prints, driving heavy equipment as industrial, man lift, forklift.

Bergelectric, El Paso, TX . July 2009 - October 2010 Apprentice Electrician Working underground P.V.C. rigid schedule 80, installing blue boxes; running as lead of the installation for residential, installing data and fire alarm boxes as conduit; romex, temporary power and lighting, cable tray for all data system, pulling wire manually and with tugger, material handler. Loudon Electric, El Paso, TX. August 2008 - March 2009. Apprentice Electrician Running P.V.C. rigid conduit 1/2"-5", and E.M.T., rigid, installing cable tray for 13.8v, pulling wire, fire watch, hole watch, handling PVC coded in rigid, read blue prints, driving heavy equipment as industrial, man lift, forklift. GC.Services, El Paso, TX. January 2009 - March 2009. Customer Service Agent Helping consumers by receiving and making calls, making orders for electric service, receiving payments,make arrangements provide information, resolve customers issues. Prime Flight Airlines, El Paso, TX. August 2006 - February 2007. Ramp Agent Load and unload passengers baggage from the aircraft, driving tug, 50 ton push back, carts dolly, verify baggage tags and safety verification around the aircraft, park and dispatch the aircraft. West Telemarketing, El Paso, TX. February 2004 - July 2006. Customer Services Receiving and making phone calls to customers about their wireless service, resolve customer's bill adjustments, receiving payment, technical troubleshooting, and teaching and help customers with their device. Moore Service, El Paso, TX. March 2003 - February 2004.

Gate Attendant Verify dangerous hazards, give instructions to the driver of the load, wight federal vehicles, checking info of the waste and material of the disposal load, measure the land and coordinates landfill of Fort Bliss, control the contamination of the same place, report to the city the manifest of the asbestos. Delta Global Service Airlines, Albuquerque, NM. January 2002 - March 2003. Ramp Agent passengers baggage, unload and load mail, and cargo packages, driving tugs, 50 ton push back, carts, dolly etc., park aircraft and dispatch, verifying equipment, cleaning the airplane and check badges of the airport for security rules all times. AVX Corporation, El Paso, TX. October 2000 - January 2002. Export Clerk Consolidate all shipments to same destination to different places local and internationally, receiving, shipping, inventory, material handler, pick orders, light industrial material, packing Q.A., shipping and do manifest of the shipments and dealing with different drivers. Education I.E.C. Electrical Apprenticeship program 6 month per semesters for 4 year completed and received a certificate of completed program. Albuquerque High school,Albuquerque, NM Business Economics, May 1996 Interested in business Economics and Architectural Engineering. Journeyman Electrician certified current year.

10 hours of OSHA traning and certified.

Equipment scissor lift knowledge, boomlift, manlift. My Objective Provide excellent service to contractors and clients while not just meeting company's expectations, but exciting their goals to become a responsible team member.

Contact this candidate